Best Slide Out Motor For RV: In-Wall and Through-Frame Options

#1 · Best Overall

1. Lippert 287298 Motor

• Voltage: 12 V
• Weight: 1.6 lb

Best for: Genuine Schwintek replacements.

Why it ranks #1: A genuine 12-volt, 500:1 high-torque motor assembly specifically for in-wall slide-outs, with an exact-match replacement designation.

Lippert’s genuine 500:1 high-torque motor assembly is the defining feature of this 287298 replacement, enabling owners of compatible in-wall slides to match the named component directly. The 12-volt specification and motor-only contents clarify the electrical rating and the scope of the part before installation planning.

Lippert identifies this as a genuine replacement component specifically for in-wall slide-outs, which helps distinguish it from through-frame actuator assemblies. Its 500:1 ratio and 12-volt rating provide two important comparison points against the existing motor. The included component is the motor assembly only, so buyers needing a complete slide mechanism must account for that boundary. Lippert also describes the part as an exact-match component and suitable for DIY installation, supporting a focused replacement workflow when the model matches.

Skip it if you need a 300:1 IG-42 motor; FHRHRY’s 236575 assembly lists that ratio for its Schwintek application.

This Lippert 287298 suits owners matching a 500:1 in-wall motor and wanting a genuine replacement component. Its 12-volt rating aids comparison, but it is the motor assembly only, not the complete slide-out mechanism.

Listed on Amazon as: Lippert Replacement 500:1 In-Wall Slide-Out Motor Assembly, High Torque, Replacement motor for In-Wall Slide-Outs, Easy, DIY installation, Exact-Match Component – 287298

#2 · 300:1 Gear Ratio

2. FHRHRY 236575 Motor

• Voltage: 12 V DC
• Material Type: Rubber

Best for: Schwintek 236575 replacements.

Why it ranks #2: The 12-volt IG-42, 10mm in-wall motor lists a 300:1 gear ratio and a 3-year warranty; verify your model and part number.

The 300:1 gear ratio is the defining feature of FHRHRY’s 12-volt IG-42 motor, giving owners of compatible Lippert Schwintek in-wall slides a specifically identified replacement assembly. Its 236575 model designation helps narrow the search to the matching motor rather than a through-frame or cable-slide component.

This assembly is listed for the Lippert Schwintek in-wall slide system and uses the IG-42, 10 mm motor specification, so those identifiers give owners concrete checkpoints when matching a failed motor. The 12-volt rating suits a 12-volt replacement application, while the 300:1 ratio identifies its high-torque configuration. At 5.31 inches wide and 1.65 inches high, its stated dimensions can also inform space checks during a replacement; the listing advises checking model and part number carefully.

Skip it if you need a BAL Accu-Slide cable motor; Sunluway’s 225008 motor and gear housing is listed for that system instead.

Choose this FHRHRY motor when replacing a 236575 IG-42 unit in a compatible Schwintek in-wall slide. Its 12-volt, 300:1 specification is useful for matching, but confirm the motor and part number before installation.

Listed on Amazon as: 236575, RV in-Wall Slide-Out Motor Compatible with Lippert Schwintek in-Wall Slide System, IG-42 10mm Motor Assembly, Slide Motor for Travel Trailer and Camper | 300:1 High Torque Gear Ratio, 12V

#3 · Two-Motor Set

3. kalageen 287298 Motor

Best for: Paired Schwintek 500:1 motors.

Why it ranks #3: This listing supplies two 287298 motors with a 500:1 ratio for compatible Lippert Schwintek in-wall systems.

The 500:1 gear ratio defines these two kalageen 287298 motors, giving Schwintek in-wall owners a paired replacement option for systems specified around that ratio. The listing names Lippert LCI compatibility and describes the motors as factory tested, helping buyers identify both the system family and the intended motor configuration.

