Best Motorcycle Carriers For Trucks for Different Bike Loads

#1 · Best Overall

1. Mockins 83 Tilting Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Car, Truck, Van

Best for: Tilting carrier for wide tires.

Why it ranks #1: Explicitly compatible with trucks and 2-inch receivers, it supports 500 pounds and includes a tilting ramp, hitch stabilizer, hitch lock, and straps.

A tilting ramp and support for tires up to 5.5 inches wide define this Mockins carrier, enabling a broad range of listed bikes to load onto its 83-inch steel frame. Rated for 500 pounds and specified for 2-inch receivers, it pairs loading flexibility with a clear capacity limit.

The tilting ramp is intended to make mounting and dismounting easier, while the 83-by-6-inch frame provides a long track for the bike. The listing supports fat tires up to 5.5 inches wide and loads up to 500 pounds, helping buyers check tire and weight fit together. The included hitch stabilizer and hitch lock add listed hitch hardware, while four ratchet straps and four loop straps provide multiple tie-down pieces. Compatibility includes cars, trucks, and vans with 2-inch receivers.

Skip it if you need a listed 600-pound capacity; the ECOTRIC ET-008A+ET-008B steel carrier is rated for 600 pounds.

This Mockins fits truck owners seeking a tilting ramp, broad tire compatibility, and included securing hardware for a bike within 500 pounds. Check both tire width and receiver size against your setup.

Listed on Amazon as: Mockins 83" Tilting Motorcycle Hitch Carrier with Ramp w/ 500 Lbs. Capacity

#2 · Highest Capacity

2. IRONMAX 600 Carrier

• Load Capacity: 600 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Truck

Best for: 600-pound steel truck carrier.

Why it ranks #2: Lists truck compatibility and a 600-pound capacity, with a loading ramp and two fixing straps included for securing a motorcycle.

A 600-pound rating gives the IRONMAX carrier a higher stated load limit for transporting scooters, street bikes, dirt bikes, or e-bikes. Its carbon steel construction has a black anti-rust coating, while the included loading ramp and two fixing straps provide a specified loading and securing setup.

The 79-by-31-inch carrier is listed for trucks, giving buyers dimensions to consider for rear access and storage. Alloy steel construction and the anti-rust coating are described as suitable for transport in rainy conditions, while the 600-pound rating defines the maximum listed load. The included ramp supports rolling a bike onto the rack, and two fixing straps are supplied to secure it. Hardware and instructions are also included for installation; receiver size is not stated in the supplied specifications.

Skip it if you require a stated 2-inch receiver fit; the VEVOR TD-1004-07 lists compatibility with a 2-inch hitch receiver.

This IRONMAX suits truck owners transporting a motorcycle within its 600-pound limit who want a steel carrier with an included ramp and fixing straps. Receiver size is not specified, so that remains a key fit consideration.

Listed on Amazon as: IRONMAX 600LBS Heavy Duty Steel Motorcycle Carrier with Loading Ramp

#3 · Long Ramp

3. Mockins 73 Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Dirt Motorcycle, Truck

Best for: One-person loading with integrated ramp.

Why it ranks #3: Lists truck compatibility and a 500-pound capacity; its integrated 47-inch ramp, hitch stabilizer, and eight included straps support loading and securing.

A 47-inch integrated ramp on this 73-inch Mockins carrier enables one-person roll-on loading, reducing the need to lift a bike onto the track. The steel rack supports up to 500 pounds and has a 5.5-inch-wide track for fat tires and dual-sport wheels.

The 73.5-by-31.5-inch overall dimensions help buyers plan how the rack will sit behind a truck and where it can be stored. Its integrated 47-inch ramp supports the stated one-person loading workflow, while a 5.5-inch track width accommodates fat tires and dual-sport wheels. The 500-pound capacity establishes the load boundary. A hitch stabilizer and storage bag are included, along with four loop straps and four ratchet straps for securing the motorcycle.

Skip it if you want an 83-inch platform with a tilting ramp; the Mockins MA-HM-DBC-83-TLTS-96 offers both.

Choose this Mockins for a truck owner who values its integrated ramp and one-person loading workflow for a bike within 500 pounds. Its shorter carrier length and 5.5-inch track width are useful fit boundaries.

Listed on Amazon as: Mockins 500 Lbs. Capacity 73" Motorcycle Hitch Carrier with Loading Ramp

#4 · Wheel Chock

4. Black Widow Steel Carrier

• Load Capacity: 600 lb
• Material: Steel
• Compatible with Vehicle Type: Off-Road Motorcycle…

Best for: Traction-coated steel carrier.

Why it ranks #4: Its 600-pound capacity suits heavier bikes, while the 2-inch Class III or IV hitch fit, steel track, ramp, and wheel chock add utility.

Grit-coated traction surfaces on both the track and ramp are this Black Widow carrier’s defining loading feature, helping provide grip as a motorcycle moves onto or off the rack. Its 600-pound capacity and 14-gauge powder-coated steel construction make it a substantial option for compatible 2-inch hitches.

