Best Outboard Motor Bracket For Caravan: 8 Options Compared

#1 · Best Overall

1. Marinetech Panther 550407AL

• Material Type: Aluminum
• Weight: 8.98 kg
• Material: Aluminum

Best for: Manual adjustment up to 15 HP.

Why it ranks #1: Supports 2- and 4-stroke motors up to 15 HP or 132 pounds, with anodized aluminum, torsion springs, 10 inches of travel and five positions.

Ten inches of hand-adjustable travel gives the Marinetech Panther 550407AL room to set a compatible outboard across five vertical running positions. Its hard-coat anodized aluminum frame is specified for 2- and 4-stroke motors up to 15 HP or 132 pounds, while stainless steel torsion springs counterbalance motor weight during adjustment.

A hand-operated knob changes the bracket position without a powered adjustment system, and five running positions offer options for differing boat or water conditions. The 10-inch travel range is useful when the motor’s operating height needs adjustment within that span. Hard-coat anodized aluminum and stainless steel torsion springs pair corrosion-resistant construction with weight counterbalance. Its stated capacity is 15 HP or 132 pounds, so both limits matter when matching an outboard.

Skip it if you need a bracket rated above 15 HP; the Marinebaby CZX7953AA lists support for 2-stroke motors up to 20 HP.

Consider it for an owner with a 2- or 4-stroke outboard within the 15 HP and 132-pound limits who wants manual height changes. Its five positions and 10-inch travel are the relevant adjustment boundaries.

Listed on Amazon as: Marinetech Panther 550407AL Aluminum 4-Stroke Motor Bracket – 15 HP

#2 · Extended Travel

2. Marinetech Panther 550416

• Material Type: Plastic
• Material: Plastic

Best for: Long-travel four-stroke adjustment.

Why it ranks #2: Its title specifies 16 inches of vertical travel, while the description supports long- or short-shaft 4-strokes and describes five running positions.

Sixteen inches of vertical travel is the defining feature of this Marinetech Panther auxiliary bracket, giving owners an extended adjustment range for a trolling or auxiliary motor. Its anodized aluminum construction is specified to handle the increased weight and torque of modern four-strokes, including long- or short-shaft motors, with hand adjustment by knob.

The extended 16-inch travel gives more height-adjustment range than a short-travel bracket, while multiple vertical running positions let the operator adapt to changing water or load conditions. A hand-turn knob and stainless steel torsion springs make repositioning manual and counterbalance motor weight. Anodized aluminum is specified for four-stroke weight and torque, including long and short shafts. The supplied information differs on the position count: the title says four, while the descriptions say five.

Skip it if you need a clearly specified running-position count; the Marinetech Panther 55-0410 lists five positions consistently in its supplied details.

A candidate for a four-stroke auxiliary-motor owner who needs substantial vertical adjustment and values knob operation with spring counterbalance. Verify the position-count discrepancy against the product documentation before relying on a specific number.

Listed on Amazon as: Marinetech Panther ATV Panther 550416 Auxiliary Outboard 4-Stroke Motor Bracket – 16" Vertical Travel

#3 · Saltwater Option

3. Panther 55-0410

• Material Type: Aluminum
• Weight: 19 lb
• Material: Aluminum

Best for: Four-stroke saltwater adjustment.

Why it ranks #3: This anodized aluminum 4-stroke bracket is listed for saltwater use and provides five vertical running positions with hand adjustment.

Five vertical running positions let the Panther 55-0410 adjust a trolling or auxiliary four-stroke motor for changing water or load conditions. Its anodized aluminum bracket is specified to handle modern four-stroke weight and torque, including long- and short-shaft motors, with manual knob adjustment and stainless steel torsion springs.

The five-position arrangement provides choices for setting motor height as water or load conditions change, while the hand-turn knob keeps adjustment manual. Stainless steel torsion springs counterbalance motor weight during repositioning. Anodized aluminum is specified for four-stroke weight and torque, and the wide, two-inch-thick mounting board gives a substantial mounting surface. The listing recommends the bracket for saltwater use and identifies compatibility with both long- and short-shaft motors.

