Best Rubber Speed Bumps For Asphalt: Compare 10 Options

#1 · Best Overall

1. Loumernhant Rubber Speed Bumps

• Dimensions: 72.05"L x 11.81"W x 2"H
• Weight: 197.5 lb
• Load Capacity: 25000 lb
• Material: Rubber

Best for: Four-piece cable-routing layouts.

Why it ranks #1: The listing explicitly names asphalt use and supplies four 6-foot sections, dual cable channels, and a stated 25,000-pound capacity.

Four 6-foot rubber speed bumps make this Loumernhant set the choice for buyers mapping several traffic-control sections, with dual channels built into the cable-protector design. The product lists a 25,000-pound capacity and recycled industrial-grade rubber, joining multi-piece coverage with cable routing.

Each listed section measures 72.05 by 11.81 inches and is 2 inches high, helping buyers plan the footprint across a driveway, road, or parking lot. Four pieces can serve a multi-section layout, and the integrated dual channels route wires or hoses across traffic. Recycled industrial-grade rubber and the stated capacity above 25,000 pounds support heavy-duty use. The description also cites resistance to extreme weather and UV rays, relevant to outdoor placement.

Skip it if you only need two short sections; Curtainboro's 3.3Ft two-pack takes less listed length per piece.

Choose Loumernhant for a multi-section driveway, road, or parking-lot layout that needs dual cable channels and a high stated capacity. Its four-piece, 197.5-pound set calls for planning handling and placement.

Listed on Amazon as: 4 Pack – 6Ft Heavy Duty Rubber Speed Bumps for Road, 25000 Lbs Rubber Speed Bumps with 2 Channel Cable Protector, Heavy Duty Traffic Calming Hump for Driveway, Road, Asphalt, Concrete, Parking Lot

#2 · Best Bolt-In Set

2. WKINGBOOM Rubber Speed Bumps

• Dimensions: 72"L x 12"W x 2.4"H
• Weight: 35.7 lb
• Load Capacity: 22000 lb
• Material: Rubber

Best for: Bolt-fixed asphalt installations.

Why it ranks #2: It names asphalt compatibility, lists eight fixing bolts, and gives two 72-inch ramps with a 22,000-pound capacity.

Eight bolts are supplied to fix these two 72-inch WKINGBOOM speed bumps to the road, making the set a clear option when mechanical anchoring matters. Recycled rubber, dual channels, and a 22,000-pound capacity add cable-routing and heavy-traffic functions to that installation approach.

Each bump measures 72 by 12 inches and stands 2.4 inches high, dimensions that help establish the crossing footprint on asphalt, concrete, or gravel. Two channels provide cable-protection space, with a stated single-channel size of 2.35 inches wide by 1.5 inches high. The product lists 100% recycled rubber and a 22,000-pound capacity. Eight bolts are specified for fixing, supporting a more secured placement workflow than simply laying the sections down.

Skip it if you need a 1.8-inch-high profile; OranLite's 72-inch speed bumps list that lower height.

Select WKINGBOOM when bolt fixing, cable channels, and recycled rubber are priorities for an asphalt or gravel crossing. Its 2.4-inch height and 72-inch length are key fit considerations for the site.

Listed on Amazon as: 6ft Rubber Speed Bumps, 2 Pack Heavy Duty Traffic Speed Humps with 8 Bolts, 22,000 lbs Capacity Speed Bump Ramps for Driveway, Parking Lot, Gravel Roads, Asphalt & Concrete

#3 · Best Warranty

3. Happybuy Rubber Speed Bumps

• Dimensions: 72.8"L x 12.2"W
• Weight: 52.16 kg
• Material: Rubber

Best for: Textured heavy-duty cable crossing.

Why it ranks #3: Its listing explicitly covers asphalt and gives two 72.4-inch sections, dual cable channels, a 22,046-pound capacity, and a one-year warranty.

A slide-resistant surface and yellow warning strips give this two-pack visible, grippy contact for vehicles crossing a driveway, while dual channels protect cables. With a stated 22,046-pound capacity and a 72.4-inch length, it combines traffic calming and cord routing in a substantial rubber ramp.

