Best Motorcycle Loading Ramps For Vans: 10 Options Compared

#1 · Best Overall

1. VENDAV 7.5 ft Aluminum Ramp

• Dimensions: 88.98"L x 12.01"W x 2"H
• Weight: 15.5 lb
• Load Capacity: 750 lb
• Material: Aluminum

Best for: Wide-path single-bike ramp.

Why it ranks #1: Its single-track aluminum design measures about 89 by 12 inches and is rated for 750 pounds, with a centered wheel path for motorcycle loading.

VENDAV’s 89-by-12-inch aluminum ramp provides an approximately 11-inch wheel path between its side rails, helping center a motorcycle or dirt bike during loading. The single-ramp configuration is rated for 750 pounds when the load is evenly distributed, and also suits other narrow equipment.

The 12-inch overall width and approximately 11-inch wheel path give riders a clearly defined track for single-track equipment, including motorcycles, dirt bikes, bicycles, and hand trucks or dollies. Its 89-inch length extends the approach into a pickup truck or trailer, while aluminum construction and a 15.5-pound listed weight affect carrying and positioning. The ramp is rated up to 750 pounds when the load is evenly distributed; it is a one-ramp setup for narrow loads rather than a pair for four-wheel equipment.

Skip it if you need a two-ramp set for four-wheel equipment; Stalwart’s 77-inch 75-CAR2024 set provides two tracks.

This VENDAV ramp fits riders seeking one defined, relatively wide wheel path for a motorcycle or dirt bike. Its 750-pound rating requires even load distribution, and the single-ramp format is intended for narrow loads rather than four-wheel vehicles.

Listed on Amazon as: Motorcycle Ramp for Pickup Trucks, 7.5 ft Folding Aluminum Dirt Bike Ramp

#2 · Best for Low Clearance

2. Yutrax Folding XL Arch Ramp

• Dimensions: 89"L x 12"W x 3"H
• Weight: 15 lb
• Load Capacity: 750 lb
• Material: Aluminum

Best for: Low-clearance bike loading.

Why it ranks #2: The 89-inch arched ramp is rated for 750 pounds, folds to 44.5 inches, and its high-traction mesh is designed to help avoid scraping.

Yutrax’s arched 89-inch aluminum ramp provides a gradual loading path intended to help lower-clearance vehicles avoid bottoming out or scraping at the edge. Its 12-inch width and high-traction mesh suit two-wheel loading, while the folding design reduces its length to 44.5 inches for storage.

The arch is the central advantage for bikes with lower clearance: the product description says its gradual shape helps prevent bottoming out or scraping at the loading edge. A high-traction mesh surface adds grip, and rubber-coated tabs protect the vehicle from scratches. The ramp folds from 89 to 44.5 inches, so it is easier to store than its extended length suggests. Aluminum construction supports easier handling; the stated 750-pound capacity sets the load boundary.

Skip it if you need two ramps for a wider four-wheel vehicle; Stalwart’s 77-inch 75-CAR2024 set supplies a pair.

This Yutrax ramp suits a motorcycle owner loading a lower-clearance bike into a truck or trailer, especially when compact folded storage matters. It is a single ramp rated for 750 pounds, so keep the load within that limit.

Listed on Amazon as: Yutrax Single Folding XL Aluminum Truck, UTV/ATV, Motorcycle Loading Arch Ramp, 750lb Capacity

#3 · Lightest Listed

3. MAXIVAMN Aluminum Bi-Fold Ramp

• Dimensions: 89"L x 12"W x 2"H
• Weight: 7.2 kg
• Load Capacity: 750 lb
• Material: Aluminum

Best for: Lightweight single-track loading.

Why it ranks #3: This single-track aluminum ramp measures 89 by 12 inches and is rated for 750 pounds; its listed weight is 7.2 kilograms.

MAXIVAMN’s aluminum ramp weighs 7.2 kilograms and provides an 89-by-12-inch path for motorcycles, dirt bikes, and other single-track equipment. Its 750-pound rating gives buyers a clear load limit, while the folding design supports storage after loading into a pickup or suitable trailer.

