Best Shocks For 4 Inch Lift for Trucks and Jeeps

#1 · Best Overall

1. TrendsAuto 5100 Series

• Compatible with Vehicle Type: Truck
• Material Type: Zinc

Best for: Super Duty monotube set seekers.

Why it ranks #1: A complete monotube front-and-rear set explicitly fits 2005–2016 F250/F350 Super Duty 4WD with a 4-inch lift.

A complete front-and-rear monotube set for 2005–2016 Ford F-250/F-350 Super Duty 4WD trucks with a 4-inch lift is the core appeal here. Digressive valving is described as reacting to changing surfaces, supporting a more stable, comfortable ride.

The digressive valving aims to respond quickly as road conditions change, linking the shock design to control across work routes and trails. Zinc plating is described as weather resistant, and vulcanized neoprene rubber bushings add a specified durable mounting component. The package includes two front and two rear shocks plus OEM-certified mounting hardware, supporting a bolt-on installation workflow. Its stated fit is restricted to 2005–2016 F-250/F-350 Super Duty 4WD models with a 4-inch lift.

Skip it if you have a two-wheel-drive truck, a different model year, or a lift other than the listed four inches.

This set fits the stated 2005–2016 F-250/F-350 Super Duty 4WD, 4-inch-lift application and includes hardware for all four corners. Buyers outside that model and lift specification should select a different fit.

Listed on Amazon as: TrendsAuto 5100 Series Set of Front & Rear Monotube Shocks fits 2005-2016 F250 F350 Super Duty 4WD with 4" Lift | Includes TrendsAuto Decal | 24-185776 24-062466

#2 · Best HD Lift Range

2. Bilstein B8 5100 Kit

• Compatible with Vehicle Type: Truck
• Material Type: Metal
• Weight: 23.8 lb

Best for: Late-model HD lifted trucks.

Why it ranks #2: Includes front and rear shocks for 2011–2025 Silverado/Sierra 2500/3500, with stated 4–6-inch front and 3–4-inch rear lift fitment.

Lift-specific front and rear fit ranges distinguish this Bilstein B8 5100 set: 4–6 inches at the front and 3–4 inches at the rear. It is listed for 2011–2025 Silverado and Sierra 2500/3500 trucks and uses velocity-sensitive digressive valving.

The digressive valving is described as reacting instantly to changing road conditions, supporting controlled travel on paved roads and rough terrain. The four-shock package includes two front and two rear units, matched to separate front and rear lift ranges. Installation is limited to stock mounting points; the listing explicitly excludes trucks with a lower control arm torsion bar relocation bracket. That boundary is important for owners whose suspension setup uses the bracket, even when the lift heights fall within the stated ranges.

Skip it if your setup uses a lower control arm torsion bar relocation bracket; the listing explicitly excludes that configuration.

This Bilstein set suits a 2011–2025 Silverado or Sierra 2500/3500 with 4–6 inches of front lift and 3–4 inches at the rear. It requires stock mounting points and excludes the specified relocation bracket.

Listed on Amazon as: Bilstein Set of Front & Rear B8 5100 Series Shocks Compatible with 2011-2025 Silverado Sierra 2500 3500 with 4-6" Front Lift and 3-4" Rear Lift | Easy Installation | Built to Last

#3 · Best 4–6-Inch Match

3. Bilstein 5100 Gas Shocks

• Compatible with Vehicle Type: Truck
• Material Type: Metal
• Weight: 25 lb

Best for: Sierra owners needing four shocks.

Why it ranks #3: The four-shock set specifies 4–6-inch front and 4-inch rear lift fitment for GMC Sierra 2500 HD 4WD or RWD.

Extended-length shocks matched to 4–6-inch front lifts and 4-inch rear lifts make this Bilstein 5100 set a specific choice for 1999–2010 GMC Sierra 2500 HDs. It includes two front and two rear shocks and lists compatibility with both 4WD and RWD vehicles.

The 46mm digressive piston is intended to improve road handling on and off road, while the monotube body transfers heat from the shock oil to the body to help reduce shock fade. Those features suit buyers seeking a four-corner replacement for a lifted Sierra rather than a rear-only pair. Washers, bushings, reservoir clamps, and nuts are included, and factory mounting bolts are reused. Mounting plates are sold separately, so include that requirement in installation planning.

Skip it if you need mounting plates included with the shock package; the listing says they are sold separately.

This set suits a 1999–2010 GMC Sierra 2500 HD owner seeking front and rear shocks for the stated lift ranges, in either 4WD or RWD. Account for separately sold mounting plates before planning installation.

Listed on Amazon as: Bilstein 5100 Gas Shocks Set for 99-10 GMC Sierra 2500 HD 4WD RWD w/4-6" lift

#4 · Best Wrangler Set

4. Rancho RS5000X Set

• Compatible with Vehicle Type: Car
• Material Type: Metal

Best for: Jeep JK lift-kit owners.

Why it ranks #4: This complete set is extended for 3–4-inch front and rear lifts on 2007–2015 Jeep Wrangler JK 4WD.

