Best Snow Tracks For 4 Wheeler: Compare Rear Track Kits

#1 · Best Overall

1. WPHMOTO Rear Track Assembly

• Material Type: Alloy
• Compatible with Vehicle Type: ATV, UTV, Golf Cart, Snowmobile, Beach…
• Size: 23T

Best for: Measured 23T rear pair.

Why it ranks #1: States 23T, 460 × 120 × 300 mm dimensions, rear left-and-right placement, and a pair, giving buyers useful fitment details.

A stated 460 × 120 × 300 mm size and 23T sprocket make this WPHMOTO pair unusually straightforward to assess for a compatible rear-axle conversion. Its listing spans ATVs, UTVs, golf carts, snowmobiles, and other named vehicles, with winter travel and mountain terrain as intended uses.

The left-and-right rear pair supplies both sides of the assembly, while the listed 23T sprocket gives buyers a specific drive-interface detail to compare. Stated dimensions of 460 × 120 × 300 mm support a more concrete size check before installation. Alloy and metal are named materials, and the description connects the setup with snow travel and mountain terrain. Compatibility also explicitly includes golf carts and snowmobiles, alongside ATVs and UTVs, providing a broad set of named vehicle applications.

Skip it if you need the listed 85 × 24.5 mm mounting-hole spacer; 91.SCS Snowmobile Rear Axle Track Assembly provides that detail.

A good match for buyers who want a measured rear pair for winter travel or mountain terrain on a listed vehicle. Check that the 23T interface and stated dimensions suit the intended rear-axle setup.

Listed on Amazon as: Rear Wheel Snow Sand Snowmobile, 4 Wheeled Sand Snowmobiles, ATV Snow Sand Tracks for UTV ATV Mower 4-Wheeler Buggy Go Kart Buggy Quad

#2 · Clear Dimensions

2. ZXTDR Rear Track Assembly

• Material Type: Rubber
• Compatible with Vehicle Type: ATV, Snowmobile, UTV
• Size: 46 centimeters

Best for: Rear-axle winter conversion.

Why it ranks #2: Lists a 23T sprocket, 460 × 120 × 300 mm track size, rear placement, and two snowmobile wheels for ATV and UTV use.

A 23-tooth rear track assembly with rotating wheel joints gives this ZXTDR pair a defined route to winter traction on a compatible ATV, UTV, or quad. Its triangular wheel layout is described as supporting steady, safe driving, while the listed 460 × 120 × 300 mm dimensions help buyers assess the assembly's size.

The pair includes left and right rear assemblies, so it addresses both sides of a rear-axle conversion rather than supplying a single wheel. The 23T sprocket and rotating joints between the wheels and pole support power transfer and movement through the track assembly; the stated benefit is steadier driving. Alloy and metal construction is listed alongside rubber material, and the 460 × 120 × 300 mm size gives a concrete starting point for checking whether the setup suits the vehicle.

Skip it if you need a stated 23T fitment detail for a broader vehicle list; WPHMOTO TL404 also names golf carts and snowmobiles.

A practical candidate for ATV or UTV owners seeking a paired rear track assembly for winter travel, with listed dimensions and a 23T sprocket. The rear-placement specification and vehicle compatibility still need to match the intended setup.

Listed on Amazon as: Rear ATV Snowmobile Rubber Track Snow Sand for ATV UTV Quad Mower 4-Wheeler Buggy Go Kart

#3 · Spline-Specific Pair

3. 91.SCS 23T Track Assembly

• Material Type: Nylon
• Compatible with Vehicle Type: ATV, Go Kart, UTV
• Size: 16×8-7, 16x8x7, 200/55-7, 16×8.00-7

Best for: 23T spline replacement pair.

Why it ranks #3: Includes left and right rear assemblies and specifies a 23T spline for ATV, UTV, and go-kart applications.

A stated 23-tooth spline interface is the key detail on this 91.SCS left-and-right rear track pair, enabling a more specific fitment check for compatible rear axles. The listing targets snow, sand, mud, and loose terrain, with metal construction presented for demanding winter and off-road use.

