Best Motorcycle Racks For Trucks: Hitch and Bed Options

#1 · Best Overall

1. VEVOR 600 LBS Steel Carrier

• Load Capacity: 600 lb
• Material: Q235B Steel
• dimensions: 77 x 33.1 x 6.1 in
• Weight: 61.7 lb

Best for: Higher-capacity steel carrier.

Why it ranks #1: Its 600-pound rating, 2-inch hitch fit, 47-inch ramp, ratchet straps, and stabilizer make it a well-equipped option for truck hitch hauling.

A 600-pound rating gives the VEVOR TD-1004-03 room for heavier motorcycles than 500-pound carriers, while its 47-inch ramp supports loading onto the hitch-mounted platform. The 76-by-7-inch carrier is intended for vehicles with a 2-inch receiver, making receiver fit and installation height important checks for truck owners.

The Q235B steel construction and 600-pound load rating make this a choice for hauling heavier bikes within the stated capacity. Its 76-by-7-inch platform provides the listed loading space, while the 47-inch ramp helps bridge the ground-to-carrier transition. VEVOR recommends a center-hole-to-ground installation height of 7.87 to 19.7 inches, so measuring that height can help assess the setup before mounting. The carrier itself weighs 61.7 pounds.

Skip it if you want a lighter carrier; the Black Widow AMC-400 is aluminum and rated for 400 pounds.

This suits truck owners prioritizing a 600-pound rating and a longer 47-inch ramp for bike loading. Check the recommended hitch height and ensure your vehicle has a 2-inch receiver before choosing it.

Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Steel Motorcycle Carrier Hitch Mount with 47" Longer Ramp, Scooter Dirt Bike Trailer Hauler with Ratchet Straps and Stabilizer, for Car, Truck with 2" Hitch Receiver

#2 · Longest Platform

2. VEVOR 83-Inch Carrier

• Load Capacity: 500 lb
• Material: Carbon Steel
• dimensions: 83.46 x 36.22 x 15.35 in
• Weight: 70.6 lb

Best for: Long-platform steel hauling.

Why it ranks #2: The 83-inch steel platform and 500-pound capacity suit truck owners needing a longer loading surface; it includes an anti-tilt lock device.

An 83-inch carrier length gives the VEVOR TD-1004-07 a long platform for transporting motorcycles, scooters, and e-bikes within its 500-pound limit. The steel rack also has a powder-coated finish described as resisting corrosion and wear, a practical feature for equipment exposed to outdoor hauling conditions.

The 83-inch overall length provides an extended carrier footprint, while the 500-pound rating defines the maximum supported load. Its heavy-duty steel construction is described as stable and resistant to deformation, and the powder-coated finish is intended to resist corrosion and wear outdoors. An anti-tilt lock device is named in the title, offering a way to secure the carrier at the hitch. The listed vehicle compatibility is car; the title specifies a 2-inch receiver.

Skip it if you want a carrier explicitly listed for trucks; the Mockins MA-HM-DBC-83-TILT-96 lists car, truck, and van compatibility.

This is worth considering for buyers seeking an 83-inch steel platform with a 500-pound rating and a corrosion-resistant finish. Its listed compatibility says car, so truck owners should treat that limitation as important.

Listed on Amazon as: VEVOR 83" Motorcycle Carrier, 500 lbs Capacity, Heavy Duty Steel Hitch Mount Rack with Anti-Tilt Lock Device, Scooter Dirt Bike Trailer Hauler for Car Truck with 2-Inch Hitch Receiver

#3 · Most Complete Kit

3. Mockins 83-Inch Tilting Carrier

• Load Capacity: 500 lb
• Material: Steel
• dimensions: 83 x 6 x 8 in
• Weight: 75 lb

Best for: Tilting ramp with tie-down kit.

Why it ranks #3: This 500-pound steel carrier fits 2-inch receivers and includes a tilting ramp, hitch lock, stabilizer, license plate holder, and straps.

A tilting ramp distinguishes this Mockins carrier, helping with motorcycle loading and unloading while keeping the 83-inch platform suited to bikes with tires up to 5.5 inches wide. It supports up to 500 pounds and lists car, truck, and van compatibility with a 2-inch receiver.

The 83-by-6-inch steel platform and 5.5-inch tire-width limit help define which bikes can sit on the carrier, while the 500-pound capacity sets the maximum load. Its tilting ramp is intended to make mounting and dismounting easier. The included kit adds four heavy-duty ratchet straps, four loop straps, a hitch stabilizer, and a hitch lock, combining loading and securing equipment with the carrier. A license plate holder and accessory storage bag are also listed.

Skip it if you need more than 500 pounds of capacity; the VEVOR TD-1004-03 is rated for 600 pounds.

Choose this for truck owners wanting a tilting ramp, broad listed vehicle compatibility, and included tie-down straps. Keep the 500-pound limit and 5.5-inch tire-width maximum in view when selecting a bike.

Listed on Amazon as: Mockins 83" Tilting Motorcycle Hitch Carrier with Ramp w/ 500 Lbs. Capacity

#4 · Wide-Tire Fit

4. Mockins 83-Inch Dirt Bike Carrier

• Load Capacity: 500 lb
• Material: Steel
• dimensions: 83 x 6 x 8 in
• Weight: 78 lb

Best for: Wide-tire tilting hitch carrier.