The 72.4-by-12-inch format and 2.4-inch height establish a broad, raised crossing for cars, trucks, SUVs, and wheelchairs, as listed in the product facts. Dual channels keep cables routed beneath traffic, while the industrial-level rubber is described as shock-absorbing and less prone to breakage than PVC. Yellow surface strips help drivers notice the ramp, and screw-in installation indicates a fixed placement rather than a temporary loose crossing.

Skip it if you need an 84-inch run with end caps; PioneerWorks' 7 FT set lists four end caps.

Pick the Happybuy set for asphalt or concrete crossings where cable routing, a textured surface, and a stated high load capacity matter. Its 2.4-inch height and screw-in installation should fit the intended traffic route.

Listed on Amazon as: VEVOR 2Pcs 6FT Rubber Speed Bumps for Road- Heavy Duty Speed Bump for Driveway,72.4'' x 12'' x 2.4'' Modular Traffic Hump, Cable Protector Ramps, Floor Cord Covers for Asphalt, Concrete, Gravel

#4 · Longest Sections

4. MERXENG Rubber Speed Bumps

• Dimensions: 84"L x 11.8"W x 2"H
• Weight: 101 lb
• Load Capacity: 25000 lb

Best for: Long driveway traffic control.

Why it ranks #4: The 84-inch sections are longer than most options, and the listing names asphalt use with a stated 25,000-pound capacity.

At 84 inches long, this two-pack gives driveway owners a longer speed-bump section than a six-foot format, while its listed 25,000-pound capacity supports heavy-duty traffic use. The title also specifies end caps and two channels, combining a longer traffic-control run with cable-protector functionality.

The 84-by-11.8-by-2-inch dimensions define the footprint for planning a driveway or parking-area installation, and the two-pack supplies two sections. Its 25,000-pound listed load capacity supports a heavy-duty application. The title identifies end caps and a two-channel modular cable-protector design, useful where a route crosses the traffic path. The product description also presents it for asphalt, concrete, and gravel driveways, offering flexibility across those listed surfaces.

Skip it if you need documented screw hardware in the box; WKINGBOOM's 6ft model lists eight bolts for fixing.

This MERXENG set suits driveway and parking-area buyers wanting an 84-inch section, end caps, and cable channels. Its 2-inch height and 11.8-inch width remain important footprint considerations when planning the placement.

Listed on Amazon as: 7Ft Recycled Rubber Speed Bump for Driveway with End Caps, 2 Packs Heavy Duty Traffic Calming Hump with 25000 Lbs Capacity, 2 Channel Modular Cable Protector Ramps for Asphalt Concrete Gravel Driveway

#5

5. VEVOR 2-Channel Speed Bumps

• Dimensions: 72.8"L x 12.2"W x 2.2"H
• Weight: 110 lb
• Load Capacity: 22000 lb
• Material: Rubber

Best for: Cable-routing asphalt entrances.

Why it ranks #5: Two 72.8-inch rubber sections have dual channels and a stated 22,000-pound capacity; the listing identifies roads and parking lots.

Two 72.8-inch rubber sections pair a 22,000-pound load capacity with dual underside channels, letting a parking-lot operator slow traffic while routing cables or allowing drainage beneath the ramp. The included screws and drill bit support a screw-in setup where a fixed traffic-control point is preferred.

Each section measures 72.8 by 12.2 inches and stands 2.2 inches high, giving buyers a substantial rubber surface for road or parking-lot use. The two 1.2-inch-wide, 1.6-inch-high channels accommodate cable protection or drainage, so the routing function is integrated beneath the bump. Recycled industrial-level rubber and the stated 22,000-pound capacity suit vehicle traffic. Two bumps, 12 screws, and a drill bit are included for installation planning.

Skip it if you need a longer 84-inch run; MERXENG's 7Ft recycled-rubber set covers more length.

