Best Power Tongue Jack For Travel Trailer: 10 Options Compared

#1 · Best Overall

1. Kohree 7500lbs Jack

• Load Capacity: 7500 lb
• Material Type: Alloy Steel

Best for: Level-aware heavy trailers.

Why it ranks #1: Its listed 7,500-pound capacity, dual-wire connection, built-in level, cover, crank handle, and mounting bolts make it a well-equipped travel-trailer choice.

A built-in level is the Kohree jack’s clearest differentiator, giving travel-trailer owners a leveling reference alongside its 7,500-pound lifting capacity. Button operation and a dual-wire direct connection are also specified, combining powered raising and lowering with a stated wiring approach for installation.

The 7,500-pound capacity makes this a high-capacity option among the listed jacks, while the built-in level gives owners a reference when positioning a trailer. Press-button controls support powered raising and lowering, and the dual-wire direct connection is described as enabling fast installation. Alloy-steel construction and an included jack cover address the hardware and covering needs; the package also lists a manual crank and three mounting bolts for installation or manual operation.

Skip it if you need a stated operating-height range before choosing; the VEVOR EJ3550B lists 9.84 to 33.85 inches.

This Kohree fits buyers prioritizing a built-in leveling reference and a 7,500-pound rating for a travel trailer or camper. Its dual-wire connection and included mounting bolts matter during installation; check that the jack’s available height suits your setup.

Listed on Amazon as: Kohree 7500lbs Electric Trailer Jack with Dual Wire, Built-in Level

#2 · Best 5000-Pound Option

2. POLESTAR 5000lb Jack

• Dimensions: 7.28 x 9.84 x 32.28 in
• Weight: 21.7 lb
• Load Capacity: 5000 lb
• Material Type: Alloy Steel

Best for: Higher-capacity trailer setups.

Why it ranks #2: The 5,000-pound dynamic and 7,500-pound static figures offer clear load distinctions, and the package includes a crank and waterproof cover.

A 5,000-pound dynamic rating gives the POLESTAR 10201091 more stated lifting capacity than a 3,500-pound tongue jack, while its 7,500-pound static rating adds a separate measure for stationary support. It suits buyers who want an electric A-frame jack for heavier trailer, RV, boat, or off-road-vehicle applications.

The alloy-steel construction pairs with the stated 5,000-pound dynamic capacity, giving buyers a clear load figure to compare with their trailer requirements. A 7,500-pound static rating distinguishes its stationary support specification from its lifting rating. The included crank offers a manual operating option, and the waterproof cover gives owners a supplied cover for storage or outdoor use. At 21.7 pounds, it is a substantial component to account for during installation and handling.

Skip it if you need a stated 7,500-pound dynamic rating; the Kohree 7500lbs Electric Trailer Jack lists that capacity.

Choose this POLESTAR for an RV, trailer, boat, or off-road-vehicle setup whose requirements fit its 5,000-pound dynamic rating. Its higher static rating and included crank are useful considerations, but verify your load against the dynamic figure.

Listed on Amazon as: POLESTAR Electric Trailer Jack, 5000lbs Electric Power A-Frame Tongue Jack

#3 · Best Integrated Lighting

3. Lippert 3500lb Jack

• Dimensions: 32.75 x 12.5 x 7.25 in
• Weight: 28.6 lb
• Load Capacity: 3500 lb
• Material Type: Alloy Steel

Best for: Quiet electric hitching.

Why it ranks #3: Its 3,500-pound capacity suits lighter loads, while the description lists integrated LED lights and helical-cut gears; the package includes mounting pins and a foot pad.

Helical-cut gears give Lippert’s 3,500-pound electric tongue jack a specifically stated quiet, efficient operating mechanism, enabling powered raising and lowering without relying on a hand crank for routine hitching. Four integrated LED lights add illumination to the jack area, a practical feature for low-light setup.