Because the package includes left and right assemblies intended to replace standard rear wheels, buyers can assess it as a paired rear conversion rather than a single-side component. The 23T spline is described as supporting secure power transfer, a useful interface detail when matching the assembly to a vehicle. Metal construction is associated with durability and load capacity in harsh conditions, while the stated terrain range includes snow, sand, mud, and loose ground. Listed vehicle types include ATVs, go-karts, and UTVs.

Skip it if you need golf-cart compatibility explicitly listed; WPHMOTO TL404 names golf carts among its compatible vehicle types.

A sensible fit for owners of compatible ATV, go-kart, or UTV rear axles who need a paired assembly and a specified 23T interface. Its listed compatibility is narrower than some broader multi-vehicle listings.

Listed on Amazon as: 2x 23T Left & Right Snow Sand Track Wheel Assembly for Go Kart Rear Axle Tracks ATV UTV Quad Lawn Mower Golf Cart Drift Trike Mini Bike Snowmobile Four Wheeler Karting Racing Carts

#4

4. 91.SCS Heavy Duty Assembly

• Material Type: Nylon
• Compatible with Vehicle Type: ATV, Go Kart, UTV
• Size: 16×8-7, 16x8x7, 200/55-7, 16×8.00-7

Best for: Multi-terrain rear-track pair.

Why it ranks #4: Offers a pair of rear assemblies and stated 460 × 120 × 300 mm dimensions, with ATV and UTV among its listed vehicle types.

Heavy-duty construction paired with snow, sand, gravel, and turf use gives this 91.SCS assembly a wider stated terrain brief than snow alone. Its 460 × 120 × 300 mm tracks and 85 × 24.5 mm mounting-hole spacer provide concrete sizing details for buyers planning a rear-wheel conversion.

The pair is presented for a broad set of machines, from ATVs and UTVs to go-karts, lawn mowers, and mini bikes, making it relevant when one track format must serve varied utility or recreational vehicles. Its listed dimensions and mounting-hole spacer help frame the fit-checking workflow before installation. Heavy-duty construction is tied to stability and strength across snow, sand, gravel, and turf, although the listing does not specify a spline count for the drive interface.

Skip it if you require a stated 23T spline; 91.SCS SCSTL404 explicitly lists a 23-tooth rear-axle interface.

This suits buyers who want a heavy-duty rear pair for mixed snow, sand, gravel, or turf use across the listed vehicle types. The missing spline-count detail makes interface verification especially important before choosing it.

Listed on Amazon as: Pair of Heavy Duty Snow & Sand Track Wheel Assemblies for Go Kart, ATV, UTV, Drift Trike, Golf Cart, Lawn Mower, Mini Bike, Snowmobile, Quad, 4 Wheeler

#5 · Material Mix

5. Jelquix 23T Snow Tracks

• Material Type: Alloy+Metal+ABS
• Size: #711

Best for: Rear conversion for varied terrain.

Why it ranks #5: Specifies 23 teeth, rear left-and-right installation, Alloy, Metal, and ABS construction, and a two-track package.

A 23-tooth rear sprocket and a two-track package make the Jelquix kit a defined option for compatible ATVs, UTVs, mowers, and four-wheelers. Alloy, metal, and ABS are listed in its construction, while the stated winter and mountain-terrain uses extend its role beyond snow travel alone.

The package lists two tracks for rear, left-and-right installation, supporting a paired conversion workflow rather than a one-sided replacement. Its 23-teeth sprocket gives buyers a specific interface detail to compare against their rear axle. The listed alloy, metal, and ABS materials describe the construction, while the fitment list covers UTVs, ATVs, mowers, four-wheelers, go-karts, and quads. The product description connects the setup with improved maneuverability in snow and use on mountainous terrain.

Skip it if you need measured track dimensions before evaluating fit; WPHMOTO TL404 lists a 460 × 120 × 300 mm assembly.

This is aimed at owners of listed utility and recreational vehicles seeking a paired rear conversion for snow or mountain terrain. The 23-tooth interface is useful, but the supplied facts leave dimensions unstated.