These motors are listed for Lippert LCI Schwintek in-wall slides and specifically replace 500:1 motors, so both system type and ratio matter when matching a repair. The two-unit listing can suit an installation requiring a pair of matching motors. Kalageen also describes factory testing and OEM-level requirements, while the 287298 model identifier offers another check against the existing component. The supplied information does not state a voltage, so buyers should rely on the listed model and system compatibility rather than infer an electrical rating.

Skip it if you need a genuine Lippert single motor assembly; Lippert’s 287298 replacement is explicitly identified as its in-wall component.

This kalageen set suits owners replacing matching 500:1 motors in a Lippert LCI Schwintek in-wall slide, especially when two units are needed. Verify the existing ratio and model; the supplied details do not state voltage.

Listed on Amazon as: 2 pcs 287298 RV in-Wall Slide-Out Motor (OEM), 500:1 High Torque Gear Ratio

#4 · Motor and Actuator

4. Lippert 168956 Assembly

• Voltage: 12 V
• Weight: 21.3 lb

Best for: Genuine through-frame assemblies.

Why it ranks #4: A genuine 12-volt, 18:1 Venture through-frame replacement that includes both actuator and motor, rather than a motor alone.

A genuine Lippert actuator and motor together are the defining feature of this 168956 replacement, enabling owners of compatible Venture through-frame slides to source both listed components as one assembly. Its 12-volt, 18:1 configuration and 30-amp rating provide specific checkpoints for matching the original slide-out system.

Because the included components are the actuator and motor, this assembly can address a replacement need that calls for both rather than a motor alone. Lippert identifies it as a genuine component for through-frame slide-outs and lists 12-volt operation, an 18:1 ratio, 30 amps, and 9,500 RPM. Those details help owners compare the assembly with the existing setup, while the through-frame designation draws a clear boundary against in-wall slide applications.

Skip it if you need only a Schwintek in-wall motor; Lippert’s 287298 is its listed 500:1 in-wall replacement.

This Lippert assembly suits owners matching a 168956 through-frame application who need both actuator and motor. Its detailed electrical and speed specifications aid comparison, but the through-frame format is not a substitute for an in-wall motor.

Listed on Amazon as: Lippert 12-Volt DC Replacement 18:1 Venture Through-Frame Slide-Out Motor Assembly with High-Speed Actuator, 30 Amps, 9,500 RPM – 168956

#5

5. NOVOPARTS M-8910 Motor

• Voltage: 12 V
• Material Type: Aluminum

Best for: M-8910 motor replacements.

Why it ranks #5: Its 12-volt, 30-amp motor has an 18:1 ratio and lists M-8910, 132682, 295380, and RP-785615 replacement numbers.

The stated 5,800 RPM motor speed sets NOVOPARTS’ M-8910 replacement apart with a concrete operating figure, alongside its 18:1 gear ratio and 30-amp rating. Those specifications help through-frame slide owners compare the replacement with an existing 12-volt motor carrying one of the listed part numbers.

This aluminum motor is listed at 12 volts, 30 amps, 5,800 RPM, and an 18:1 gear ratio, giving buyers several measurable points for matching an existing assembly. Its named references—M-8910, 132682, 295380, and RP-785615—help narrow the replacement search to the stated motor family. The base dimensions of 6 1/4 by 3 1/2 inches and height of 6 1/2 inches can inform mounting-space checks, though the listing does not identify an actuator as included.

Skip it if you need the actuator included with the motor; Lippert’s 168956 listing includes both for a through-frame slide.

This NOVOPARTS unit suits buyers matching an M-8910-family 12-volt motor and needing its stated speed, ratio, and dimensions for comparison. The listing identifies the motor itself, so account for the actuator separately if your repair requires one.

Listed on Amazon as: RV Slide Out Motor 18:1 Ratio M-8910 30 Amp 12 Volt Slide Out Replace 132682, 295380, RP-785615, 131903, Replace RV Slideout Motors

#6

6. BELKEBIR Actuator Motor

• Weight: 2.1 kg

Best for: Through-frame actuator replacements.

