Best Power Tilt For Outboard Motor: Compare 10 Replacements

#1 · Best Overall

1. Winibo Tilt & Trim Assembly

• Weight: 11.2 lb
• Material: Alloy Steel, Aluminum

Best for: Mercury four-stroke assembly.

Why it ranks #1: A complete assembly is listed for Mercury F35–F60 four-strokes, names multiple replacement numbers, and specifies alloy steel and aluminum construction.

A complete tilt-and-trim assembly is listed for Mercury F35, F40, F50, and F60 four-stroke outboards, covering engines from 35HP through 60HP. Its stated replacement references give owners a practical way to identify a matching unit while seeking powered engine-angle adjustment.

The assembly is specified for Mercury F35–F60 four-stroke models, and its replacement references include 8M0055011, 893517T01, and 855654T09. That combination helps owners compare both engine series and existing part references before installation. The listing describes precise tilt adjustment and says it can minimize turbulence and vibration while supporting vessel stability and propeller efficiency. Alloy steel and aluminum construction are specified, with corrosion resistance also stated in the product features.

Skip it if you need Yamaha 50–90HP motor-only replacement; VRIWOY 6H1-43880-02-00 is listed for that range.

Mercury four-stroke owners within the F35–F60 range can consider this complete assembly for engine-angle adjustment and replacement by listed reference. Its fit scope is specific, so verify that engine family and part number align.

Listed on Amazon as: 8M0055011 Outboard Power Tilt & Trim Assembly up to 60HP

#2 · Mercury 40–60 HP

2. RisWhiteMeteors Trim Assembly

• Operation Mode: Electric

Best for: Mercury 40–60HP replacement.

Why it ranks #2: This complete electric-hydraulic assembly is specified for Mariner and Mercury 40–60 HP and replaces three listed OE numbers.

The electrically hydraulic assembly combines powered lifting with stated compatibility for Mariner and Mercury 40–60HP outboards, enabling engine-angle adjustment without manual tilting. Its direct-replacement positioning and listed OE references make it a targeted option for owners replacing a corresponding trim-and-tilt assembly rather than shopping for a universal unit.

Electric operation and hydraulic lifting work together to raise and adjust the engine, while the listing describes smooth lifting and stable operation. The stated 40–60HP Mariner and Mercury fit range narrows the intended application, and OE references 830150T10, 8M0055006, and 8M0055011 help identify the replacement. A marine-grade, corrosion-resistant structure is specified for marine use. The package lists one assembly, so this is a complete-unit replacement listing, not a multi-piece assortment.

Skip it if you need a listed fit for a larger Yamaha; VRIWOY 6H1-43880-02-00 covers Yamaha 50–90HP engines.

Mercury or Mariner owners replacing a matching 40–60HP trim-and-tilt assembly get a specified electric-hydraulic unit and OE references for identification. Its application is narrower than a general-purpose choice, so engine fit remains the key boundary.

Listed on Amazon as: 8M0055011 830150T10 8M0055006 Electrically Hydraulic Power Trim &Tilt Compatible with Mariner Mercury Outboard 40-60HP

#3 · 75–115 HP Assembly

3. HOLDWELL Tilt & Trim Assembly

• Material: Most likely Aluminum Alloy or Stainless Steel
• Operation Mode: Electric

Best for: Mercury 75–115HP complete assembly.

Why it ranks #3: The complete two-wire assembly is listed for Mercury F-75 through F-115, with two specified part numbers and a serial-number fitment reminder.

This two-wire power tilt-and-trim assembly is listed for Mercury F-75 through F-115 engines, offering a complete-unit option for that application range. Its specific part references help identify the intended replacement, while the seller notes that top shaft attachment details can vary between batches without affecting function.

The assembly is identified by references 8M0090335 and 8M0171818 and is listed for Mercury F-75, F-80, F-90, F-100, and F-115 engines. That range gives buyers named models to compare before selecting a complete tilt-and-trim unit. The two-wire electric configuration describes its connection style. The listing advises checking the outboard serial number, and it notes slight top-shaft attachment differences between batches while stating that function is unchanged. That detail matters when preparing for installation.

Skip it if you need a Yamaha 50–90HP two-wire motor; VRIWOY 6H1-43880-02-00 is listed for Yamaha engines.

Mercury F-75 through F-115 owners seeking a complete electric tilt-and-trim assembly can use the listed references and model range as a starting point. Account for the noted top-shaft attachment variation when planning installation.

Listed on Amazon as: HOLDWELL 2 Wire Outboard Power Tilt & Trim Assembly 8M0090335 8M0171818

#4 · Includes Wiring Kit

4. Bzcovac PT-35 Tilt & Trim

• Weight: 19.5 lb
• Material: Aluminum

Best for: Small outboards needing setback.

Why it ranks #4: This complete electric-hydraulic unit suits engines up to 35 HP and includes a wiring kit; its listed 5.5-inch setback is a distinguishing fit detail.