Skip it if you need a stated horsepower and weight limit before selecting a bracket; the Marinetech Panther 550407AL lists limits of 15 HP and 132 pounds.

A candidate for a saltwater user seeking manual, multi-position adjustment for a four-stroke auxiliary motor. The supplied details support long- and short-shaft fit, but do not state a horsepower or weight capacity.

Listed on Amazon as: Panther 55-0410 Auxiliary Outboard 4-Stroke Motor Bracket – 10"

#4 · Broad 2-Stroke Range

4. YaeMarine 7953A

• Material: Aluminum, Stainless Steel

Best for: Wide-track 2-stroke support.

Why it ranks #4: Fits 2-stroke motors from 7.5 to 20 HP up to 115 pounds, with a 340 mm lift range and five spring-loaded positions.

A 340mm lift range and five spring-loaded vertical positions give the YaeMarine 7953A a broad adjustment range for a compatible 2-stroke auxiliary motor. Its reinforced welded aluminum frame, stainless steel components, and wide-track body pair a stated 115-pound capacity with a 260-by-205mm mounting board.

The five-position adjustment and 340mm lift range let owners select among several motor heights, while the spring-loaded mechanism supports assisted repositioning. The wide-track body is described as adding stability, and the solid polypropylene board gives the motor a defined mounting surface. Compatibility is limited to 2-stroke motors from 7.5 to 20 HP and up to 115 pounds. The boat mounting area is 135 by 230mm, with 8mm mounting holes.

Skip it if you need documented four-stroke compatibility; the Marinetech Panther 550407AL lists support for both 2- and 4-stroke motors.

A useful option for a small or medium powerboat or sailboat with a 2-stroke auxiliary motor inside the stated limits. Compare its 135-by-230mm boat mounting area and 8mm holes with the transom.

Listed on Amazon as: YaeMarine 7.5hp-20hp Heavy Duty Aluminium Marine Outboard Auxiliary Boat Motor Bracket(7953A)

#5

5. Marinebaby Aluminum Bracket

• Material Type: Aluminum
• Weight: 4.94 kg
• Material: Aluminum

Best for: 2-stroke motor height adjuster.

Why it ranks #5: Supports 2-stroke motors from 7.5 to 20 HP and offers five locking heights from 195 to 320 mm; mounting hardware is not included.

Five locking height positions, adjustable from 195mm to 320mm, let this Marinebaby bracket place a compatible 2-stroke outboard at different running heights. Its aluminum frame and stainless steel counterbalance springs support motors from 7.5 to 20 HP, while a solid polypropylene board provides the mounting surface for the motor.

The five-position lock gives owners a defined range for setting motor height, while the stainless steel springs counterbalance motor weight during adjustment. The 8-by-10.2-inch board and 5.2-by-9-inch mounting size help establish whether its footprint suits the boat’s transom layout. Aluminum construction is described as corrosion-resistant, and the supplied facts report salt-spray testing across the maker’s products. Mounting hardware is not included, and the bracket requires 8mm screws.

Skip it if you need included mounting hardware; this package contains only the bracket, while Haida’s supplied details specify a mounting footprint and two running positions.

A practical match for a small-boat owner mounting a compatible 2-stroke auxiliary motor who values adjustable height and spring assistance. Check the transom footprint and arrange 8mm mounting screws separately before installation.

Listed on Amazon as: Boat Outboard Motor Bracket, Aluminum Boat Engine Support 20 HP

#6

6. Mojiate M5379AA

• Material Type: Aluminum
• Weight: 11 lb
• Material: Aluminum

Best for: 2-stroke support up to 20 HP.

Why it ranks #6: A reinforced welded aluminum bracket for 2-strokes from 7.5 to 20 HP, with a stated maximum motor weight of 115 pounds; not for 4-strokes.

A reinforced welded aluminum frame and stainless steel springs give the Mojiate bracket structural support and assistance when lifting a compatible 2-stroke outboard. It is specified for motors from 7.5 to 20 HP, with a maximum weight of 115 pounds, and uses a solid plastic mounting board for the motor attachment surface.

