Best Rear Hitch For Travel Trailer: Compare 10 Receivers

#1 · Best Overall

1. CURT 13703 Adjustable Hitch

• Material: Carbon Steel
• Material Type: Carbon Steel
• Compatible with Vehicle Type: ATV, Marine-Personal-Craft, Trailer

Best for: Wide-frame adjustable RV hitch.

Why it ranks #1: Its 2-inch receiver fits compatible RV frames up to 72 inches wide, with 3,500-pound gross trailer weight and 350-pound tongue weight ratings.

CURT’s 13703 adds a 2-inch receiver to compatible RV, camper, and motorhome frames up to 72 inches wide, with ratings of 3,500 pounds gross trailer weight and 350 pounds tongue weight. The adjustable format supports a range of frame widths, while the listing places clear limits on towing use.

The adjustable hitch is specified for frames up to 72 inches wide, helping buyers assess whether its mounting span suits an RV, camper, or motorhome. Its 2-inch receiver supports accessories, cargo carriers, trailers, or small-vehicle towing as listed. CURT gives maximum ratings of 3,500 pounds gross trailer weight and 350 pounds tongue weight, limited by the lowest-rated component, RV frame capacity, and vehicle-maker limits. It is not rated for weight-distribution use, so that towing setup is outside its stated application.

Skip it if you need a weight-distribution hitch setup; the CURT 13703 is explicitly not rated for that use.

Choose the 13703 if your compatible RV, camper, or motorhome frame is no wider than 72 inches and you need a 2-inch receiver. Its ratings remain subject to frame and vehicle limits, and it does not support weight-distribution use.

Listed on Amazon as: CURT 13703 Adjustable RV Trailer Hitch, 2 Inch Receiver, Fits Camper and Motorhome Frames up to 72 Inches Wide, 3,500 lbs GTW, 350 lbs TW

#2 · Adjustable Frame Fit

2. ALMULOO Adjustable Hitch

• Material: Alloy Steel
• Material Type: Alloy Steel
• Compatible with Vehicle Type: RV

Best for: Adjustable higher-capacity RV hitch.

Why it ranks #2: The three-piece adjustable design fits frames up to 7 feet and lists 3,500-pound trailer and 350-pound tongue weight ratings.

ALMULOO lists a 3,500-pound trailer-weight rating and 350-pound tongue-weight rating for its adjustable RV hitch, giving towing-focused buyers explicit limits to evaluate. The three-piece design is described as direct bolt-on, and its 2-inch receiver accepts accessories such as ball mounts, cargo racks, and bike racks.

A 2-inch receiver accommodates the listed ball mounts, cargo racks, and bike racks, allowing one hitch to serve several accessory roles. ALMULOO specifies a 3,500-pound trailer-weight rating and 350-pound tongue-weight rating, which provide concrete limits for planning a load. The three-piece adjustable design and direct bolt-on installation are intended to simplify mounting, while the listing says it fits frames up to 7—without completing the measurement. Vertical hanging bike racks are specifically excluded, so rack style matters.

Skip it if you use a vertical hanging bike rack; this hitch explicitly does not support that rack style.

Consider ALMULOO if your RV needs a bolt-on adjustable receiver for towing or compatible 2-inch accessories and the stated ratings suit your load. Avoid it for vertical hanging bike racks, and do not infer a frame-width measurement from the incomplete listing.

Listed on Amazon as: ALMULOO Adjustable RV Trailer Hitch 2" Class 3, RV Tow Receiver Hitch Fits

#3 · Best Bumper Hitch

3. CURT 19100 Bumper Hitch

• Material: Carbon Steel
• Material Type: Carbon Steel
• Compatible with Vehicle Type: ATV, Marine-Personal-Craft…

Best for: Four-inch bumper towing receiver.

Why it ranks #3: This four-inch-beam bumper hitch adds a 2-inch receiver and lists 3,500-pound gross trailer weight and 350-pound tongue weight ratings.

The CURT 19100 combines a 3,500-pound gross-trailer-weight rating with a 350-pound tongue-weight rating in a bumper hitch for 4-inch beams. Its 2-by-2-inch receiver accepts standard accessories, though CURT specifically excludes vertical-hanging bike racks, a useful boundary for buyers choosing a rack setup.