A 51⁄2-inch setback distinguishes this PT-35 tilt-and-trim unit, which is specified for outboards up to 35HP. The setback is described as helping boat stability and propeller bite at a higher setting, while switch-activated raising can reduce manual effort and help protect the prop in shallow water.

The PT-35 includes a 51⁄2-inch setback, a feature linked in the listing to improved stability and a better propeller bite at a higher prop setting. A simple switch raises the motor, helping reduce manual tilting effort and protecting the prop from potential shallow-water or debris damage. The package includes the tilt-and-trim unit and a wiring kit, supporting installation as a system rather than a motor-only swap. Its stated capacity is up to 35HP, which defines its application boundary.

Skip it if you need a Yamaha 50–90HP motor replacement; VRIWOY 6H1-43880-02-00 is specified for that range.

Owners of outboards up to 35HP who want setback and switch-activated engine raising may value the included wiring kit and reduced manual tilting. The 35HP ceiling makes engine capacity the decisive fit boundary.

Listed on Amazon as: 3002.1017 52100 for CMC PT-35 Tilt and Trim up to 35 HP – Outboard Motor Electric Hydraulic Power Trim & Tilt Unit

#5 · Broad Yamaha Range

5. VRIWOY Yamaha Tilt Motor

• Weight: 3.03 lb

Best for: Yamaha 50–90HP motor replacement.

Why it ranks #5: The 12-volt, two-wire motor is listed for Yamaha 50–90 HP two- and four-stroke engines and replaces three part-number versions.

A 12-volt, two-wire motor with a three-bolt mount targets Yamaha 50–90HP outboards, including two-stroke and four-stroke engines. That electrical and mounting specification gives a repair-minded buyer concrete details to compare against an existing tilt-and-trim motor before choosing this replacement.

The 12V two-wire configuration and three-bolt mounting arrangement help frame the electrical and installation match, while ring terminals are included for connection. Stated compatibility spans Yamaha 50–90HP two-stroke and four-stroke units, and the listed replacement references are 6H1-43880-00 and 6H1-43880-01. Marine-grade construction is described for harsh, including saltwater, conditions. The product is a motor replacement, so buyers seeking a complete trim-and-tilt assembly should distinguish that scope before ordering.

Skip it if you need the full assembly for a Mercury F-75 to F-115; HOLDWELL 8M0090335 is listed for those engines.

Yamaha owners matching the 50–90HP application and existing 12V, two-wire, three-bolt setup have useful fit details to check. It suits motor replacement work, not buyers seeking a complete hydraulic assembly in one purchase.

Listed on Amazon as: Power Tilt & Trim Motor 6H1-43880-02-00 for Yamaha 50 60 70 80 90 HP

#6

6. Misakomo 68V Tilt Motor

• Weight: 3 lb
• Operation Mode: Electric

Best for: Yamaha 115–200HP motor replacement.

Why it ranks #6: This Yamaha replacement motor covers listed 115, 150, and 200 HP applications and includes several OEM numbers, but it is a motor rather than a complete assembly.

A Yamaha application spanning 115, 150, and 200HP models makes this electric tilt-trim motor a targeted replacement choice across several listed engine sizes. Its powered raising and lowering support engine-angle adjustment, with engine lifting also described as useful when loading a boat onto a trailer.

The product is identified as an electric motor, and its listed Yamaha applications include 115, 150, and 200HP engines. A substantial set of OE references, including 68V-43880-00-00 and multiple 64E and 67H numbers, gives buyers details to compare with an existing part. Powered raising and lowering enable trim adjustment, while the stated ability to lift the engine supports trailer loading. The listing also names Mercury 8M6007575 as a replacement reference, but fit still depends on the exact application.

Skip it if you need a complete Mercury F-75 to F-115 assembly; HOLDWELL 8M0090335 is listed as a full unit.

Yamaha owners within the listed 115–200HP applications seeking motor-only replacement can use the model and OE references to narrow the match. Buyers needing the entire tilt-and-trim assembly should look for a complete-unit listing instead.

Listed on Amazon as: 68V-43880-00 Outboard Motor Power Tilt Trim Fit for Yamaha 115 150 200HP

#7

7. SouthMarine 68V Tilt Motor

• Weight: 1.31 kg
• Material: Aluminum
• Operation Mode: Electric

Best for: Yamaha 115–225HP motor replacement.

Why it ranks #7: The listing targets Yamaha 115–225 HP applications and names multiple replacement numbers; confirm voltage and exact model because its specification says 68 volts.

A broad 115–225HP application, with specific Yamaha F115 and F150 references, positions this electric tilt-trim motor for owners comparing replacement parts across several outboard sizes. Its aluminum construction and listed OEM numbers provide concrete details for identifying a potential motor replacement.

The listing covers Yamaha outboards from 115HP to 225HP and names F115 and F150 among its engine references. A range of replacement numbers—including 64E, 67H, and 68V series references—helps buyers compare an existing motor with the product listing. Aluminum construction is specified, and electric operation identifies the motor’s role in powered tilt and trim. The listed weight is 1.31 kg. This is a motor listing, so it does not claim to include the complete hydraulic assembly.