The 3,500-pound lift capacity sets the load boundary for choosing this jack, while the helical-cut gears are described as quiet and efficient for powered operation. Four integrated LED lights can illuminate the work area around the tongue during setup. Lippert also describes installation as easy, and the package lists a clevis pin, foot pad, hairpin cotter pin, hand crank, and jack body, supplying key mounting and manual-use components.

Skip it if you need a load rating above 3,500 pounds; the VEVOR EJ3550B lists a 4,000-pound capacity.

This Lippert suits trailer owners seeking powered hitching, quieter stated gear operation, and integrated lighting. Keep its 3,500-pound capacity in view when matching it to a trailer, and account for the listed mounting hardware during installation.

Listed on Amazon as: Lippert 3,500 lb Electric Trailer Tongue Jack, RV Power Jack, Black 285318

#4 · Best 4000-Pound Option

4. Kohree 4000lb Jack

• Dimensions: 7.09 x 5.71 x 24.41 in
• Weight: 20.5 lb
• Load Capacity: 4000 lb
• Material Type: Heavy-duty steel with anti-rust coating

Best for: Fast button-operated lifting.

Why it ranks #4: The 4,000-pound dynamic and 6,000-pound static ratings are specified, and the kit lists a cover, manual crank, and three mounting bolts.

Kohree lists a 47-second time to lift 8 inches, compared with 84 seconds for other products, giving this 4,000-pound jack a concrete speed claim to assess. Its 12-volt motor, push-button controls, and separate 6,000-pound static rating round out the stated operating and capacity details.

The listed 47-second time for an 8-inch lift provides a specific operating benchmark, while push-button control lets owners raise or lower an A-frame trailer automatically. Its 4,000-pound dynamic capacity and 6,000-pound static lifting figure distinguish load use from stationary support. Heavy-duty steel with an anti-rust coating addresses the stated construction, and the package includes wiring, a cover, a manual crank handle, and three mounting bolts for installation and manual override.

Skip it if you need a 7,500-pound rating; the Kohree KR1217-KO-US-FBA lists that capacity and a built-in level.

This Kohree suits A-frame trailer owners who value button operation, a stated 8-inch lift time, and included wiring and mounting hardware. Match the 4,000-pound dynamic rating to your load, and consider its separate static figure for stationary support.

Listed on Amazon as: Kohree Electric Trailer Jack 4000lbs with Wiring, Heavy Duty, A-Frame

#5

5. VEVOR 5000lb Jack

• Dimensions: 9.65 x 5.51 x 28.94 in
• Weight: 22.9 lb
• Load Capacity: 5000lbs lb
• Material Type: Carbon Steel

Best for: Rust-resistant 5,000-pound lifting.

Why it ranks #5: A 5,000-pound rating and galvanized rust-resistant coating suit owners seeking a higher-capacity steel jack; it includes a manual crank and weatherproof cover.

A galvanized rust-resistant coating over carbon steel distinguishes this 5,000-pound VEVOR jack for owners considering outdoor exposure. The package also includes a manual crank handle and weatherproof cover, pairing powered tongue-jack operation with supplied options for manual use and covering when the jack is not in use.

The 5,000-pound capacity gives buyers a clear load limit to compare with their RV or trailer, while the galvanized coating is specified as rust resistant for use in various environments. A two-way connector is named in the title, providing a defined connection feature to consider in the installation workflow. The included manual crank handle offers a manual operating option, and the weatherproof cover supplies a way to cover the jack between uses.

Skip it if you need an unambiguous listed lift range; the VEVOR EJ3550B specifies 9.84 to 33.85 inches.

Choose this VEVOR if a 5,000-pound rating, galvanized coating, and supplied cover suit your RV or trailer use. Its stated height range differs between title and features, so that discrepancy is a meaningful boundary when planning installation.