Listed on Amazon as: ATV Snow Tracks, 23 Teeth Spline ATV Electric Snowmobile Tracks with Rugged Construction & Long Lifespan, Suitable for UTV Mower 4 Wheelers Quad

#6

6. VELATEMOR ATV Snow Tracks

• Material Type: Alloy+Metal+ABS
• Size: #711

Best for: Deep-snow flotation focus.

Why it ranks #6: Names a 23-tooth spline and Alloy, Metal, and ABS construction, with compatibility claims covering ATVs, UTVs, and four-wheelers.

Expanded track surface area is the defining promise of this VELATEMOR rear kit, enabling improved flotation intended to reduce sinking in deep snow. Its 23-tooth spline drive is another practical identifier, while the listing also describes use on mud and mountainous terrain for compatible ATVs and UTVs.

The larger contact area is described as helping the vehicle float over deep snow rather than sink, which targets winter travel where ordinary tires struggle. A 23-tooth spline drive is specified for the rear-wheel assembly, giving buyers a concrete drivetrain interface to compare with their vehicle. The listing also names mud and mountainous terrain, and its compatibility claims include ATVs, go-karts, UTVs, off-road vehicles, and four-wheelers. No assembly dimensions are supplied in the provided facts.

Skip it if you need stated 460 × 120 × 300 mm dimensions; WPHMOTO TL404 supplies those measurements for its rear pair.

Consider this for a compatible ATV or UTV used in deep snow, mud, or mountainous terrain, especially when flotation is the priority. Buyers who need a stated track size will have less fitment information here.

Listed on Amazon as: ATV Snow Tracks, 23 Tooth Spline ATV Rear Wheel Tracks for UTV Mower Go Kart Quad, Electric Snowmobile for 4 Wheelers Off Road Vehicle

#7

7. Aumotop 23T Rear Tracks

• Material Type: Alloy+Metal+ABS

Best for: 23T all-terrain rear kit.

Why it ranks #7: Lists a 23-tooth spline, rear left-and-right installation, and a two-track package for ATVs, UTVs, and four-wheelers.

A 23-tooth spline connection is the central practical detail of this Aumotop rear-track kit, enabling a targeted compatibility check for an ATV, go-kart, UTV, or four-wheeler. Alloy, metal, and ABS construction is listed, with snow and broader off-road use as its intended terrain range.

The package is described as two tracks for rear, left-and-right installation, framing the product as a paired conversion for the vehicle's back end. Its 23T spline is presented as a secure attachment point, helping buyers focus on the axle interface during fitment planning. Alloy, metal, and ABS are the named materials, and the listing calls out winter maneuverability and all-terrain capability. Listed fitment also includes mowers and quads, though no track dimensions are provided in the supplied facts.

Skip it if you need measured 460 × 120 × 300 mm tracks; WPHMOTO TL404 includes those dimensions in its listing.

This suits buyers seeking a paired, 23T rear-track setup for one of its listed vehicle types and winter or off-road use. The spline detail is clear, but the supplied facts omit dimensions for size comparison.

Listed on Amazon as: Off Road Vehicle Rear Wheel Track Sturdy 23 Teeth Spline ATV Snow Tracks for 4 Wheelers, Go Kart Rear Wheel Track

#8 · Longer Axle Kit

8. Arligaaduo 23.6-Inch Kit

Best for: Stabilizing triangle-track kit.

Why it ranks #8: Lists 23.6-inch rear axle tracks and describes an iron axle, cast-iron brake disc, and aluminum-alloy sprocket for several vehicle types.

Three internal gears form a stabilizing triangle structure in this Arligaaduo 23.6-inch rear track assembly, enabling the listing's claimed steadier driving on mud, sand, and mountain roads. Its left-and-right metal kit also specifies a 1.02-inch external-diameter iron rear axle for buyers assessing the assembly's hardware.

