Best Motorcycle Rack For RV: Hitch Carriers Compared

#1 · Best Overall

1. Mockins Tilting Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Car, Truck, Van
• dimensions: 83 x 6 x 8 in

Best for: Tilting ramp for wide tires.

Why it ranks #1: It fits 2-inch receivers and holds 500 pounds; its tilting ramp, hitch stabilizer, hitch lock, and included straps make it a well-equipped choice.

A tilting ramp and support for tires up to 5.5 inches wide define the Mockins MA-HM-DBC-83-TLTS-96. The 83-inch carrier is rated for 500 pounds and fits 2-inch receivers, giving owners of compatible dirt bikes, scooters, e-bikes, or other listed bikes a loading-oriented hauling option.

The tilting ramp is intended to make mounting and dismounting easier, while the 83-by-6-inch frame provides a long track for positioning a bike. Support for tires up to 5.5 inches wide broadens its fit to fat-tire models, and the 500-pound limit sets a clear payload boundary. Included ratchet and loop straps, a hitch stabilizer, and a hitch lock provide named components for securing the load and carrier during transport.

Skip it if you need more than 500 pounds of capacity; the VEVOR TD-1004-03 is rated for 600 pounds.

Pick this for a compatible 2-inch receiver and a bike with tires up to 5.5 inches wide, especially when a tilting ramp and included securing hardware matter. Keep the 500-pound total load limit in view before choosing it.

Listed on Amazon as: Mockins 83" Tilting Motorcycle Hitch Carrier with Ramp w/ 500 Lbs. Capacity

#2 · Highest Capacity

2. VEVOR Steel Carrier

• Load Capacity: 600 lb
• Material: Q235B Steel
• Compatible with Vehicle Type: Car
• dimensions: 77 x 33.1 x 6.1 in

Best for: Higher-capacity steel carrier.

Why it ranks #2: Its 600-pound capacity is the highest listed, and it includes a 47-inch ramp and stabilizer; confirm receiver fit before RV use.

A 600-pound load rating paired with a 47-inch ramp gives the VEVOR TD-1004-03 a clear role for heavier motorcycles that need roll-on loading. Its 76-by-7-inch carrier space provides a defined track, while included ratchet straps and a stabilizer support securing the bike for transport.

The Q235B steel frame is rated for 600 pounds, making the carrier suitable for motorcycles within that limit. Its 47-inch ramp helps bridge the loading step, and the 76-by-7-inch track provides room for positioning the bike. The listed installation-height range, 7.87 to 19.7 inches from center hole to ground, gives buyers a concrete vehicle measurement to check before setup. Ratchet straps and a stabilizer are named in the product title.

Skip it if you want an aluminum carrier instead of steel; the VEVOR TD-1004-08 uses aluminum and also lists a 600-pound capacity.

This suits riders hauling a heavier motorcycle on a vehicle with a 2-inch receiver and an installation height within the stated range. Choose another option if steel construction or the carrier's 61.7-pound handling weight does not suit your setup.

Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Steel Motorcycle Carrier Hitch Mount with 47" Longer Ramp, Scooter Dirt Bike Trailer Hauler with Ratchet Straps and Stabilizer, for Car, Truck with 2" Hitch Receiver

#3 · Aluminum Capacity

3. VEVOR Aluminum Carrier

• Load Capacity: 600 lb
• Material: Aluminum
• Compatible with Vehicle Type: Scooter
• dimensions: 74.8 x 59.06 x 4.72 in

Best for: Aluminum carrier with stored ramp.

Why it ranks #3: This aluminum carrier offers a listed 600-pound capacity and a self-storing ramp, combining the highest stated load rating with a lighter frame material.

A 3.9-foot ramp that attaches to the carrier when not in use gives the VEVOR TD-1004-08 a tidy loading-and-storage arrangement. Its aluminum construction and 600-pound rating suit buyers looking for a lighter-material alternative to steel while keeping the stated load limit in view.

The self-storing ramp helps keep the loading component with the carrier between uses, rather than requiring separate storage. Aluminum construction provides the listed material choice, and the 600-pound capacity sets the maximum stated load. The listing also says it can carry two motorcycles; buyers must still account for the combined capacity. Its 74.8-by-59.06-inch listed dimensions are unusually broad, so check the available space on the vehicle for the carrier.

Skip it if you prefer steel construction and a narrower listed carrier footprint; the VEVOR TD-1004-03 is steel and measures 77 by 33.1 inches.

This suits buyers wanting an aluminum carrier with a ramp that stores on the unit and a stated 600-pound capacity. Its 68.3-pound weight and listed dimensions merit consideration when handling it and planning vehicle clearance.

Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Aluminum Motorcycle Carrier Hitch Mount

#4 · Lightweight Frame

4. Black Widow Aluminum Carrier

• Load Capacity: 400 lb
• Material: Aluminum
• Compatible with Vehicle Type: Motorcycle

Best for: Aluminum single-bike hauler.