The 89-inch length and 12-inch width define a single wheel path for compatible motorcycles and dirt bikes, while the product advises centering the tire and checking tire width. Aluminum construction and the 7.2-kilogram listed weight matter when carrying and positioning the ramp. It is rated for equipment up to 750 pounds, so total load weight is a key selection check. The folding design aids storage, though the supplied specifications do not state its folded dimensions.

Skip it if you need a stated folded length before planning storage; Gorkett’s LR036ZD-6FT lists its folded length as 37.8 inches.

This MAXIVAMN ramp suits riders needing one aluminum track for a motorcycle or dirt bike within its 750-pound rating. Check tire width and center the tire; because folded dimensions are not listed, storage space may be harder to plan precisely.

Listed on Amazon as: Motorcycle Ramp for Pickup Trucks, Aluminum Dirt Bike Ramp, 1 Pack

#4 · Most Compact

4. Gorkett 6FT Folding Ramp

• Dimensions: 72.4"L x 6.4"W x 2"H
• Weight: 8 lb
• Load Capacity: lb 440
• Material: Aluminum

Best for: Compact single-bike transport.

Why it ranks #4: It folds from 72.4 inches to 37.8 inches and weighs 8.03 pounds, though its 440-pound capacity is lower than the other single-bike choices.

At 8.03 pounds, Gorkett’s folding aluminum ramp is easy to carry between a garage and a vehicle, while its 72.4-inch length gives a single-track bike a defined loading path. Folded, it measures 37.8 inches long, making storage in a truck or garage more manageable.

The ramp’s aluminum construction and 8.03-pound listed weight make it a portable option for one person handling a motorcycle-loading setup. Its 72.4-by-6.4-inch unfolded dimensions provide a narrow path for a single-track vehicle, and the fold reduces its length to 37.8 inches for transport or storage. The 440-pound capacity and stated tire-width limit should guide bike selection; this is a single ramp, not a two-track set for four-wheel equipment.

Skip it if you need a 750-pound single-bike rating; VENDAV’s 89-by-12-inch single ramp supports that stated capacity.

This Gorkett ramp suits riders who prioritize a light, foldable single ramp for a compatible motorcycle or dirt bike. Its 440-pound rating and tire-width limit are key boundaries, so compare both with your equipment before loading.

Listed on Amazon as: 6FT Folding Motorcycle Loading Ramp, 440 lb Aluminum Ramp for Bikes

#5

5. VENDAV Punch Plate Ramp

• Dimensions: 89"L x 12"W x 2"H
• Weight: 18.2 lb
• Load Capacity: 750 lb
• Material: Aluminum

Best for: Punch-plate grip for motorcycles.

Why it ranks #5: The 89-by-12-inch aluminum single ramp has a 750-pound rating and raised punched openings for tire grip, but its listed weight is 18.2 pounds.

A raised punch-plate traction surface gives this VENDAV ramp a grip-focused path for loading motorcycles and dirt bikes into compatible pickups or trailers. The folding, single-ramp design is rated for 750 pounds when correctly positioned and secured, and the aluminum ramp measures 89 by 12 inches.

The raised punched openings are specified to help provide tire grip, a practical feature for a motorcycle’s narrow contact path. At 89 by 12 inches, the ramp offers a defined track for single-track equipment, and its folding format supports portability between loading and storage. VENDAV rates it for up to 750 pounds when the load is properly distributed and the ramp is positioned and secured correctly. The 18.2-pound listed weight is relevant when carrying or setting it in place.

Skip it if you prioritize lower listed weight over the punch-plate surface; VENDAV’s 15.5-pound B08GK8JJDV ramp is lighter.

Pick this VENDAV ramp for a motorcycle or dirt bike when a punched traction surface and folding storage matter. Keep the load within 750 pounds and position and secure the ramp correctly; its single-track format is not a pair of tracks.

Listed on Amazon as: Dirt Bike & Motorcycle Ramp for Pickup Trucks, 1 Pack

#6

6. Stalwart 77-Inch Folding Ramps

• Dimensions: 77"L x 8.86"W x 1.57"H
• Load Capacity: 2200 lb
• Material: Alloy Steel

Best for: Long-rise pair for vans.