Why it ranks #4: Its 83-by-6-inch platform supports up to 500 pounds and tires up to 5.5 inches wide, with a tilting ramp and hitch lock.

Support for tires up to 5.5 inches wide makes the Mockins MA-HM-DBC-83-TILT-96 a candidate for fat-tire e-bikes as well as dirt bikes and scooters. Its 83-by-6-inch steel frame carries up to 500 pounds and fits vehicles with a 2-inch receiver.

The 5.5-inch tire-width allowance and 83-by-6-inch platform help accommodate a wider range of bike tires, while the 500-pound capacity sets the maximum load. A tilting ramp is included to support loading and dismounting. The listed kit also includes a hitch stabilizer and lock, four heavy-duty ratchet straps, and four loop straps, giving buyers several securing components in the package. Vehicle compatibility lists cars, trucks, and vans with a 2-inch receiver.

Skip it if you need a 600-pound load rating; the VEVOR TD-1004-03 is rated for that capacity.

Consider this for truck owners carrying fat-tire bikes or dirt bikes who want a tilting ramp and bundled tie-down hardware. Its 500-pound capacity and 2-inch receiver requirement set the main boundaries.

Listed on Amazon as: Mockins 83" Tilting Dirt Bike Carrier Hitch Mount Rack w/ 500 Lbs. Capacity

#5 · Two-Year Warranty

5. IRILIA Tilting Hitch Carrier

• Load Capacity: 500 lb
• Material: Steel
• Weight: 60 lb

Best for: Narrower fat-tire hitch loading.

Why it ranks #5: The 500-pound steel carrier fits 2-inch receivers, has a tilting ramp, and lists a two-year manufacturer warranty.

The IRILIA carrier’s 79-by-6-inch platform supports tires up to 4.3 inches wide, giving buyers a clear sizing boundary for motorcycle, dirt-bike, scooter, and e-bike hauling. Its tilting-ramp design supports loading, while the 500-pound capacity and standard 2-inch receiver fit define the main setup requirements.

The 79-by-6-inch platform and 4.3-inch tire-width limit help determine whether a particular bike can sit on the carrier, especially for fat-tire models. A tilting ramp addresses the loading process, and the steel construction supports the listed 500-pound load capacity. The carrier is described as compatible with standard 2-inch receivers and cars, SUVs, and trucks. At 60 pounds, it has a stated carrier weight to consider when handling and installing the rack.

Skip it if you have tires wider than 4.3 inches; the Mockins MA-HM-DBC-83-TILT-96 accommodates tires up to 5.5 inches.

This fits buyers hauling a motorcycle, dirt bike, scooter, or e-bike on a standard 2-inch receiver, especially when a tilting ramp is useful. Check tire width carefully; the stated maximum is 4.3 inches.

Listed on Amazon as: Tilting Motorcycle Hitch Carrier with Ramp

#6

6. ECOTRIC 600 LBS Carrier

• Load Capacity: 600 lb
• Material: steel

Best for: Heavy-load coated steel rack.

Why it ranks #6: Its steel construction and 600-pound listed capacity suit heavier bikes, though the supplied details do not specify a ramp or stabilizer.

A 600-pound load rating makes the ECOTRIC ET-008A+ET-008B a fit for heavier motorcycles than 500-pound carriers. Its steel construction has a rustproof coating, pairing the higher stated capacity with a finish intended to resist rust during outdoor use, including rainy conditions noted in the product information.

The 600-pound maximum gives this carrier a defined capacity for motorcycles and dirt bikes, while the steel frame is described as strong enough to hold a bike firmly. ECOTRIC also identifies the coating as rustproof, making the finish relevant for owners transporting bikes in rainy weather. The listing specifies dirt motorcycle compatibility and includes the motorcycle carrier mount. It does not provide a ramp in the supplied included-components information, so buyers should account for their loading method.

Skip it if you want an explicitly listed ramp; the VEVOR TD-1004-03 includes a 47-inch loading ramp.

Choose this if a 600-pound capacity and rustproof-coated steel suit your motorcycle-hauling needs, particularly for dirt bikes. The supplied listing does not name a ramp among included components, so plan loading accordingly.

Listed on Amazon as: ECOTRIC 600LBS Black Motorcycle Carrier Mount Dirt Bike Rack Hitch Hauler |

#7

7. Black Widow Double Carrier

• Load Capacity: 600 lb
• Material: Aluminum
• Weight: 69 lb

Best for: Two-bike hitch transport.

Why it ranks #7: This aluminum carrier is rated for 600 pounds total and is designed for two motorcycles on a Class III or IV 2-inch hitch.

Two separate tracks let the Black Widow AMC-600-2 carry two motorcycles on one Class III or IV 2-inch hitch, avoiding the need for a trailer. Its 600-pound total capacity is divided into 400 pounds per track, so the combined load and each bike’s individual weight both matter.

