Best Ramps For 4 Wheeler: Compare 10 Loading Ramp Sets

#1 · Best Overall

1. VENDAV 7.5 ft Aluminum Ramps

• Dimensions: 89"L x 12"W x 1.9"H
• Load Capacity: 1500 lb
• Material: Aluminum
• Weight: 34 lb

Best for: Wide-track pickup ATV loading.

Why it ranks #1: The 89-by-12-inch aluminum pair is explicitly designed for dual-track ATV loading and carries a 1,500-pound combined rating.

A 89-inch length and two-ramp setup let you position separate wheel paths for a four-wheeler when loading into a pickup or trailer. VENDAV rates the pair for 1,500 pounds, with up to 750 pounds on each ramp when weight is evenly distributed, giving ATV and UTV owners a clear capacity boundary.

Each aluminum ramp measures 89 by 12 inches and provides an approximately 11-inch wheel path between its side rails, helping accommodate equipment tires while keeping the two tracks distinct. The pair folds for portability, so storage and transport are more manageable than with a single rigid track. Welded construction and compression testing are listed as strength checks, while the 1,500-pound combined rating applies only with evenly distributed load; account for each ramp’s 750-pound limit when positioning a four-wheeler.

Skip it if you need to load equipment above the pair's 1,500-pound rating; KROAK's 1,800-pound aluminum pair offers a higher listed capacity.

For ATV or UTV owners loading into a pickup or trailer, this pair combines long aluminum tracks with a 1,500-pound rating. Check both total weight and the 750-pound per-ramp limit before loading.

Listed on Amazon as: ATV Ramps for Pickup Trucks, 7.5 ft Folding Aluminum Loading Ramps, 2 Pack

#2 · Highest Capacity

2. KROAK 7.5 ft Aluminum Ramps

• Dimensions: 90"L x 12"W x 12"H
• Load Capacity: 1800 lb
• Material: Aluminum
• Weight: 33.2 lb

Best for: High-capacity folding aluminum loading.

Why it ranks #2: Its 90-by-12-inch aluminum ramps have an 1,800-pound pair capacity and include load straps for truck or trailer loading.

A listed 1,800-pound total capacity makes KROAK’s 7.5-foot aluminum pair a high-rated option for loading ATVs, UTVs, mowers, and small tractors. Its quick-folding design reduces each ramp to 45.8 inches for storage, combining long open tracks with a more compact stored length.

Each ramp measures 90 inches long and 12 inches wide when open, providing an extended track for loading from a pickup or trailer. The stated one-second folding design reduces each ramp to 45.8 inches, which can simplify storing the pair in a garage or truck bed. Aluminum construction keeps the pair’s listed weight at 36.8 pounds, and included load straps provide a way to secure the ramps during use.

Skip it if you need a capacity above 1,800 pounds for the pair; Stalwart's 69-inch set lists a 2,200-pound combined rating.

KROAK suits buyers who need long aluminum tracks, folding storage, and a listed 1,800-pound pair capacity for a four-wheeler or mower. Keep the combined rating and stored dimensions in mind when planning use.

Listed on Amazon as: 7.5FT Aluminum Loading Ramps, 1800 lbs Max Capacity, Folding Ramps for Pickup Truck & Trailer with Load Straps, for Loading Motorcycles, ATVs, Lawn Mowers, and Small Vehicles, 90" L x 12" W (2-Pack)

#3 · Heavy-Duty Pair

3. Stalwart 69-Inch Loading Ramps

• Dimensions: 69.5"L x 8.86"W x 1.57"H
• Load Capacity: 2200 lb
• Material: Alloy Steel
• Weight: 30.9 lb

Best for: Higher-capacity folding steel pair.

Why it ranks #3: The two alloy-steel ramps are rated for 2,200 pounds combined, the highest stated capacity here, and serve four-wheeled vehicles.

A 2,200-pound combined capacity is the defining feature of Stalwart’s two folding steel ramps, enabling a higher-rated loading option for four-wheelers, golf carts, and mowers. Each ramp is rated for 1,100 pounds, and the listed 69-inch length has a recommended usage height of 34 inches.

Use the pair together for four-wheeled equipment within the combined 2,200-pound rating, or use a single ramp for motorcycles and dirt bikes within its 1,100-pound individual rating. At 69 inches long, the ramps have a stated recommended usage height of 34 inches, which helps buyers assess the loading angle before use. Their folding form supports storage between jobs, while the 8.86-inch width defines the track available to each tire.

Skip it if you need long tracks for a taller loading point; LIEKUMM's 83-inch ramps are listed for use up to 30 inches high.

This Stalwart pair suits buyers prioritizing a 2,200-pound combined rating for loading a four-wheeler, mower, or cart. Keep its 34-inch recommended usage height and each ramp’s individual limit in view.

Listed on Amazon as: Loading Ramps – Set of Two 69-Inch Folding Ramps for ATVs, Motorcycles, Mowers, Carts, and More – 2200lb Combined Capacity Car Ramp Set by Stalwart

#4 · Safety Accessories

4. Arejonner 72.5-Inch Ramps

• Dimensions: 72.5"L x 8.7"W x 1.8"H
• Load Capacity: 1500 lb
• Material: Alloy Steel
• Weight: 34.1 lb

Best for: Strapped steel all-weather loading.