Why it ranks #6: The pair provides 77-inch ramps and 2,200 pounds combined capacity, but its paired-ramp format and steel construction are less tailored to a single motorcycle.

At 77 inches long, Stalwart’s steel ramp pair gives motorcycles a longer approach into a van, trailer, or shed, with a recommended use height of 38 inches. Each ramp is rated for 1,100 pounds, and together they have a stated 2,200-pound capacity.

The 77-inch length and 38-inch recommended use height help buyers assess whether these ramps can bridge their vehicle’s loading rise. Each 8.86-inch-wide ramp can be used separately for a motorcycle or dirt bike, while the pair serves four-wheel equipment within the combined 2,200-pound rating. Alloy-steel construction provides the ramp material, and the folding design supports storage after loading. The two-ramp format gives a pair of wheel paths rather than a single broad platform.

Skip it if you need to bridge a loading height above 38 inches; Yutrax’s 89-inch TX106 offers a longer single-ramp approach.

Choose this Stalwart pair for motorcycles or dirt bikes going into a van when a long two-ramp approach is useful. Its stated recommended use height is 38 inches, so account for the van floor height before selecting it.

Listed on Amazon as: Loading Ramps – Set of Two 77-Inch Folding Ramps for ATVs, Motorcycles, Mowers, Carts, and More – 2200lb Combined Capacity Car Ramp Set by Stalwart

#7

7. Arejonner 72.5-Inch Ramps

• Dimensions: 71"L x 8.86"W x 3.5"H
• Weight: 34.1 lb
• Load Capacity: 1500 lb
• Material: Alloy Steel

Best for: Traction-focused two-ramp loading.

Why it ranks #7: This pair includes four safety straps and gloves with a 1,500-pound capacity, but its 34.1-pound weight and 71-inch listed length may challenge van loading.

A dense perforated surface with a sandblasted finish gives these 72.5-inch ramps a traction-focused loading surface for motorcycles and other listed equipment. The two-ramp set includes four safety straps and protective gloves, helping buyers secure the ramps and handle installation with the supplied accessories.

The perforations and sandblasted finish are specified to improve friction and load support, which can help reduce wheel slip during loading. Four safety straps are included to secure the ramps, while protective gloves support handling during installation. The pair carries a stated 1,500-pound capacity and measures 71 by 8.86 inches in the specifications, so buyers should consider both the equipment’s weight and the loading geometry. Alloy-steel construction and a 34.1-pound listed weight shape transport and handling.

Skip it if you want a lighter single ramp for a motorcycle; Gorkett’s 8.03-pound folding ramp is the more portable option.

Choose Arejonner if traction features and included securing straps matter for loading motorcycles or other listed equipment. The pair weighs 34.1 pounds and has a 1,500-pound capacity, so factor handling and total load into your setup.

Listed on Amazon as: 72.5" Heavy Duty Folding Loading Ramps with Sandblasted Finish, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves

#8

8. Stalwart 35.5-Inch Ramps

• Dimensions: 35.5"L x 8.5"W x 2"H
• Weight: 9 lb
• Load Capacity: 600 lb
• Material: Alloy Steel

Best for: Short-rise shed and van loading.

Why it ranks #8: The two steel ramps offer 1,200 pounds combined capacity, but their 35.5-inch length is a poor fit for many van loading heights.

Two 35.5-inch steel ramps, each rated for 600 pounds, let you load a motorcycle or scooter as a single-track vehicle, or use the pair for wider four-wheel equipment. Their short, low-profile form suits buyers working with a modest loading rise and limited storage space.

Each ramp measures 35.5 by 8.5 inches, giving a compact track for a motorcycle or scooter rather than the broad platform of a one-piece ramp. The pair can be bolted together to create a 17-inch-wide angled track, though the bolts are not included. Each ramp carries 600 pounds; together, the stated capacity is 1,200 pounds for four-wheel vehicles. Alloy-steel construction supplies the ramp material, while the short length makes the loading height an important fit consideration.