A 4-inch beam fit and standard 2-by-2-inch receiver make this a defined bumper-mounted option for compatible RV accessories or towing applications. CURT lists 3,500 pounds gross trailer weight and 350 pounds tongue weight, subject to the lowest-rated towing component. Those ratings help frame load planning, but do not supersede other limits. The receiver is not compatible with vertical hanging bikes or racks that mount bikes vertically, so choose a supported rack configuration before buying.

Skip it if you carry bikes on a rack that hangs or mounts them vertically; CURT specifically excludes that configuration.

The CURT 19100 suits owners with a 4-inch beam who want a standard receiver and the listed towing ratings. It is a poor match for vertical-hanging bike racks, and the lowest-rated towing component still controls system capacity.

Listed on Amazon as: CURT 19100 Camper RV Bumper Hitch, Fits 4-Inch Beam, 2-In Receiver, 3,500 lbs

#4 · Wide Beam Range

4. YZONA RV Bumper Hitch

• Material: Carbon Steel
• Material Type: Carbon Steel
• Compatible with Vehicle Type: RV

Best for: Higher-rated wide-range bumper hitch.

Why it ranks #4: It fits rear beams from 2 to 4 inches and lists 3,500-pound gross trailer weight and 350-pound tongue weight capacities.

YZONA’s bumper hitch lists a 3,500-pound gross-trailer-weight capacity and 350-pound tongue-weight capacity, making it an option for buyers who need stated towing limits alongside a 2-inch receiver. Its fit range covers rear beams from 2 to 4 inches, and a black protective coating is specified for corrosion resistance.

The 2-to-4-inch rear-beam fit range gives this receiver broader stated beam compatibility than a single-size bumper mount. Its 2-inch opening supports the listed uses of cargo carriers, bike racks, RV tire carriers, and ball mounts. YZONA specifies up to 3,500 pounds gross trailer weight and 350 pounds tongue weight, so those figures can guide load planning. High-strength carbon steel and a black corrosion-resistant coating are described, helping address durability in outdoor RV use.

Skip it if you need a hitch rating to override a lower RV or component limit; the listing does not establish your complete system capacity.

YZONA fits RV owners seeking a 2-inch rear-beam receiver with listed towing figures and compatibility across 2-to-4-inch beams. Use the ratings alongside the limits of the RV and every connected component, not as a standalone capacity guarantee.

Listed on Amazon as: YZONA RV Bumper Hitch Receiver, 2" Tow Hitch Trailer, 3500 LBS Capacity Fits 2 inch to 4 inch Rear Beams, Towing Adapter Openning for Camper Cargo Carrier Bike Racks RV Tire Carrier Ball Mounts

#5

5. KUAFU Trailer Hitch Receiver

• Compatible with Vehicle Type: Marine-Personal-Craft, Trailer

Best for: Two installation classes for trailers.

Why it ranks #5: It offers a 2-inch receiver for travel trailers and fifth wheels, with stated tongue weight figures varying by bolted or welded installation.

KUAFU’s 2-inch receiver separates its frame attachment into bolted Class I and welded Class II options, giving trailer owners different stated tongue-weight limits for those setups. The listing names travel trailers and fifth wheels, and also describes uses ranging from bike carrying to towing small trailers and popup campers.

For a bolted Class I installation, KUAFU lists a maximum tongue weight of 200 pounds; its welded Class II configuration is listed at 300 to 350 pounds. That distinction helps buyers compare the stated limits before choosing an attachment method. The 2-inch hitch is described for travel trailers and fifth wheels, with the listing also naming popup campers, boat trailers, and bikes as uses. Steel construction and a powder-coated finish are specified; installation depends on the selected class.

Skip it if you cannot use the stated frame attachment method for the class you need; its listed tongue limits depend on bolting or welding.

KUAFU suits buyers comparing bolted Class I and welded Class II frame installations for trailer accessories or the listed towing uses. Choose by the applicable attachment method and tongue-weight limit; the two classes are not interchangeable ratings.