Why it ranks #6: The 12-volt, 30-amp, 18:1 actuator motor lists several Venture and Lippert replacement numbers, including RP-785615 and M-8910.

The 18:1 gear ratio paired with a 30-amp, 12-volt motor defines BELKEBIR’s actuator replacement, enabling owners to target specified Lippert through-frame slide systems. Its listed replacement references include RP-785615, 132682, 168956, 295380, and M-8910, giving buyers concrete identifiers for checking the existing component.

BELKEBIR lists this motor for Venture/Tuson through-frame slide-out systems and names several replacement references, so the system style and current part number are key fit checks. The 12-volt DC rating and 30-amp specification help match the motor’s electrical requirements, while the 18:1 reduction identifies its gearing. The description also cites 2 x 2 or 2.5 x 2.5 Lippert actuator motor formats, which can help narrow the application before a replacement is selected.

Skip it if you need a genuine actuator-and-motor assembly; Lippert’s 168956 includes both components for through-frame slides.

Choose this BELKEBIR motor when replacing a listed Venture/Tuson through-frame actuator motor with matching electrical and gear specifications. Its named references help identify the application, but the listing does not make it an in-wall slide replacement.

Listed on Amazon as: RV Actuator Slide Out Motor Compatible with Lippert | 12V DC 30A 18:1 Gear Ratio | Replacement for Venture/Tuson Through-Frame Slide Out Systems Replaces Rp-785615, 132682, 168956, 295380, M-8910

#7

7. FHRHRY Power Gear Motor

• Voltage: 12 V DC
• Material Type: Aluminum

Best for: Power Gear motor matching.

Why it ranks #7: This 12-volt, dual-shaft Power Gear motor lists a 131:1 ratio and numerous replacement numbers, but requires an exact part match.

Its stated 9 RPM at 850 in-lbs gives this FHRHRY Power Gear motor a concrete high-load operating specification, helping owners compare replacement requirements beyond the model number. The 12-volt, aluminum, dual-shaft assembly is listed against a broad set of Power Gear references, making part-number matching central to choosing it.

This 523900 motor is listed for Power Gear slide-out applications and includes numerous replacement references, so checking the existing motor’s number can narrow compatibility before installation. Its dual-shaft, in-wall format identifies the intended assembly style, while the aluminum construction specifies the housing material. The performance figures distinguish operating conditions: 9 RPM at 850 in-lbs, 12 RPM at 400 in-lbs, and 14 RPM with no load. Those figures help buyers compare their replacement needs with the listed motor.

Skip it if you need a Lippert Schwintek 500:1 in-wall motor; Lippert’s 287298 assembly is listed for that application.

This FHRHRY unit suits owners matching a listed Power Gear reference who want the dual-shaft motor and its stated load-speed figures. Check the existing part number and in-wall configuration; the extensive reference list still requires an exact match.

Listed on Amazon as: RV Power Gear Slide Out Motor, Motorhome Replacement Gearbox Motor | in-wall Dual Shaft, 131:1 Gear Ratio, 12V DC, Replace# 523900 522967 523143 523983 521976 523529 524327 K01265B300 K01469B300 etc.

#8

8. kalageen 236575 Motors

• Weight: 1.56 kg
• Material Type: Metal

Best for: Two-motor IG-42 replacements.

Why it ranks #8: A two-motor 236575 listing for an IG-42, 10mm in-wall assembly; confirm that this part number matches the existing motor.

A two-motor set is the defining feature of kalageen’s 236575 IG-42 replacement listing, giving owners who need two matching in-wall motors a paired option. The listing identifies the assembly as a 10 mm motor and describes factory testing, making the model and shaft specification useful checkpoints for replacement planning.

The 236575 and IG-42 identifiers point this set toward matching in-wall slide motor replacements, while the 10 mm specification helps distinguish it from differently sized motor assemblies. Having two motors in the listing suits a repair that calls for a pair, rather than sourcing each unit separately. The manufacturer describes the motors as factory tested and made of metal; those facts inform the component selection, though the supplied details do not identify a voltage or gear ratio.