Why it ranks #4: This 1,500-pound alloy-steel pair includes four safety straps and gloves, plus a perforated surface intended to increase traction.

Four safety straps pair with a dense perforated steel surface, giving Arejonner buyers both a way to secure the ramps and a traction-focused track for loading. The two 72.5-inch ramps carry a combined 1,500-pound rating and suit ATVs, UTVs, motorcycles, mowers, and other listed equipment.

The perforated surface is specified to increase traction and help prevent wheel slippage and entrapment in varied weather, making it relevant for outdoor loading. Four included safety straps secure the ramps in place, while gloves are supplied for installation. At 72.5 inches long and 8.7 inches wide, the pair offers a more compact track than an extended ramp, and its 1,500-pound capacity is the combined rating for the set.

Skip it if you need longer tracks or aluminum construction; VENDAV's 89-inch aluminum pair is a better match for that preference.

Choose this pair if steel ramps, included securing straps, and a perforated surface suit your loading routine for an ATV or mower. Its 72.5-inch length and combined capacity should guide the fit decision.

Listed on Amazon as: 72.5" Heavy Duty Folding Loading Ramps, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves

#5

5. Arejonner Sandblasted Ramps

• Dimensions: 71"L x 8.86"W x 3.5"H
• Load Capacity: 1500 lb
• Material: Alloy Steel
• Weight: 34.1 lb

Best for: Traction-focused strapped steel ramps.

Why it ranks #5: The 1,500-pound steel pair combines a perforated, sandblasted surface with four safety straps; its listed dimensions are 71 by 8.86 inches.

A sandblasted finish supplements the dense perforated track on this Arejonner steel pair, giving buyers two listed traction features for loading ATVs, motorcycles, and mowers. The set includes four safety straps and gloves, with a combined capacity of 1,500 pounds across its two ramps.

The perforations are specified to improve grip and help prevent wheel slipping and jamming, while the sandblasted finish adds friction and load support. Four straps secure the ramps during setup, and included gloves address handling during installation. The product dimensions list a 71-inch length and 8.86-inch width, so buyers can assess available loading height and tire track space; the stated 1,500-pound capacity is the pair’s rating.

Skip it if you want longer steel tracks; Temushom's 83-inch folding pair provides more listed ramp length for loading.

For buyers who value added surface friction and supplied securing straps, this pair suits ATV, mower, or motorcycle loading. Its 71-inch length and 1,500-pound combined rating remain central fit considerations.

Listed on Amazon as: 72.5" Heavy Duty Folding Loading Ramps with Sandblasted Finish, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves

#6

6. LIEKUMM 83-Inch ATV Ramps

• Dimensions: 83"L x 9"W x 2.8"H
• Load Capacity: 960 lb
• Material: Alloy Steel
• Weight: 12.8 kg

Best for: Step-track loading up to 30 inches.

Why it ranks #6: The pair supports 960 pounds and has step-style traction; its stated maximum use height is 30 inches, so check loading height.

The step-style surface on LIEKUMM’s 83-inch steel ramps is specified to increase traction while letting water drain, helping support loading in wet conditions. Each ramp carries 480 pounds, and the pair’s 960-pound rating is listed for use at heights up to 30 inches.

At 83 inches long and 9 inches wide, each track provides a defined path for a tire, while the 30-inch maximum use height gives buyers a specific loading-height boundary. The step-style surface is intended to resist slipping and allow water drainage, and head plate pads protect the vehicle at the contact point. The pair’s 960-pound capacity means each ramp is limited to 480 pounds, so distribute a four-wheeler’s weight accordingly.

Skip it if you need a higher pair rating; PioneerWorks' 72-inch steel pair lists 1,000 pounds combined capacity.

This pair fits buyers loading a four-wheeler from a point no higher than 30 inches who value drainage and vehicle-contact pads. Check the 960-pound total and 480-pound per-ramp limits.

Listed on Amazon as: LIEKUMM 83" ATV Ramps, 960 lbs Loading Ramps for Pickup Trucks, Silver

#7

7. Temushom 83-Inch Truck Ramps

• Dimensions: 83"L x 9"W x 1.9"H
• Load Capacity: 1000 lb
• Material: Alloy Steel
• Weight: 38 lb

Best for: Welded-hinge folding steel tracks.

Why it ranks #7: This 1,000-pound steel pair measures 83 by 9 inches and has a recommended loading height up to 30 inches.

Reinforced welded hinges distinguish Temushom’s 83-inch folding steel ramps, providing a feature focused on repeated use while keeping the pair foldable for storage. The set supports 1,000 pounds combined, with 500 pounds per ramp, and lists a recommended loading height of up to 30 inches.

Each open ramp measures 83 by 9 inches, giving buyers a long, narrow track for a motorcycle, mower, or ATV. Folding hinges support storage between loading jobs, and the reinforced welded construction is specified for durability with repeated use. The recommended loading height is up to 30 inches, which gives a practical boundary for truck, trailer, shed, or garage use; observe the 500-pound limit on each ramp as well as the pair total.