Skip it if you need a complete Yamaha 115–200HP trim assembly; Misakomo A3607 is also a motor, so seek a full-unit listing.

Yamaha owners seeking a motor replacement within the stated 115–225HP range can use the named engine and OEM references to assess fit. Those needing a complete assembly should treat this listing’s motor-only scope as a boundary.

Listed on Amazon as: Boat Engine 68V-43880-00 01 03 04 Tilt Trim Motor for Yamaha 115-225HP

#8

8. Misakomo 69J Tilt Motor

• Weight: 4.6 lb
• Operation Mode: Electric

Best for: Yamaha 200–300HP motor replacement.

Why it ranks #8: This motor lists Yamaha 200–300 HP fitment and compatible Mercury cross-reference numbers, making it a higher-horsepower motor-only option.

Compatibility spanning Yamaha 200–300HP models and several F, LF, LZ, and Z series gives this electric tilt-trim motor a broad stated application. Powered angle adjustment enables engine positioning on the water, while the listing also describes lifting the engine for trailer loading.

The listed Yamaha applications include F200, F225, F250, LF200, LF225, LF250, LZ250, LZ300, Z250, and Z300, giving owners specific model names to compare. OE references cover Yamaha numbers as well as Mercury 888645T1 and 888645T02. Electric operation supports smooth engine-angle adjustment, and the stated trailer-loading lift can help keep the engine raised during loading. At 4.6 pounds, the listed weight is useful when planning a motor replacement, but the product is not presented as a complete assembly.

Skip it if you need a full Mercury 75–115HP assembly; HOLDWELL 8M0090335 is listed as a complete unit for that range.

Owners of the listed Yamaha 200–300HP models needing a motor for powered tilt adjustment may find the broad model and OE references useful. Keep in mind this is a motor replacement, not a complete trim assembly.

Listed on Amazon as: 69J-43880-01-00 69J-43880-00-00 Power Tilt Trim Motor for Yamaha 250HP

#9

9. Caltric Mercury Tilt Motor

• Weight: 4.8 lb
• Material: Metal

Best for: Mercury and Force motor with reservoir.

Why it ranks #9: The motor and reservoir cover a wide Mercury, Mariner, and Force range, but the listing focuses on 1- or 2-ram systems from specified applications.

A power tilt-trim motor and reservoir are both included, giving this Caltric listing a defined replacement scope for compatible Mercury, Mariner, and Force applications. Its stated coverage includes multiple horsepower ranges and model years, helping owners compare the assembly against an older outboard’s fit requirements.

The included motor and reservoir make this listing more than a motor-only replacement, a useful distinction when planning a repair. Compatibility information names Mercury and Force applications across several ranges, with specific engine-year groupings such as Mercury 100HP and 115HP models from 1992–2006. The listing also identifies 1-ram systems and replacement reference 809885A1. Its 12V specification is provided. Because the fit list spans numerous models, matching the exact engine application remains essential.

Skip it if you need Yamaha F200–F250 motor fitment; Caltric’s Yamaha F200/F225/F250 listing B0BD5YSGXN targets those models.

Owners of listed Mercury, Mariner, or Force engines seeking a motor-and-reservoir replacement may appreciate the defined package and 12V specification. The broad, model-specific fit list means this is not a universal outboard replacement.

Listed on Amazon as: Caltric Tilt Trim Motor Compatible with Mercury 50-125 Hp 1992-2006 2-Wire New 809885A1 / ARCO 6276

#10

10. Caltric Yamaha Tilt Motor

• Weight: 4.3 lb
• Material: Metal

Best for: Yamaha F200–F250 motor replacement.

Why it ranks #10: This 12-volt motor lists Yamaha F200, F225, F250, and related models, but provides less fitment detail and is not a complete power tilt assembly.

Compatibility with Yamaha F200, F225, F250, LF200, LF225, LF250, and LZ250 models gives this Caltric motor a focused high-horsepower application. The listing identifies it as a power tilt-trim motor, enabling owners of those engines to consider a targeted replacement rather than a complete assembly.

The named Yamaha models—F200, F225, F250, LF200, LF225, LF250, and LZ250—make the intended application more specific than a broad horsepower-only range. Listed replacement references include 60V-43880-00-00 and 69J-43880-00-00. The product is a 12V metal motor, with compact listed dimensions of 3.7 by 5 inches and a weight of 4.3 pounds. Those details can help with part comparison and handling, but the listing does not describe a complete trim-and-tilt assembly.

Skip it if you need a Mercury 75–115HP complete unit; HOLDWELL 8M0090335 is listed as a full assembly for those models.

Owners of the listed Yamaha F, LF, or LZ models seeking a 12V motor replacement can use the application and reference details to compare parts. Buyers requiring the complete hydraulic trim-and-tilt assembly need a different product scope.

Listed on Amazon as: Caltric Power Tilt Trim Motor Compatible with Yamaha F200 F225 F250 LF200 LF225 LF250 LZ250 2002 2003 2004-2009