Why it ranks #4: Its aluminum frame fits Class III or IV 2-inch receivers and supports 400 pounds; an included anti-tilt device and ramp aid setup.

A 400-pound capacity and aluminum construction make the Black Widow AMC-400 a lighter-material option for carrying one motorcycle or e-bike on a 2-inch receiver. Its roll-on ramp mounts on either side and secures flat when stored, helping simplify loading and keep the carrier compact between trips.

The carrier fits Class III or IV 2-inch hitch receivers, giving owners of those setups a direct alternative to towing a bulky trailer. The ramp can be positioned on either side, which helps adapt loading to the available space, then lies flat against the carrier when not in use. Aluminum construction and a 400-pound load limit suit a single qualifying bike; the included anti-tilt device helps limit movement in transit.

Skip it if you need capacity above 400 pounds; the VEVOR TD-1004-03 supports up to 600 pounds.

Choose this for a motorcycle or e-bike within the 400-pound limit when a compact, side-positionable ramp and aluminum carrier suit your loading routine. It fits Class III or IV 2-inch receivers, so other hitch classes are outside its listed fit.

Listed on Amazon as: Black Widow Aluminum Motorcycle Hitch Carrier with Ramp for eBike, 400 lb

#5 · Longest Ramp

5. Mockins 73-Inch Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Dirt Motorcycle, Truck
• dimensions: 73.5 x 31.5 x 5.5 in

Best for: One-person ramp loading.

Why it ranks #5: The 73-inch carrier includes an integrated 47-inch ramp, stabilizer, and straps, with 500 pounds of capacity and a five-year limited warranty.

A 47-inch integrated ramp is the central convenience of this Mockins carrier, with the listing describing one-person loading. Its 5.5-inch-wide track accommodates fat tires and dual-sport wheels, while a 500-pound capacity covers bikes within that weight limit.

The 73-inch carrier track and 5.5-inch tire-width support help buyers assess whether their bike can sit on the platform. The 47-inch ramp reduces the need to lift the bike onto the carrier, and the included hitch stabilizer addresses movement at the connection. Four loop straps and four ratchet straps provide named tie-down components, while the listed 51-pound weight is relevant when handling the carrier itself.

Skip it if you need a tilting ramp; the Mockins MA-HM-DBC-83-TLTS-96 specifically lists a tilting design and a 500-pound capacity.

This suits riders who want ramp-assisted loading for a bike with tires up to 5.5 inches wide and a total load no greater than 500 pounds. Factor in its listed 51-pound carrier weight when handling it.

Listed on Amazon as: Mockins 500 Lbs. Capacity 73" Motorcycle Hitch Carrier with Loading Ramp

#6

6. Black Widow Double Carrier

• Load Capacity: 600 lb
• Material: Aluminum
• Compatible with Vehicle Type: Motorcycle

Best for: Two-bike aluminum carrier.

Why it ranks #6: Its aluminum dual-track design carries two motorcycles with 600 pounds total capacity, but the listed 400-pound per-track limit still matters.

Two tracks let the Black Widow AMC-600-2 carry two motorcycles on one Class III or IV 2-inch hitch, with 600 pounds of combined capacity. Its aluminum construction and 69-pound listed weight are relevant for owners who want a dual-bike carrier without using a separate trailer.

Each track has a stated 400-pound capacity, while the carrier's overall load limit is 600 pounds, so buyers need to account for both per-track and combined weight. The ramp installs on either side to support loading where space allows. Aluminum construction helps keep the listed carrier weight to 69 pounds, and the included anti-tilt device addresses movement at the hitch during transport.

Skip it if you need a single-bike carrier with a 47-inch ramp; the VEVOR TD-1004-03 lists that ramp and a 600-pound limit.

Choose this when carrying two motorcycles is the priority and your vehicle has a Class III or IV 2-inch hitch. Check both the 400-pound per-track rating and the 600-pound combined limit before loading.

Listed on Amazon as: Black Widow Double Motorcycle Bike Hitch Carrier, Loading Ramp, 600 lb Cap

#7

7. ECOTRIC 500-Pound Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Vehicle with 2" square receiver (class II…
• dimensions: 75.91 x 32.24 x 9.06 in

Best for: Broad hitch-class compatibility.

Why it ranks #7: It fits 2-inch square receivers across listed Class II through V hitches and supports 500 pounds, though included gear is limited to mounting hardware.

Compatibility with Class II, III, IV, and V 2-inch square receivers is the defining feature of this ECOTRIC carrier. Its 500-pound capacity, steel frame, and included ramp offer a straightforward way to load a motorcycle from either side on vehicles with one of those listed hitch classes.