The stated 2-stroke-only compatibility is important when matching an engine; the listing expressly does not recommend this bracket for four-strokes. Its 20 HP and 115-pound limits provide two separate capacity checks. A reinforced welded aluminum frame and heavy-duty stainless steel springs support the motor and help balance its weight during lifting, while the solid plastic mounting board supplies the motor mounting surface. The product is positioned for small- to medium-sized powerboats and yachts.

Skip it if you have a four-stroke outboard; the Marinetech Panther 550407AL explicitly supports both 2- and 4-stroke motors within its capacity.

This suits owners of small or medium powerboats and yachts with a 2-stroke motor within both stated capacity limits. Its explicit four-stroke restriction is the key fit boundary to check before choosing it.

Listed on Amazon as: 2 Stroke Marine Outboard Motor Support, 7.5HP-20HP Outboard Motor Bracket for Boat, Heavy Duty Aluminum Boat Engine Motor Kicker with Plastic Mounting Plate, Max Load 20HP

#7

7. Haida 20 HP Bracket

• Material Type: Plastic, Stainless Steel
• Weight: 4.06 kg
• Material: Plastic, Stainless Steel

Best for: Two-position 2-stroke bracket.

Why it ranks #7: Designed for most 2-stroke motors up to 20 HP, it has two vertical running positions and a plastic base; detailed adjustment range is not listed.

Two vertical running positions let the Haida bracket lock a compatible outboard either up or down, making its adjustment approach straightforward for auxiliary use. The listing specifies motors up to 20 HP and describes compatibility with most styles of 2-stroke outboards, using a stainless steel construction and plastic base.

The two running positions provide a simple choice between raised and lowered motor placement, rather than a finely graduated height range. Its stated 20 HP capacity and 2-stroke compatibility help define the engine match, while the stainless steel material and plastic base identify the principal construction materials. The 8-by-85⁄8-inch mounting size and 81⁄4-by-103⁄8-inch overall board size offer concrete dimensions to compare with the boat’s available mounting area.

Skip it if you want five height settings; the YaeMarine 7953A lists a spring-loaded bracket with five vertical positions and a 340mm lift range.

A fit for a 2-stroke owner seeking a simple raised-or-lowered auxiliary motor position on a sailboat or powerboat. Its two-position adjustment and listed mounting footprint are the main boundaries to assess.

Listed on Amazon as: 2 Stroke Outboard Motor Bracket Kicker for Boat up to 20HP, Auxiliary Heavy Duty Marine Motor Bracket Max Load 20HP

#8

8. Marinetech Panther 550021

• Material Type: Plastic
• Material: Plastic

Best for: Freshwater 2-stroke sailboats.

Why it ranks #8: Its 20 HP or 115-pound capacity is limited by explicit fresh-water use and a warning not to use it with 4-stroke engines; safety cable is not included.

An 11-inch travel range with five stops lets the Marinetech Panther 550021 set an auxiliary motor at multiple heights on a freshwater powerboat or sailboat. The spring-loaded aluminum bracket is specified for motors up to 20 HP or 115 pounds, but the listing expressly excludes four-stroke engines.

Five stops across 11 inches of travel offer a defined adjustment range for setting motor height, and spring loading supports the bracket’s raising and lowering workflow. The listing identifies manual operation, so no power is needed for those adjustments. Its freshwater-use specification and 20 HP or 115-pound maximum narrow the fit, while a Panther safety cable is required but not included. The stated prohibition on four-stroke use is an essential compatibility limit.

Skip it if you need a bracket that supports four-stroke engines; the Marinetech Panther 55-0410 is specified for four-stroke auxiliary motors.

Best considered by a freshwater sailboat or powerboat owner with a compatible non-four-stroke motor and the required safety cable. The 20 HP, 115-pound, and freshwater limits define its fit.

Listed on Amazon as: Marinetech Panther 550021 Outboard Aluminum Motor Bracket