Listed on Amazon as: VEVOR Electric Trailer Jack, 5000 lbs, Heavy Duty RV Electric Power Tongue Jack with 2 Way Connector, Manual Crank Handle & Weatherproof Jack Cover, 10"-28.3" Lift, for RVs, Trailers & Campers, Black

#6

6. VEVOR 4000lb Jack

• Dimensions: 33.85 in
• Weight: 9.8 kg
• Load Capacity: 4000 lb
• Material Type: Carbon Steel

Best for: Outdoor trailer lifting.

Why it ranks #6: The 4,000-pound rating, carbon-steel construction, waterproof cover, crank handle, and stated two-year manufacturer warranty make it a practical mid-capacity option.

A 4,000-pound capacity paired with a stated 9.84-to-33.85-inch range gives this VEVOR jack both a load figure and working-height span to compare against a trailer. Its carbon-steel body has a protective coating, and a waterproof sunshade cover is included for outdoor ownership.

The 4,000-pound rating helps define the trailer loads this jack is intended to lift, while the listed 9.84-to-33.85-inch range gives buyers a span to compare with their coupling and parking needs. Carbon steel with a protective coating is specified to withstand splashes and tough outdoor conditions. The included crank handle provides a manual operating option, and the waterproof cover is supplied for covering the jack when not in use.

Skip it if you need a 5,000-pound VEVOR jack; the EJ5021B lists that capacity and a galvanized rust-resistant coating.

Consider this VEVOR for an RV, horse, utility, or yacht trailer whose load and required jack height fit its stated range. The coated carbon steel and supplied cover suit outdoor use, while the 4,000-pound rating remains the key boundary.

Listed on Amazon as: VEVOR Electric Trailer Jack, Power Tongue Jack Weight Capacity 4000 lbs, 9.84"-33.85" Electric Tongue Jack with Waterproof Cover for Lifting RV Trailer, Horse Trailer, Utility Trailer, Yacht Trailer

#7 · Highest Listed Capacity

7. KYX 7500lb Jack

• Load Capacity: 7500 LB
• Material Type: Carbon Steel

Best for: High-capacity A-frame lifting.

Why it ranks #7: Its stated 7,500-pound capacity is among the group’s highest, with a 12V DC motor and carbon steel with anti-rust coating; included components are unspecified.

A 7,500-pound rating and 12-volt DC motor make the KYX an option for A-frame trailer owners seeking powered raising and lowering at a high stated capacity. Its carbon-steel construction has an anti-rust surface coating, with a waterproof cover also named in the product title.

The 12-volt DC motor is specified to raise or lower an A-frame trailer, while the 7,500-pound rating establishes the capacity to compare against the intended load. Carbon steel with an anti-rust coating is described as resisting harsh outdoor conditions and water splashes. A waterproof cover is identified in the title as an included accessory. The supplied details do not state a lift range, so buyers must weigh capacity and construction without a listed height span.

Skip it if you need a stated lift range to plan height; the RVMATE RMETJ lists a 9-inch retracted height and 323⁄5-inch maximum.

Consider this KYX for an A-frame trailer whose load fits the 7,500-pound rating and whose owner values coated carbon steel. The supplied details identify motor and cover features but no height range, an important installation consideration.

Listed on Amazon as: KYX Electric Trailer Jack 7500LBs,Electric Jack with Waterproof Cover

#8

8. POLESTAR 3500lb Jack

• Dimensions: 3.94 x 3.94 x 19.69 in
• Weight: 22 lb
• Load Capacity: 3500 lb
• Material Type: Alloy Steel

Best for: Mid-capacity A-frame trailers.

Why it ranks #8: This 3,500-pound model lists a 5,000-pound static lifting figure and includes a crank and waterproof cover, but offers less rated capacity than higher-ranked choices.

A 3,500-pound dynamic rating with 5,000 pounds of stated static lifting power gives the POLESTAR 10201089 two distinct capacity figures for trailer owners to evaluate. Its 12-volt motor-driven operation is described as easing travel-trailer and boat-trailer coupling and uncoupling from the hitch.