Listed on Amazon as: KUAFU 2" Towing Hitch Receiver for Travel Trailers and Fifth Wheels

#6 · Class I or II

6. Stromberg Carlson CC-300

• Material: Alloy Steel
• Material Type: Alloy Steel
• Compatible with Vehicle Type: Car, Trailer

Best for: Adjustable frame-mount accessory hitch.

Why it ranks #6: Its adjustable 2-inch receiver is designed for travel trailers and fifth wheels, with bolted Class I or welded Class II installation options.

The Stromberg Carlson CC-300 offers a 2-inch receiver for travel trailers and fifth wheels, giving owners a place to mount bike racks or cargo carriers at the rear. Its adjustable format supports two installation approaches, so buyers can choose a bolted Class I setup or a welded Class II installation on the frame.

The 2-inch receiver accepts compatible bike racks and cargo carriers, extending storage and carrying options to the back of a camper. Its Class I bolt-on and Class II weld-on choices let the installer select an attachment method for the frame, rather than treating both setups as identical. The hitch is alloy steel and weighs 46.9 pounds, so plan for handling that weight during installation. This is an accessory receiver, not a stated trailer-towing rating.

Skip it if you need a stated towing rating; the CC-300 is presented as an accessory hitch for racks and carriers.

Choose the CC-300 if you want a rear receiver for bike racks or cargo carriers and need a choice between bolting and welding. Its supplied details do not establish a towing capacity, so keep the use to supported accessories.

Listed on Amazon as: Stromberg Carlson CC-300 Adjustable Accessory Hitch – Hitch Receiver for Bike Rack and Carriers, Ideal for Back of Camper, Travel Trailer & RV, Camper Trailer Hitch, Adjustable Truck Hitch, Black

#7

7. HECASA Adjustable Hitch

• Material: Alloy Steel
• Material Type: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: Adjustable fifth-wheel receiver.

Why it ranks #7: This adjustable steel hitch is listed for RV travel trailers and fifth wheels, but the supplied product details give no capacity or fit dimensions.

HECASA’s adjustable trailer hitch pairs a 2-inch receiver with a fit aimed at RV travel trailers and fifth wheels, giving owners a standard opening for compatible hitch accessories. Its alloy-steel construction and black powder-coated finish are identified in the product title, while the supplied specifications confirm trailer compatibility.

The 2-inch receiver provides the stated opening size for compatible accessories, and the adjustable format offers an alternative to a fixed-position hitch. Its listed trailer compatibility covers the intended RV trailer use, including the travel-trailer and fifth-wheel applications named in the title. Alloy steel is the specified material, while the black powder-coated description identifies the finish. The supplied listing does not provide a load rating or installation method, so buyers should not infer either from the adjustable design.

Skip it if you need a published tongue-weight or gross-trailer-weight rating; those figures are not supplied for this HECASA hitch.

This HECASA option suits an RV owner seeking an adjustable 2-inch receiver for trailer use, including fifth wheels. Its listed facts leave load limits and installation details unspecified, so it is not the choice for buyers who need those figures upfront.

Listed on Amazon as: HECASA Adjustable Trailer Hitch with 2'' Receiver Compatible Universal RV Travel Fifth Wheel Steel Black Powder Coated (NN1159)

#8

8. Nilight Bumper Hitch Receiver

• Material: Alloy Steel, Carbon Steel
• Material Type: Alloy Steel, Carbon Steel
• Compatible with Vehicle Type: Trailer

Best for: Bolt-on beam accessory receiver.

Why it ranks #8: It fits 4- to 4.5-inch beams and lists 200 pounds tongue weight, but its accessory-focused receiver is less suitable for trailer towing.

Nilight’s bumper receiver fits beams measuring 4 to 4.5 inches and has a 2-inch opening, bringing standard bike racks and cargo carriers to a compatible camper bumper. The listing gives a 2,000-pound gross-trailer-weight figure and 200-pound tongue-weight figure, with a warning that the lowest-rated towing component governs.