Skip it if you need a stated 12-volt motor and 300:1 ratio; FHRHRY’s 236575 IG-42 motor lists both specifications.

This kalageen set suits owners matching an IG-42, 10 mm 236575 in-wall motor and needing two units for the repair. Check that the listing’s stated identifiers match your installation; voltage and gear ratio are not specified here.

Listed on Amazon as: 2pcs 236575 RV in-Wall Slide-Out Motor, IG-42 (10mm) Motor Assembly

#9

9. Sunluway 225008 Assembly

• Voltage: 12 V
• Weight: 3.2 kg

Best for: BAL Accu-Slide cable repairs.

Why it ranks #9: The 12-volt motor and gear housing is listed for BAL Accu-Slide and replacement numbers R25076-1, R25076, and R25075.

The combined motor and gear housing is the key feature of Sunluway’s 225008 replacement, giving owners of BAL Accu-Slide cable systems both named components in one assembly. Its listing also identifies 12-volt operation and compatibility with specified R25076 and R25075 replacement references, helping buyers focus their parts match.

For owners of BAL Accu-Slide cable slides, the 225008 motor and gear housing is listed as a replacement for the R25076-1 gearbox and R25075 side motor. That combined assembly can simplify identifying the relevant replacement component when both motor and housing are part of the repair. Its 12-volt specification supports matching to the stated electrical system, and Sunluway describes the high-torque motor as offering quiet operation; the system type remains the central fit boundary.

Skip it if you have a Schwintek in-wall slide; FHRHRY’s 236575 IG-42 motor is listed for that system.

Choose the Sunluway 225008 when your repair is on a BAL Accu-Slide cable system and calls for the motor-and-gear-housing assembly. Its 12-volt rating and named replacement references help with matching, but it is not an in-wall motor.

Listed on Amazon as: 225008 RV Slide Out Motor & Gear Housing for BAL Accu-Slide Cable Slide Out System, Replace for ‎R25076-1 Gearbox R25076 RV Slide Out Gearbox and R25075 RV Side Motor

#10

10. ATRACYPART 225008 Gearbox

• Voltage: 12 V
• Weight: 6.9 lb
• Material Type: Alloy Steel

Best for: Accu-Slide gearbox replacements.

Why it ranks #10: This 12-volt BAL Accu-Slide motor and gearbox lists a 3/16-inch drive and 13-tooth sprocket; confirm the specified replacement numbers.

The 13-tooth sprocket with a 3/16-inch drive is the defining detail of ATRACYPART’s 225008 motor and gearbox housing, giving BAL Accu-Slide owners specific hardware to match. The listing also identifies 12-volt operation and replacement references including R25076-1 and R25074, supporting a targeted parts search.

ATRACYPART lists this motor and gearbox housing for the 225008 Accu-Slide application and names R25076-1 and R25074 among its replacement references. The 3/16-inch drive and 13-tooth sprocket offer useful mechanical matching points, while the 12-volt rating helps owners compare electrical requirements. Its alloy-steel material is specified for the housing, and the seller describes factory testing. Together, these details help focus selection on the cable-slide gear assembly rather than a general in-wall motor.

Skip it if you need a Schwintek in-wall replacement; Lippert’s 287298 is listed as a 500:1 in-wall motor assembly.

Choose this ATRACYPART unit when matching a 225008 Accu-Slide motor and gearbox housing, particularly where the drive and sprocket details matter. Confirm the existing cable-slide references; its gearbox format does not suit an in-wall motor replacement.

Listed on Amazon as: RV Slide Out Gearbox Housing R25076 R25075 225008 Accu Slideout PMDC Motor | 3/16 Drive High Output 13-Tooth Sprocket | Replaces R25076-1 R25074 64ZY-CJ001-039