The broad stated receiver-class range gives buyers more flexibility than a carrier listed for only selected hitch classes, while the 500-pound load rating sets the bike-weight boundary. The ramp supports loading, and the option to approach from either side can help when one side of the vehicle is obstructed. Its steel frame is described as resistant to flaking, scratching, fading, and wear, supporting use where surface durability matters.

Skip it if you need capacity above 500 pounds; the ECOTRIC ET-008A+ET-008B is listed for loads up to 600 pounds.

This is a practical match for riders whose vehicle has a listed 2-inch receiver class and who value loading access from either side. Its 500-pound limit remains the key boundary when selecting a bike and gear.

Listed on Amazon as: ECOTRIC 500LB Hitch Mount Motorcycle Carrier Transportation Racks Hitch

#8

8. ECOTRIC 600-Pound Carrier

• Load Capacity: 600 lb
• Material: steel
• Compatible with Vehicle Type: Dirt Motorcycle

Best for: Rain-ready coated steel hauler.

Why it ranks #8: Its steel frame has a 600-pound capacity and rustproof coating, but the supplied specifications do not state a receiver size or included ramp.

A rustproof coating on the steel carrier is the key practical detail of this ECOTRIC model, which is rated to carry up to 600 pounds. That combination suits dirt-motorcycle owners seeking a robust hitch carrier with a stated surface treatment for use when rain is a consideration.

The steel construction is described as having the strength and toughness to carry a bike firmly, while the rustproof coating is specifically noted for rainy conditions. Its 600-pound maximum capacity accommodates bikes within that limit. The supplied listing identifies it as compatible with dirt motorcycles and includes the carrier mount; it does not provide a ramp or hitch-size specification, so those details should not be assumed from this product information.

Skip it if you want a ramp included for roll-on loading; the Black Widow AMC-400 lists a loading ramp with its carrier.

This fits dirt-motorcycle owners who prioritize a steel carrier with a rustproof coating and whose load stays within 600 pounds. Since the listing names no ramp or receiver size, those needs may call for a different specified setup.

Listed on Amazon as: ECOTRIC 600LBS Black Motorcycle Carrier Mount Dirt Bike Rack Hitch Hauler |

#9

9. IRILIA Tilting Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Dirt Bike

Best for: Tilting platform for e-bikes.

Why it ranks #9: The 79-by-6-inch platform, tilting ramp design, 500-pound capacity, and two-year manufacturer warranty are useful, but receiver fit is not specified.

A tilting ramp design distinguishes the IRILIA carrier, which supports motorcycles, dirt bikes, scooters, and e-bikes up to 500 pounds. Its 79-by-6-inch loading platform fits tires up to 4.3 inches wide and connects to standard 2-inch receivers on cars, SUVs, and trucks.

The tilting ramp is intended to make loading easier, while the 79-inch platform provides a long track for positioning a bike. Its 6-inch width and stated 4.3-inch tire limit give buyers a specific fit boundary, especially for fat-tire e-bikes. The steel carrier is rated to 500 pounds and is listed for standard 2-inch receivers, making hitch compatibility and total bike weight the key checks before a trip.

Skip it if you have tires wider than 4.3 inches; the Mockins MA-HM-DBC-83-TLTS-96 supports tires up to 5.5 inches wide.

Choose this for a motorcycle, scooter, dirt bike, or e-bike within the 500-pound limit that fits its 4.3-inch tire boundary. Its standard 2-inch receiver fit covers listed cars, SUVs, and trucks, not other receiver sizes.

Listed on Amazon as: Tilting Motorcycle Hitch Carrier with Ramp

#10

10. EGO BIKE Steel Carrier

• Load Capacity: 600 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Scooter, Trailer
• dimensions: 75.91 x 18 x 4.75 in

Best for: Steel carrier with anti-tilt lock.

Why it ranks #10: It has a ramp, anti-tilt device, and a stated 600-pound capacity, but the specifications list scooter and trailer compatibility rather than RV fit.

An anti-tilt locking device is a defining inclusion on the EGO BIKE MRC-001, aimed at preventing wobble at the hitch. Its heavy-duty alloy-steel frame and loading ramp give owners of motocross bikes, scooters, or off-road dirt bikes a ramp-equipped carrier option.

The product description says it is designed to carry up to 500 pounds, while the specifications separately list a 600-pound capacity; buyers should treat that discrepancy as a reason to verify the applicable load limit before use. The ramp supports loading without requiring the bike to be lifted onto the platform. An anti-tilt locking device is specified to prevent wobble, and the portable design is another stated handling feature.

Skip it if you need an unambiguous capacity rating; the VEVOR TD-1004-03 consistently lists a 600-pound capacity.

Consider this for a ramp-equipped steel carrier with an anti-tilt lock for a scooter or dirt bike. The conflicting 500- and 600-pound capacity statements make confirming the applicable limit essential before loading.

Listed on Amazon as: 500LBS Steel Motorcycle Scooter Dirtbike Carrier Hauler Hitch