Skip it if you need more than 1,000 pounds of combined capacity; Stalwart's 69-inch folding pair is listed at 2,200 pounds.

Temushom suits buyers seeking folding steel tracks for a four-wheeler or mower at loading heights up to 30 inches. Its 1,000-pound pair rating and 500-pound individual limits define the usable load.

Listed on Amazon as: Temushom 83" Folding Truck Ramps, 1000 Lbs Capacity, 2 Pcs

#8

8. PioneerWorks 72-Inch Steel Ramps

• Dimensions: 76.38"L x 9.06"W x 1.97"H
• Load Capacity: 1000 lb
• Weight: 39.3 lb

Best for: Textured steel general-purpose pair.

Why it ranks #8: The pair has a 1,000-pound capacity and punched traction surface, but its steel construction and 72-inch listed length offer less reach than longer picks.

A punched, textured surface gives PioneerWorks’ steel ramps a tire-grip feature that also allows water to drain, a useful combination for loading into trucks, trailers, sheds, or garages. The two-ramp set is rated for 1,000 pounds total, with 500 pounds allowed on each ramp.

The 72-inch by 9-inch tracks provide separate paths for a four-wheeler’s tires, while the textured punched surface is specified to improve grip and help prevent wheel slip. Drainage through the surface makes cleaning easier, and rust-resistant steel supports continued use in loading settings. Use both ramps for balanced loading and keep within the 500-pound individual limit as well as the 1,000-pound combined rating.

Skip it if you need a combined rating above 1,000 pounds; Stalwart's 69-inch folding pair lists 2,200 pounds total.

PioneerWorks suits buyers wanting steel tracks for an ATV, mower, or other listed equipment across truck, trailer, shed, or garage use. Keep the 500-pound per-ramp limit in mind when distributing the load.

Listed on Amazon as: PioneerWorks 2-Pack 72" Steel Ramps – 500 lb Each / 1,000 lb Pair,Silver

#9 · Compact Shed Ramps

9. Stalwart 35.5-Inch Shed Ramps

• Dimensions: 35.5"L x 8.5"W x 2"H
• Load Capacity: 600 lb
• Material: Alloy Steel
• Weight: 9 lb

Best for: Compact low-height shed loading.

Why it ranks #9: These short steel ramps provide 1,200 pounds combined capacity and suit sheds or trailers, but their 35.5-inch length limits truck-height use.

At 35.5 inches long, these Stalwart ramps target lower loading points such as sheds and trailers, where a full-length pickup ramp may be unnecessary. The pair carries a combined 1,200-pound rating, and the two tracks can be bolted together to create a 17-inch-wide angled track.

Each steel ramp is rated for 600 pounds, while using both together supports four-wheeled equipment up to the listed 1,200-pound combined limit. The short 35.5-inch tracks suit shed or trailer loading rather than a high loading point, and bolting the ramps together creates a wider 17-inch angled track. Because the connecting bolts are not included, buyers need to supply those separately if they want to join the ramps.

Skip it if you need a longer ramp for a higher loading point; Stalwart's 69-inch folding pair lists a 34-inch recommended usage height.

This compact pair is a fit for shed or trailer loading of equipment within its 1,200-pound combined rating. Choose it with the short ramp length in mind, and provide bolts if joining the tracks.

Listed on Amazon as: Loading Ramps – Set of Two 35.5-Inch Ramps for ATVs, Motorcycles, Mowers, Carts, and More – 1200lb Combined Capacity Shed Ramp Set by Stalwart

#10

10. TARNANVEL 47.2-Inch Shed Ramps

• Dimensions: 47.2"L x 8.9"W x 1.7"H
• Load Capacity: 880 lb
• Material: Alloy Steel
• Weight: 9.9 lb

Best for: Portable short-height trailer ramps.

Why it ranks #10: The 880-pound pair is designed for shed or trailer heights below 13 inches, making it the least suited option for typical truck-bed loading.

A 47.2-inch length and specified use below 13 inches make this TARNANVEL pair a compact option for low sheds and trailers. The two steel ramps carry an 880-pound combined rating and are listed for ATVs, motorcycles, and lawn mowers, with hook ropes included.

The short tracks suit loading points below 13 inches, so buyers can match the ramp length to a low trailer or shed rather than a taller truck bed. Each ramp is rated for 440 pounds, for 880 pounds combined when used as a pair. The supplied description lists two 2-meter hook ropes and a glove, while the 9.9-pound listed weight supports easier carrying between storage and loading locations.

Skip it if you load from a point above 13 inches; LIEKUMM's 83-inch ramps are listed for heights up to 30 inches.

Pick this pair for lighter ATV or mower loading into low sheds and trailers where the below-13-inch height limit fits. Its 440-pound per-ramp rating also matters when splitting the load.

Listed on Amazon as: 2 PCS Trailer Ramps, 47.2" L x8.9 Shed Ramp 880lb Capacity Portable Lightweight Waterproof Sturdy Anti-Slip Loading Ramps for Motorcycle Lawn Mowers ATVs