The ramp attaches on the right side, giving loading a set position that buyers can account for when arranging access beside a truck. The track and ramp both have grit-coat surfaces, supporting traction during loading and unloading. Powder-coated 14-gauge steel provides the carrier structure, and the 600-pound rating sets its load boundary. It fits Class III or IV 2-inch receivers and is listed for off-road, street-cruiser, and street-sport motorcycles; the 98-pound item weight is relevant during handling and installation.

Skip it if you need ramp placement on either side; the Black Widow AMC-400 ramp installs on either side of its carrier.

A good match for a buyer with a Class III or IV 2-inch hitch who wants a steel carrier with traction-coated loading surfaces. Its right-side ramp position is a relevant constraint when planning truck-side access.

Listed on Amazon as: Black Widow Steel Motorcycle Hitch Carrier, Wheel Chock, 600 lb, 2 In Hitch

#5 · Aluminum Frame

5. VEVOR 600 Aluminum Carrier

• Load Capacity: 600 lb
• Material: Aluminum
• Compatible with Vehicle Type: Scooter

Best for: Higher-capacity aluminum hauler.

Why it ranks #5: The aluminum carrier lists a 600-pound capacity and includes a self-storing 3.9-foot ramp, but vehicle compatibility is listed as scooter.

A 600-pound capacity paired with aluminum construction defines this VEVOR hitch carrier, giving buyers a higher-rated option among aluminum motorcycle racks. Its 3.9-foot self-storing ramp supports roll-on loading and attaches to the carrier when not in use, so the loading accessory stays with the rack for transport and storage.

The carrier measures 74.8 by 59.06 inches, a substantial footprint to account for when planning truck access and storage. Its aluminum construction and 600-pound capacity target buyers who need a higher listed load rating without choosing a steel carrier. The 3.9-foot ramp reduces reliance on lifting the bike onto the platform, and its self-storing arrangement keeps it attached when the carrier is traveling. The supplied listing specifies a hitch mount but does not state receiver class or size.

Skip it if you require a specified 2-inch receiver fit; the ECOTRIC AI-318 lists compatibility with 2-inch square receivers.

Consider this VEVOR for a buyer seeking an aluminum carrier with a 600-pound rating and an attached, self-storing ramp. Its listed dimensions are substantial, and receiver size is not provided, so those are important boundaries for truck setup.

Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Aluminum Motorcycle Carrier Hitch Mount

#6

6. Goplus 600 Steel Carrier

• Load Capacity: 600 lb
• Material: Steel
• Compatible with Vehicle Type: vehicle with 2" receiver

Best for: Strapped steel carrier for dirt bikes.

Why it ranks #6: A 600-pound steel carrier for vehicles with 2-inch receivers, it includes two straps and a loading ramp and specifies tires up to 7.5 inches wide.

Two straps and a loading ramp give this Goplus steel carrier a defined loading and securing setup, while its 600-pound capacity supports substantial motorcycle loads. Its stated tire-width fit reaches 7.5 inches, making this a relevant option for buyers whose bike has a wider tire.

The steel construction is described as high-strength and suitable for firm motorcycle support, while the 600-pound rating sets a clear load ceiling for choosing a bike. A loading ramp supports rolling the motorcycle onto the carrier rather than lifting it, and the two included straps provide listed securing equipment. The product is specified for tires up to 7.5 inches wide and vehicles with a 2-inch receiver. The listing advises not exceeding 55 mph when carrying a motorcycle.

Skip it if you need a listed 83-inch platform; the VEVOR TD-1004-07 measures 83.46 inches long.

A fit for owners with a 2-inch receiver who value included straps, a ramp, and stated support for tires up to 7.5 inches wide. Observe the listing’s 55-mph guidance when carrying a motorcycle.

Listed on Amazon as: Goplus Motorcycle Hitch Carrier, 600LBS Motorcycle Carrier Hitch Mount with 2 Straps, Loading Ramp, Dirt Bike Trailer, Heavy Duty Motor Cycle Rack, Fit Up to 7.5” Wide Tire

#7

7. ECOTRIC 600 Steel Carrier

• Load Capacity: 600 lb
• Material: steel
• Compatible with Vehicle Type: Dirt Motorcycle

Best for: Steel carrier for heavy bikes.

Why it ranks #7: Its steel construction and 600-pound capacity suit heavier dirt bikes, though listed vehicle compatibility is limited to dirt motorcycles.

A 600-pound rating gives the ECOTRIC steel hitch carrier capacity for heavier listed loads, while its rustproof coating addresses exposure to rainy conditions. The combination makes it a practical option for dirt-bike owners who prioritize a steel frame and weather-conscious surface protection over an aluminum carrier.

The steel construction is described as strong and tough, supporting the product’s 600-pound load rating for a wider choice of motorcycle weights. ECOTRIC also identifies the coating as rustproof, which can help owners who transport bikes in wet weather maintain the carrier’s surface. The listing identifies compatibility with dirt motorcycles, but does not state receiver dimensions or include a ramp in the supplied components; buyers should account for those details when planning installation and loading.