Choose this VEVOR set for a driveway or parking area where two channels for cables or drainage matter alongside traffic calming. Its 72.8-inch sections and 2.2-inch height should suit the site layout.

Listed on Amazon as: VEVOR 2 Pack 6 FT Rubber Speed Bump Heavy Duty 2 Channel

#6

6. PioneerWorks Rubber Speed Bumps

• Dimensions: 83.94"L x 11.81"W x 1.97"H
• Weight: 108 lb
• Load Capacity: 25000 Lbs
• Material: Rubber

Best for: End-capped longer driveway runs.

Why it ranks #6: Its 83.94-inch sections and stated 25,000-pound capacity suit longer installations; the listing names asphalt, though no mounting hardware is specified.

Four end caps accompany this PioneerWorks 7-foot, two-piece set, giving buyers a longer speed-bump run with finished ends for transitions. The product states a 25,000-pound capacity and describes speed reduction to 5–15 mph, positioning it for residential streets, school zones, and parking lots.

At 83.94 inches long, each section offers a longer run than the listed six-foot options, while the 11.81-inch width and 1.97-inch height help define its footprint. Four end caps are specified to address the edges, and the product description says they provide smoother transitions for cars, bikes, and wheelchairs. Recycled rubber and a 25,000-pound capacity support the listed heavy-duty use; asphalt, concrete, and gravel are named in the title.

Skip it if you need documented cable-routing channels; MERXENG's 7Ft set specifies a two-channel cable-protector design.

PioneerWorks fits buyers seeking a longer residential-street or parking-lot run with end caps and a stated speed range. Its 1.97-inch height and listed 11.81-inch width should match the intended approach and traffic path.

Listed on Amazon as: 7 FT Rubber Speed Bump with 4 End Caps, 84" Speed Bumps for Driveway 2 Pack, 25,000 Lbs Capacity Heavy Duty Speed Hump for Low Cars, RVs, Parking Lots, Residential Streets, Asphalt, Concrete, Gravel

#7 · Most Compact

7. ExploreHorizon Rubber Speed Bumps

• Dimensions: 39.96"L x 12.4"W x 5.51"H
• Load Capacity: 25000 lb

Best for: Temporary short cable crossings.

Why it ranks #7: Two roughly 40-inch sections explicitly suit asphalt and offer dual channels with a stated 25,000-pound capacity, but cover less length.

At just under 40 inches long, this two-pack targets temporary or localized traffic control rather than a long continuous crossing. Its recycled-rubber construction, dual cable channels, and listed 25,000-pound capacity combine a compact footprint with cable protection for asphalt, concrete, and gravel roads.

The 39.96-by-12.4-inch dimensions make each section shorter than the six-foot options, which can suit a targeted crossing or temporary placement. A 5.51-inch listed height creates a much taller profile, so site clearance and vehicle approach deserve particular attention. Dual channels support cable protection, while the 25,000-pound capacity and recycled rubber are specified for heavy-traffic use. The product facts describe it as easy to install and remove as needed.

Skip it if you need a lower crossing; Curtainboro's 3.3Ft model is listed as 2 inches high.

ExploreHorizon suits buyers needing a short, removable crossing with cable channels for a localized asphalt, concrete, or gravel-road application. Its unusually tall 5.51-inch listed height is a critical fit consideration.

Listed on Amazon as: Recycled Rubber Speed Bump 3.3ft 2Pack – Industrial-Grade for Asphalt, Temporary Use for Driveways, 6cm High for Gravel Roads, Durable Rubber Design, Ideal for Neighborhood Roads.

#8

8. OranLite Traffic Speed Bumps

• Dimensions: 72"L x 12.5"W x 1.8"H
• Weight: 39 lb
• Load Capacity: 28000 lb
• Material: Rubber

Best for: High-capacity two-pack coverage.

Why it ranks #8: The two 72-inch rubber sections have the highest listed capacity at 28,000 pounds, though the supplied data does not specifically name asphalt.