The 2-inch receiver works with most bike racks and cargo carriers that use a 2-inch shank, making it useful for common hitch-mounted accessories. Its specified fit is for 4-to-4.5-inch beams, and the product title identifies bolt-on installation. Nilight lists 2,000 pounds gross trailer weight and 200 pounds tongue weight, while cautioning that capacity is limited by the lowest-rated towing component. The product information also describes alloy and carbon steel construction; check the complete system limits before use.

Skip it if you need the receiver alone to determine your allowable load; the listing makes the lowest-rated towing component controlling.

Nilight suits owners with a 4-to-4.5-inch beam who want a bolt-on 2-inch receiver for compatible racks or carriers. Treat its listed capacities as system-dependent, since another lower-rated towing component can set the actual limit.

Listed on Amazon as: Nilight RV Bumper Hitch Receiver Fits for 4-4.5 inches Beams 2 inch Receiver 200 LBS Capacity Bolt-On Heavy Duty Steel for Camper Bike Racks Cargo Carriers

#9

9. TOPTOW Bumper Hitch Receiver

• Material: Metal
• Material Type: Metal
• Compatible with Vehicle Type: travel trailer RV

Best for: Four-inch bumper accessory receiver.

Why it ranks #9: It fits continuous steel bumpers from 4 to 4.5 inches and has 200 pounds tongue weight capacity, but is not intended for trailer towing.

The TOPTOW receiver fits continuous steel bumper beams from 4 to 4.5 inches wide and provides a 2-inch opening, making it a focused option for compatible bike racks and cargo carriers. Four threaded bolts and nuts support bumper installation, while its stated 200-pound tongue-weight capacity sets a clear accessory-load boundary.

The 2-inch tube opening fits most bike racks and cargo carriers with a 2-inch shank, connecting common accessories to the RV bumper. Its stated 200-pound tongue-weight capacity gives buyers a load figure to consider, but the listing explicitly says it is not intended for RV-level trailer towing. Four full-threaded bolts and nuts are supplied for mounting, and the receiver is specified for continuous steel bumper beams measuring 4 to 4.5 inches. Hitch pin and lock are not included.

Skip it if you want a hitch for towing another trailer; this receiver is explicitly limited to accessory use.

Pick the TOPTOW for a compatible 4-to-4.5-inch continuous steel bumper and 2-inch-shank bike rack or cargo carrier. It is an accessory receiver, not an RV-level towing hitch, and its pin and lock are separate.

Listed on Amazon as: TOPTOW RV Bumper Hitch Receiver for 4in to 4.5in Beams, 2in Receiver | Fits for Bike Racks, Cargo Carriers Camper-on

#10

10. MAXXHAUL 50173 Receiver

• Material: Alloy Steel
• Material Type: Alloy Steel
• Compatible with Vehicle Type: RV

Best for: Four-inch square bumper accessories.

Why it ranks #10: This 4-inch-square-bumper accessory adapter has a 200-pound tongue weight capacity and explicitly is not intended for RV-level trailer towing.

The MAXXHAUL 50173 adds a 2-by-2-inch receiver to a 4-inch square RV bumper, providing a mount for compatible 2-inch-shank accessories. Its stated 200-pound tongue-weight capacity and all-steel construction help define both the load boundary and build material, while the listing identifies bike racks and tire carriers as uses.

The receiver is specified for 4-inch square RV bumpers, narrowing the fit to that bumper shape and size. Its 2-by-2-inch opening accepts hitch-mounted accessories with 2-inch shanks, including bike racks and RV tire carriers; the listing also mentions hitch steps. A 200-pound tongue-weight capacity sets the stated limit. The all-steel construction is described as durable and rust resistant. The supplied description cautions about cargo-carrier use and says this adapter is not for RV-level trailer towing.

Skip it if you need to tow another trailer from the RV bumper; the listing rules out RV-level trailer towing.

The 50173 fits owners with a 4-inch square bumper seeking a receiver for listed accessories such as bike racks or tire carriers. Respect its 200-pound tongue-weight limit and the explicit boundary against RV-level trailer towing.

Listed on Amazon as: MaxxHaul 50173 Hitch Receiver 2" x 2" Adapter for 4 inch Square RV Bumpers