The two-track layout creates space for carrying two motorcycles together, and the supplied specifications set a 600-pound overall limit with 400 pounds per track. High-strength aluminum keeps the 69-pound carrier lighter than many steel options while supporting the stated capacity. Its roll-on, roll-off ramp installs on either side, giving you a choice of loading direction. An anti-tilt device is included, and the carrier is specified for Class III or IV 2-inch hitches.

Skip it if you only need one bike and prefer a simpler single-track carrier; the Black Widow AMC-400 is rated for 400 pounds.

Pick this for transporting two motorcycles when both track limits and the 600-pound combined capacity suit your load. It requires a Class III or IV 2-inch hitch and weighs 69 pounds.

Listed on Amazon as: Black Widow Double Motorcycle Bike Hitch Carrier, Loading Ramp, 600 lb Cap

#8

8. Black Widow Aluminum Carrier

• Load Capacity: 400 lb
• Material: Aluminum

Best for: Compact single-bike hitch hauling.

Why it ranks #8: The 400-pound aluminum carrier fits Class III or IV 2-inch receivers and includes a loading ramp and anti-tilt device.

A roll-on ramp that stores flat against the carrier makes this Black Widow easier to keep compact between trips, while letting you load from either side. Its 400-pound capacity suits a single motorcycle, e-bike, or fat-tire bike, provided your truck has a Class III or IV 2-inch receiver.

The aluminum frame keeps the carrier material distinct from heavier steel options, and the included ramp handles the transition from ground to platform without requiring a separate loading ramp. Because that ramp installs on either side and secures flat when unused, you can choose a loading direction and reduce storage bulk afterward. An included anti-rattle device minimizes movement during transport. The 400-pound limit is the key selection boundary; the carrier uses a 2-inch hitch receiver.

Skip it if you need more than 400 pounds of capacity; the VEVOR TD-1004-03 supports up to 600 pounds.

Choose this for a single motorcycle, e-bike, or fat-tire bike when compact ramp storage and side-selectable loading matter. It is limited to 400 pounds and requires a Class III or IV 2-inch receiver.

Listed on Amazon as: Black Widow Aluminum Motorcycle Hitch Carrier with Ramp for eBike, 400 lb

#9

9. ECOTRIC 500 LB Carrier

• Load Capacity: 500 lb
• Material: Steel
• dimensions: 75.91 x 32.24 x 9.06 in

Best for: Broad receiver-class compatibility.

Why it ranks #9: Its steel frame is rated for 500 pounds and fits 2-inch receivers across several hitch classes, with loading possible from either side.

Compatibility with 2-inch square Class II, III, IV, or V receivers is the ECOTRIC AI-318’s clearest advantage, expanding the hitch classes it can serve. Its 500-pound capacity and included ramp support motorcycle hauling, with loading possible from either side of the steel frame.

The wide hitch-class compatibility can help truck owners use an existing 2-inch square receiver across Class II through V, rather than limiting the listed fit to a narrower set of classes. A 500-pound capacity sets the load boundary, while the included ramp and two-sided loading options offer flexibility when positioning the bike beside the vehicle. The steel frame is described as resisting flaking, scratching, fading, and wear, supporting use outdoors over time.

Skip it if you need a 600-pound rating; the ECOTRIC ET-008A+ET-008B is listed with that capacity.

Consider this for a truck with a compatible 2-inch square receiver when side-selectable loading and broad hitch-class compatibility are useful. Its 500-pound capacity remains the limit for the bike and any carried equipment.

Listed on Amazon as: ECOTRIC 500LB Hitch Mount Motorcycle Carrier Transportation Racks Hitch

#10

10. LMRSTOO Pickup Bed Tie-Down Rack

• Load Capacity: 6E+2 lb
• Material: Alloy Steel
• dimensions: 86.7 x 3 x 0.04 in
• Weight: 15.8 lb

Best for: Full-size pickup bed tie-down.

Why it ranks #10: This adjustable rack is made for full-size pickup beds and holds up to two motorcycles, but it is not a hitch-mounted carrier.

Adjustable width from 54 to 86.7 inches lets this LMRSTOO rack span different positions across full-size pickup beds, and it can secure up to two motorcycles. Unlike the hitch carriers in this roundup, this is a pickup tie-down rack, with a listed 600-pound capacity and alloy-steel construction.

The adjustable width is useful for setting the rack across the pickup bed, while the stated two-motorcycle capacity allows a paired transport setup. Its expansion screws use M8 rivet nuts that place the nut on the truck wall, addressing access to the narrow space between the cab and pickup bed when tightening. The listed load capacity is 600 pounds and the material is alloy steel. It is specified for trucks and trailers rather than as a hitch-mounted carrier.

Skip it if you need to load from a hitch receiver; the Mockins MA-HM-DBC-83-TILT-96 is a hitch carrier for trucks.

This suits full-size pickup owners who want adjustable bed width and capacity for two motorcycles without choosing a hitch-mounted platform. Its pickup-bed installation style is the key boundary; it is not a receiver rack.

Listed on Amazon as: Adjustable Motorcycle Tie-Down Rack forFull Size Pickups,Adjustable Width from 54" to 86.7",Suitable for 2 Motorcycles.