The 23.6-inch track assembly uses three internal gears arranged as a triangle, a configuration the listing links to more stable driving on uneven terrain. A 1.02-inch external-diameter iron rear axle and gray cast-iron brake disc provide additional hardware details for planning the rear installation. The aluminum-alloy sprocket has a heat-treatment process, while sealed bearings and high-strength alloy steel are described as resisting corrosion and impact. The complete bolt-on kit is listed for ATVs, UTVs, go-karts, and more.

Skip it if you need a stated 23T spline interface; Aumotop Aumotopdm5iv1jkoc explicitly lists a 23-tooth design.

This is for buyers seeking a detailed rear-axle kit for mud, sand, or mountain-road use, with a triangle gear structure and specified axle hardware. The 1.02-inch axle diameter is a key fit consideration.

Listed on Amazon as: Snow Sand Track, 23.6" Rear Axle Tracks, Wheel Assembly, Left & Right Metal Track Kit for Go Kart ATV UTV Quad Dune Buggy Lawn Mower, 4 Wheeler Drift Trike, Golf Cart Mini Bike Snowmobile Snow Blower

#9

9. QuilxyzCart Rear Tracks

Best for: Snow-and-sand utility pair.

Why it ranks #9: Describes a two-piece rear snow-and-sand set for ATVs, UTVs, and four-wheelers, but provides fewer axle and size specifications.

Dual-purpose use across snow, sand, and loose terrain gives this QuilxyzCart pair a clear role for recreational and utility vehicles. The listing calls out rear-position replacement fit and metal construction, enabling buyers to consider it for ATVs, UTVs, go-karts, golf carts, buggies, and quads.

The stated rear-position fit frames this as a replacement for rear wheels, and the broad vehicle list helps buyers assess whether their machine falls within the intended use. Snow, sand, and loose terrain are the named operating surfaces, with traction and stability identified as the goals. Heavy-duty metal construction is presented for rough terrain and lasting use. The product facts do not give track dimensions or a spline count, so neither measurement can guide an initial axle-interface comparison.

Skip it if you need a specified 23T drive interface; 91.SCS SCSTL404 explicitly lists a 23-tooth spline.

A fit for buyers seeking a metal rear-track pair for listed vehicles on snow, sand, or loose ground. Its broad vehicle list is useful, but the supplied facts give no dimensions or spline count for comparison.

Listed on Amazon as: 2pcs Rear Wheel Snow & Sand Tracks for ATV, UTV, Go Kart, Golf Cart, Buggy, Quad & Snow Blower – Heavy Duty Metal Construction

#10

10. Kemblawolf Kart Track Kit

• Material Type: Metal
• Compatible with Vehicle Type: ATV, Go Kart, UTV, Buggy, Quad
• Size: Small (1:10 or 1:12 scale)

Best for: Small-scale karting setup.

Why it ranks #10: Claims 23T compatibility and metal construction, but its listed small 1:10 or 1:12 scale makes full-size 4-wheeler fitment unclear.

The stated small 1:10 or 1:12 scale is the defining boundary of this Kemblawolf kit, making it relevant to buyers evaluating a compact karting setup rather than assuming full-size ATV dimensions. Its metal construction and 23T spline compatibility are listed alongside snow, sand, and off-road use.

The scale specification matters first: the listing identifies the kit as small, at 1:10 or 1:12, so buyers should treat it as a scale-specific option rather than a general full-size conversion. A 23T spline is named for compatibility, while the metal construction is presented for rugged use. Snow-track design is intended to improve traction and control on snow, sand, and off-road terrain. The listing also gives versatile placement across front, rear, left, and right positions for compatible vehicles.

Skip it if you need a full-size 460 × 120 × 300 mm rear assembly; WPHMOTO TL404 lists those dimensions for its pair.

This is for buyers whose karting project matches the stated 1:10 or 1:12 scale and needs a 23T-compatible track kit. The scale is a decisive fit consideration, despite its broad terrain and placement claims.

Listed on Amazon as: Complete Karting Go Kart Track Kit Snow Sand Track Go Cart Tracks for UTV Buggy Quad Rear Wheel Kit ATV Electric Snowmobile Tracks 4 Wheeler Mower Golf Cart