The 3,500-pound dynamic capacity is the key figure for matching this jack to a trailer, while the separate 5,000-pound static rating describes its stated stationary lifting power. A 12-volt motor drives electric operation for coupling and uncoupling, reducing reliance on the included crank during routine hitching. The alloy-steel body comes with a waterproof cover, and the listing also advises checking for damaged or worn parts before use.

Skip it if you need a 4,000-pound dynamic rating; the Kohree HY1711-KO-US-FBA-2 lists that capacity.

This POLESTAR suits travel-trailer or boat-trailer owners seeking motorized hitching within its 3,500-pound dynamic rating. The separate static figure, included crank, and waterproof cover add useful context, but match your load to the dynamic capacity.

Listed on Amazon as: POLESTAR Electric Trailer Jack, 3500lbs Electric Power A-Frame Tongue Jack

#9

9. RVMATE A-Frame Jack

• Weight: 10.52 kg
• Load Capacity: 3500-4000 lb
• Material Type: Alloy Steel

Best for: Low-light height adjustment.

Why it ranks #9: Its stated 3,500–4,000-pound capacity, 32-3/5-inch maximum extended height, adjustable footplate holes, and LED light provide useful setup details.

An integrated LED light and four footplate-bracket adjustment holes give the RVMATE jack useful setup details beyond its 3,500-to-4,000-pound capacity. The light is identified for nighttime operation, while the locking-pin positions let owners adjust footplate height to suit their trailer setup.

The stated 9-inch fully retracted height and 323⁄5-inch maximum extended height give buyers a concrete span to compare with their trailer. Four holes in the footplate bracket allow height adjustment using a locking pin, while star washers are intended to penetrate the mounting-plate paint for metal-to-metal grounding. Button controls power lifting and lowering, and the LED light supports nighttime operation. Its listed capacity spans 3,500 to 4,000 pounds.

Skip it if you need one stated 5,000-pound rating; the POLESTAR 10201091 lists a 5,000-pound dynamic capacity.

This RVMATE suits trailer owners who value nighttime illumination and adjustable footplate height, with a listed capacity range of 3,500 to 4,000 pounds. Compare its stated extension and mounting details with the height and grounding needs of your setup.

Listed on Amazon as: RVMATE Electric A-Frame Trailer Jack up to 3500-4000lbs

#10

10. Pafessa 3500lb Jack

• Dimensions: 30.7 x 8.68 x 7.67 in
• Weight: 8 kg
• Load Capacity: 3500 lb
• Material Type: Alloy Steel

Best for: Extended reach with drop foot.

Why it ranks #10: The 3,500-pound rating, 18 inches of travel, extra footpad extension, weather-resistant cover, and mounting hardware are useful, but the listing is less complete on warranty and dimensions.

Eighteen inches of travel plus a 4.5-inch drop-foot extension give the Pafessa jack a stated 22.5 inches of combined reach to consider for A-frame trailers. Its 3,500-pound capacity, 6-inch adjustable footpad, and 7-foot direct-grounding power cord further define the installation and lifting setup.

The 18-inch travel and additional 4.5-inch footpad extension provide a combined stated reach of 22.5 inches, helping buyers assess whether the jack can reach their needed position. The 6-inch adjustable footpad offers a specified contact dimension, while the 7-foot cord is intended for direct grounding; wire terminals are not included. The 3,500-pound capacity and 2.25-inch mounting-hole fit provide further checks for load and A-frame installation compatibility.

Skip it if you want a supplied manual crank handle; the POLESTAR 10201089 lists a crank among its included components.

Choose the Pafessa if its 3,500-pound capacity and extended footpad reach suit your A-frame trailer. The 7-foot direct-grounding cord and stated mounting-hole size help plan installation, but the emergency crank socket requires a separate driver handle.

Listed on Amazon as: 12V Electric Tongue Jack 3500lb A-Frame Heavy Duty Trailer Jack 18” Travel Add 4.5” with The Drop Foot & LED Light for Travel Trailer Camper,Protective Cover Included