Skip it if you need a longer approach to a high van floor; Stalwart’s 77-inch 75-CAR2024 ramps suit a taller loading height.

Choose this Stalwart set for a motorcycle or scooter and a low loading point, or for compact equipment that benefits from two tracks. Check that the 35.5-inch length reaches your van floor safely; the connecting bolts are not included.

Listed on Amazon as: Loading Ramps – Set of Two 35.5-Inch Ramps for ATVs, Motorcycles, Mowers, Carts, and More – 1200lb Combined Capacity Shed Ramp Set by Stalwart

#9

9. Evcitn 75-Inch Ramps

• Dimensions: 78.7"L x 47.2"W x 7.5"H
• Weight: 36.4 lb
• Load Capacity: 1500 lb
• Material: Iron, Metal, Plastic, Stainless Steel

Best for: Textured pair for mixed equipment.

Why it ranks #9: This 75-inch pair is rated for 1,500 pounds and has textured, perforated surfaces, but its wide two-ramp format is less focused on single-track van loading.

Evcitn’s pair of 75-inch ramps combines a stated 1,500-pound capacity with textured treads and perforated, non-slip surfaces. That combination suits buyers loading motorcycles alongside listed equipment such as dirt bikes, ATVs, UTVs, and lawn mowers, with two separate wheel paths for the pair.

The 75-inch length provides an extended approach for pickup-truck loading, while the pair format gives vehicles two tracks rather than one broad platform. Textured treads and perforations are specified to create a non-slip surface, an advantage when tire grip matters during loading. Reinforced construction and professional welding support the stated 1,500-pound capacity per pair. The product lists stainless steel among its materials and weighs 36.4 pounds, so buyers should consider both the load limit and handling of the set.

Skip it if you need a 1,500-pound rating for one broad ramp; GarveeTech’s 76-by-50-inch C0BQwq5bJxJ7hjh1qVhFTArl7O1l is rated for that total.

Choose Evcitn for a two-track setup serving motorcycles and other listed equipment, with textured traction surfaces and a 1,500-pound pair rating. Keep the total load within the pair capacity and account for the set’s 36.4-pound listed weight.

Listed on Amazon as: Truck Ramps 75" 1500 LBS 2 Pack, Extra Heavy Duty Loading Ramps for Lawn Mower, Portabe Non Slip Motorcycle Ramps for Pickup Trucks, ATV, Dirt Bikes, UTV

#10

10. GarveeTech Tri-Fold Ramp

• Dimensions: 76.38"L x 49.61"W x 1.97"H
• Weight: 38.7 lb
• Load Capacity: 1500 lb
• Material: Aluminum

Best for: Wide tri-fold vehicle platform.

Why it ranks #10: Its 76-inch-wide, 50-inch ramp surface and 1,500-pound capacity target broad equipment loading, making it the least suitable format for a motorcycle in a van.

GarveeTech’s 76-inch-long, nearly 50-inch-wide aluminum ramp creates a broad single-surface loading platform for motorcycles and other listed equipment. It folds to one-third of its size for transport or home storage, while treads and a stated 1,500-pound capacity address grip and load planning.

The 50-inch-wide surface differs from narrow single-track ramps by providing a broad platform for loading the listed motorcycles, ATVs, UTVs, tractors, and lawn equipment. Its treads supply the specified traction feature, while the 76-inch length establishes the approach to the truck bed or trailer. Aluminum construction keeps the platform material distinct from steel options, and the tri-fold design reduces its size to one-third for storage. At 38.7 pounds, positioning it is a handling consideration despite its foldability.

Skip it if you want a lighter, narrow single-bike ramp; Gorkett’s 8.03-pound LR036ZD-6FT folds to 37.8 inches.

This GarveeTech ramp suits buyers seeking a wide platform for motorcycles and other listed equipment, with folding storage after use. Its 38.7-pound weight and 1,500-pound total capacity are important handling and load boundaries.

Listed on Amazon as: Aluminum Tri-Fold Ramp with Treads, Ramps for Pickup Trucks 76"x50"