Skip it if you want an included ramp; the Goplus AT4338+XIN listing names a loading ramp and two straps.

This ECOTRIC suits a dirt-bike owner seeking a steel carrier with a 600-pound rating and a stated rustproof coating. The supplied component list does not include a ramp, so factor in your loading method before choosing it.

Listed on Amazon as: ECOTRIC 600LBS Black Motorcycle Carrier Mount Dirt Bike Rack Hitch Hauler |

#8

8. VEVOR 500 Steel Carrier

• Load Capacity: 500 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: Car

Best for: Long steel carrier for 2-inch hitches.

Why it ranks #8: This 500-pound carbon-steel model has an anti-tilt lock device and measures 83.46 inches long, but its listed vehicle type is car.

An 83.46-inch length and steel construction set this VEVOR carrier apart for buyers wanting a long, rigid platform for motorcycle transport. It supports up to 500 pounds and includes an anti-tilt lock device, combining a defined load limit with a listed measure intended to address carrier movement.

The carrier’s 83.46-by-36.22-inch dimensions provide a substantial platform, but also call for planning around truck access and storage space. Carbon steel construction and a powder-coated finish are specified for durability and resistance to corrosion and wear in outdoor environments. At 500 pounds, its rating covers the listed range of motorcycles, scooters, and e-bikes. The 2-inch hitch receiver compatibility narrows fit to that receiver size, while the included accessory kit and user manual accompany the carrier.

Skip it if you need a listed 600-pound rating; the IRONMAX AU10010-HYL is rated for 600 pounds.

This VEVOR is suited to truck owners seeking a long steel platform for a bike within the 500-pound limit and a 2-inch receiver. Its large dimensions warrant careful storage and access planning.

Listed on Amazon as: VEVOR 83" Motorcycle Carrier, 500 lbs Capacity, Heavy Duty Steel Hitch Mount Rack with Anti-Tilt Lock Device, Scooter Dirt Bike Trailer Hauler for Car Truck with 2-Inch Hitch Receiver

#9

9. ECOTRIC 500 Hitch Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Vehicle with 2" square receiver (class II…

Best for: Broad receiver-class compatibility.

Why it ranks #9: It fits 2-inch square Class II through V receivers and includes a ramp, but its 500-pound capacity and unspecified truck compatibility offer less certainty.

Compatibility with 2-inch square Class II, III, IV, or V receivers is the ECOTRIC AI-318’s defining advantage, letting buyers consider a broad range of hitch classes. Its ramp supports loading, and the carrier allows bikes to be loaded from either side for more flexibility around a truck.

The high-strength steel frame is described as resistant to flaking, scratching, fading, and wear, supporting use where surface durability matters. Its 500-pound capacity gives buyers a clear limit for matching a motorcycle to the carrier. The ramp and two-sided loading options can make the loading approach more adaptable to the space around a parked vehicle. Included mounting hardware and installation instructions support setup, while the 75.91-by-32.24-inch dimensions matter when planning storage.

Skip it if you need a listed 600-pound capacity; the Black Widow MCC-600 is rated for 600 pounds.

Choose this ECOTRIC if broad receiver-class compatibility and side-selectable loading matter for your truck setup. Its 500-pound limit is the key boundary, so compare that rating with the motorcycle and any carried accessories.

Listed on Amazon as: ECOTRIC 500LB Hitch Mount Motorcycle Carrier Transportation Racks Hitch

#10

10. Black Widow 400 Aluminum Carrier

• Load Capacity: 400 lb
• Material: Aluminum
• Compatible with Vehicle Type: Motorcycle

Best for: Aluminum carrier for e-bikes.

Why it ranks #10: This aluminum carrier fits Class III or IV 2-inch receivers and includes a ramp and anti-tilt device, but its 400-pound limit is the lowest listed.

Aluminum construction keeps this Black Widow carrier focused on motorcycle and e-bike hauling, with a 400-pound capacity for compatible loads. Its ramp mounts on either side and secures flat when idle, enabling roll-on loading while keeping the carrier more compact for storage between trips.

The 2-inch receiver fit is specified for Class III or IV hitches, giving owners of compatible trucks a direct hitch-mount option without a bulky trailer. The roll-on ramp can be installed on either side, which helps adapt the loading approach to the available space, then lies flat against the carrier when unused. An included anti-rattle device helps minimize movement in transit, while aluminum construction keeps the carrier material distinct from the steel alternatives.

Skip it if you need a listed 600-pound capacity; the VEVOR TD-1004-08 aluminum carrier is rated for 600 pounds.

A suitable choice for truck owners with a Class III or IV 2-inch receiver who want an aluminum carrier and flexible ramp placement. Keep the 400-pound load limit in view when matching it to your motorcycle or e-bike.

Listed on Amazon as: Black Widow Aluminum Motorcycle Hitch Carrier with Ramp for eBike, 400 lb