Extended-length shocks for 3–4-inch front and rear lifts make this Rancho RS5000X set a targeted option for 2007–2015 Jeep Wrangler JK 4WDs. The four-shock package covers both ends, while supplied washers, bushings, and nuts support installation using the factory shock mounting bolts.

Rancho’s patented rebound valving and advanced compression phase are intended to support handling and performance, giving buyers a shock tuned around more than its extended length. The specified 3–4-inch lift range applies to both front and rear, and the listing names compatible Rancho lift systems. Four shocks and the included installation hardware provide a complete front-and-rear set; reusing factory mounting bolts keeps the installation plan tied to existing hardware. Check the listed JK year and 4WD restriction before choosing it.

Skip it if you need a shock set for a different vehicle or lift range; this package is specifically listed for 2007–2015 Wrangler JK 4WDs.

A Jeep Wrangler JK 4WD owner with a 3–4-inch lift at both ends gets a matched four-shock package and included hardware here. Its fit boundary is specific: the listing names 2007–2015 models and compatible Rancho systems.

Listed on Amazon as: Rancho RS5000X Gas Shocks set compatible with 07-15 Jeep Wrangler JK with 3-4" lift kits

#5

5. Freedom Off-Road Nitro Shocks

• Compatible with Vehicle Type: Jeep
• Material Type: Alloy Steel

Best for: Jeep JK bolt-on shock buyers.

Why it ranks #5: The four-shock set is designed for 2–4-inch lifts on 2007–2018 Jeep Wrangler JK, and lists nitrogen charging and a 40mm piston.

Easy bolt-on installation is a named feature of this Freedom Offroad four-shock set for 2007–2018 Jeep Wrangler JKs with 2–4-inch lifts. High-pressure nitrogen charging and a 40mm piston distinguish the set, while hardened rubber bushings are specified for its mounting points.

The four-shock package provides front and rear coverage for the stated JK application, avoiding the need to source separate front and rear pairs for a complete replacement. Its 2–4-inch lift range is broader at the lower end than a set limited to a four-inch lift, while the 40mm piston and chromed hardened piston rod identify its construction. Hardened rubber bushings and the listed easy bolt-on installation support a straightforward mounting workflow. The supplied fit is specific to 2007–2018 Wrangler JKs.

Skip it if you need shocks for a vehicle other than a 2007–2018 Wrangler JK; this set’s stated application is Jeep-specific.

A 2007–2018 Jeep Wrangler JK owner with a 2–4-inch lift gets four shocks, nitrogen charging, and listed bolt-on installation. Keep the vehicle-generation and lift-range boundaries in view when selecting it.

Listed on Amazon as: Freedom Off-Road Nitro Shocks for 2-4" Lift for 07-18 Jeep Wrangler JK

#6

6. Freedom Off-Road Nitro Shocks

• Compatible with Vehicle Type: Truck
• Material Type: Metal, Rubber

Best for: Older 4WD Silverado owners.

Why it ranks #6: A complete front-and-rear set is designed for 4–6-inch lifts on 1988–1998 Silverado/Sierra, but is specified for 4×4 only.

A four-shock package specified for 4–6-inch lifts gives this Freedom Offroad Nitro set coverage at both ends of listed 1988–1998 Silverado and Sierra trucks. Its stated 4X4-only application makes drivetrain an important fit boundary for owners choosing replacement shocks.

The package includes two front and two rear shocks, so one set addresses all four corners rather than just a single axle. Its 4–6-inch lift specification narrows the intended suspension setup, while the 4X4-only note rules out two-wheel-drive applications. The supplied details identify metal and rubber materials and a powder-coated silver finish, but do not describe damping construction or included mounting hardware. Confirm the listed model generation and four-wheel-drive requirement when planning installation.

Skip it if you have a two-wheel-drive truck or need shocks for a different lift range; this set is listed for 4X4 vehicles and 4–6-inch lifts.

A 1988–1998 Silverado or Sierra 4X4 owner with a 4–6-inch lift can use this set to replace shocks at both ends. Its stated 4X4-only fit excludes two-wheel-drive trucks.

Listed on Amazon as: Freedom Off-Road Nitro Shocks for 4-6" Lift for 88-98 Silverado/Sierra

#7

7. Bilstein 5100 Monotube Shocks

• Compatible with Vehicle Type: Truck
• Material Type: Metal
• Weight: 22.4 lb

Best for: Four-inch F-250 lift drivers.

Why it ranks #7: The title specifies a 4-inch-lift F250 4WD set, but its description also calls the shocks a direct-fit upgrade for stock-height vehicles.

A monotube design is the defining feature of this Bilstein 5100 set for 2005–2016 Ford F-250 4WD trucks with a 4-inch lift. Bilstein says the construction provides consistent, fade-free performance, a useful consideration for drivers moving between road and off-road conditions.

Bilstein describes the 5100 as combining off-road dependability with smooth on-road driving, so it addresses mixed-use truck owners rather than a single surface. Its monotube construction is specifically associated with consistent, fade-free performance. The listing identifies a 4-inch-lift F-250 4WD application, while the additional description also calls the shocks direct-fit upgrades to original-equipment shocks on stock-height light trucks and SUVs. Because those fit descriptions differ, check the application details carefully before installation.