A 28,000-pound listed load capacity is the defining specification of OranLite's two-pack, giving buyers a heavy-duty option for traffic-control placement. Each 72-inch rubber section is 12.5 inches wide and 1.8 inches high, a relatively low profile among the dimensions supplied for this roundup.

The two 72-inch sections provide paired coverage for a road or driveway installation, while their 12.5-inch width sets the transverse footprint to plan around. At 1.8 inches high, the profile is lower than products in this group with taller listed dimensions. The rubber construction and 28,000-pound capacity speak to heavy-duty use, though the supplied specifications do not describe cable channels or an installation method, so those should not be assumed.

Skip it if you need stated dual cable channels; Curtainboro's 3.3ft model specifies two 1.4-by-1-inch channels.

OranLite suits buyers seeking a two-piece rubber traffic bump with a stated 28,000-pound capacity and a 1.8-inch profile. Its supplied specifications focus on dimensions and load rating, so prioritize it when those are the deciding factors.

Listed on Amazon as: 6-Foot Heavy-Duty Traffic Speed Bump, 72" Inch Road Bumps, 2-Pack

#9

9. Curtainboro Rubber Speed Bump

• Dimensions: 39.37"L x 11.81"W
• Weight: 52.4 lb

Best for: Short garage cable protection.

Why it ranks #9: Its two approximately 39-inch sections include dual cable channels and a stated 25,000-pound capacity, but asphalt compatibility is not specified.

Dual channels measuring 1.4 inches wide by 1 inch high make this Curtainboro two-pack useful where cords or hoses cross a short traffic path. Its 3.3-foot rubber sections are made from recycled material and carry a stated 25,000-pound load capacity for heavy-duty settings.

Each section is listed at 39.37 inches long and 11.81 inches wide, providing a compact footprint for a garage, parking area, or road. The two cable channels are specified for extension cords, power cables, and hoses, helping keep those lines beneath vehicle and foot traffic. Recycled industrial-grade rubber and the 25,000-pound capacity support the stated heavy-duty application. Screw-in installation indicates a fixed setup, useful when the crossing is intended to stay in place.

Skip it if you need a longer single section; PioneerWorks' 7 FT set lists 83.94-inch pieces with end caps.

Curtainboro fits garages and short crossings where cable protection and screw-in placement matter. Its 39.37-inch length per section limits coverage, so buyers planning a long driveway run should account for the compact format.

Listed on Amazon as: 3.3Ft Rubber Speed Bump, (2Packs) Heavy Duty Recycled Rubber Speed Bump, 2 Inch High Industrial-Grade Calming Hump for Parking, Garage,Roads

#10

10. VEVOR Driveway Speed Bumps

• Dimensions: 7205"L x 11.81"W
• Weight: 93.7 lb
• Material: Rubber

Best for: Self-adhesive busy access routes.

Why it ranks #10: It lists rubber construction and a 22,000-pound-per-axle claim, but its stated 7205-inch length is inconsistent and asphalt fit is unclear.

Self-adhesive installation distinguishes this VEVOR speed bump for buyers seeking a placement method that does not rely on the listed screw-in approach. Its product facts also cite a 22,000-pound-per-axle capacity and wear resistance for high-traffic areas with vehicle and foot traffic.

The rubber construction and wear-resistant description suit locations exposed to repeated foot and vehicle movement, while the stated 22,000-pound-per-axle capacity addresses truck traffic. The product information lists compatibility with SUVs, vans, wheelchairs, motorcycles, bikes, scooters, and carts, so mixed-use routes are within its described scope. Self-adhesive installation affects setup choices on asphalt; buyers should account for the surface and the listed 11.81-inch width when positioning it.

Skip it if you want specified bolts for mechanical fixing; WKINGBOOM's 6ft speed bumps list eight bolts.

This VEVOR model fits buyers prioritizing self-adhesive placement on a busy access route, including one used by vehicles and mobility devices. Check that the 11.81-inch width and adhesive installation approach suit the asphalt surface.

Listed on Amazon as: VEVOR 2PCS 6FT Rubber Driveway Speed Bumps for Road, Heavy Duty 2 Channel