Skip it if you need an unambiguous lift-specific fit description; the supplied details also describe a stock-height direct-fit application.

Consider this set if you own a listed 2005–2016 F-250 4WD and value monotube construction for mixed on-road and off-road driving. Resolve the listing’s conflicting lift and stock-height fit wording before proceeding.

Listed on Amazon as: Bilstein 5100 Monotube Gas Shock Set for 05-16 Ford F250 4WD with 4in Lift

#8

8. Rough Country N3 Front Shocks

• Compatible with Vehicle Type: Truck
• Material Type: Alloy Steel, Aluminum, Rubber, Zinc
• Weight: 8.4 lb

Best for: Heavy-duty front shock buyers.

Why it ranks #8: This front pair fits 2001–2010 Silverado/Sierra 2500HD/3500HD with 0–4-inch lift, but does not replace rear shocks.

Ten-stage variable valving gives these Rough Country N3 front shocks a specified way to balance highway comfort with control on rough terrain and jobsite conditions. The pair is listed for 2001–2010 Chevy Silverado and GMC Sierra 2500HD/3500HD models with suspension lifts from zero to four inches.

High-pressure nitrogen charging and a 54mm shock body are described as supporting cooling and fade-resistant damping, a practical pairing for heavy-duty truck use. The 10-stage variable valving targets both smooth highway travel and rougher work or off-road conditions. This package contains two front shocks, not a complete front-and-rear set, so buyers replacing all four corners need another rear solution. The stated application covers a broad 0–4-inch lift range on the named truck models.

Skip it if you need a complete four-corner replacement in one package; these are front shocks only.

Choose this pair if your listed heavy-duty Chevy or GMC needs front shocks and its suspension lift falls within 0–4 inches. It does not supply rear shocks, so plan separately for the back of the truck.

Listed on Amazon as: Rough Country N3 Front Shocks for Chevy Silverado & GMC Sierra 2500 HD/3500 HD (2001-2010) – Fits 0–4" Lifted Suspension, Nitrogen Charged Shock Absorbers, Pair

#9

9. Rancho RS5000X Rear Pair

• Compatible with Vehicle Type: Truck
• Material Type: Metal
• Weight: 12 lb

Best for: Sierra 1500 rear replacements.

Why it ranks #9: The rear pair is specified for 4–6-inch lifts on applicable 2007–2018 Sierra 1500 models; it excludes HD and Classic models.

A rear pair specified for 4–6-inch lifts makes the Rancho RS5000X a focused replacement choice for listed 2007–2018 GMC Sierra 1500 models. The shocks fit 2WD and 4WD applications, with supplied washers, bushings, and nuts for installation using factory mounting bolts.

Rancho’s patented rebound valving and advanced compression phase are intended to support handling and performance, while the stated extended length targets lifted rear suspensions. The package is limited to two rear shocks, which suits a rear-only replacement but not a full four-corner refresh. Its application notes add important boundaries: models with front struts only are specified, Classic Silverado/Sierra 1500 models and HD models are excluded. Included hardware and reused factory bolts simplify the listed mounting approach.

Skip it if you own a Classic Silverado or Sierra 1500, an HD model, or need front shocks in the same package.

This rear pair suits a non-Classic 2007–2018 GMC Sierra 1500 with the specified 4–6-inch rear lift and listed 2WD or 4WD fit. It is not a complete set, and HD models are excluded.

Listed on Amazon as: Rancho RS5000X Shocks Rear Pair for 07-18 GMC Sierra 1500 4WD RWD w/4-6" lift

#10

10. Rough Country N3 Rear Shocks

• Compatible with Vehicle Type: 1999-2004 4WD Chevy Silverado
• Material Type: Rubber
• Weight: 14 lb

Best for: 2500 HD rear lift setups.

Why it ranks #10: These are rear-only shocks with a 3.5–7.5-inch lift range for Chevy/GMC 2500 HD, so they do not provide a complete set.

A stated 3.5–7.5-inch lift range makes these Rough Country N3 shocks a broad-range rear option for listed 2001–2024 Chevy/GMC 2500 HD applications. The package contains two rear shocks, with nitrogen charging and 10-stage variable valving among its specified features.

The nitrogen-charged design and 54mm fast-cooling shock body are presented as supporting performance, while 10-stage variable valving targets a blend of highway and off-road ride behavior. Military fluid is rated to temperatures listed as -50 degrees C in the features; another supplied note says -40 degrees C, so the exact rating is inconsistent. Rubber bushings and a spring-loaded piston rod seal are also specified. This is a rear pair, not a complete four-corner package.

Skip it if you need a single, consistent stated temperature rating for the shock fluid; the supplied details give both -50°C and -40°C.

This rear pair suits a listed Chevy/GMC 2500 HD owner whose lift falls within 3.5–7.5 inches and who wants N3 valving. It covers the rear axle only, and its fluid temperature ratings are inconsistent.

Listed on Amazon as: Rough Country 3.5-7.5" N3 Rear Shock Absorbers for 01-24 Chevy/GMC 2500 HD – 23153_F