Best Trailer Hitch For Dirt Bike: Compare 10 Hitch Carriers

#1 · Best Overall

1. Black Widow Aluminum Dirt Bike Carrier

• Load Capacity: 400 lb
• Material: Aluminum
• Compatible with Vehicle Type: Dirt Motorcycle

Best for: Long-ramp dirt-bike loading.

Why it ranks #1: Dirt-bike-specific fit for 2-inch Class III or IV receivers, a 400-pound capacity, and an extra-long six-foot ramp make loading more gradual.

The 6-foot ramp creates a gentler loading incline than a shorter track, helping reduce the effort of rolling a dirt bike onto this Black Widow carrier. The ramp locks onto the frame for storage, and the aluminum platform carries a single bike up to 400 pounds on a 2-inch Class III or IV receiver.

The extended ramp attaches to either side, which gives you a choice of loading approach, and its self-storing connection keeps the ramp with the carrier between uses. Compatibility with 2-inch Class III or IV receivers narrows the vehicle fit to those hitch specifications. The carrier supports wheels up to 5.5 inches wide, useful for many dirt-bike and fat-tire setups, while its 400-pound capacity remains the key weight limit.

Skip it if you need a listed capacity above 400 pounds; the VEVOR 600 LBS Aluminum Motorcycle Carrier provides a higher limit.

Pick this for a single dirt bike with tires no wider than 5.5 inches when a long ramp is central to your loading routine. It requires a 2-inch Class III or IV receiver and stays within 400 pounds.

Listed on Amazon as: Black Widow Aluminum Dirt Bike Hitch Carrier, 400 lb, Extra-Long 6 Ft Ramp

#2 · Best Strap Kit

2. Mockins 73-Inch Motorcycle Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Dirt Motorcycle, Truck

Best for: One-person ramp loading.

Why it ranks #2: This 500-pound steel carrier explicitly fits dirt bikes and includes a 47-inch ramp, hitch stabilizer, four ratchet straps, and four loop straps.

An integrated 47-inch ramp on this 73-inch Mockins carrier supports one-person loading, reducing the need to lift a dirt bike onto the platform. The 500-pound steel rack accommodates tracks up to 5.5 inches wide and includes both a hitch stabilizer and four ratchet and four loop straps for securing the setup.

The 73-inch carrier length and 5.5-inch track width are useful fit specifications for dirt bikes, dual-sport wheels, and fat tires within the listed dimensions. Its 47-inch ramp provides a loading path, while the stated 500-pound capacity defines the maximum load. A hitch stabilizer and eight included straps support installation and tie-down workflow; the carrier weighs 51 pounds. It is listed for dirt motorcycles and trucks, so receiver and vehicle setup remain relevant to the buyer.

Skip it if you want aluminum construction with a 600-pound rating; the VEVOR 600 LBS Aluminum Motorcycle Carrier matches that use.

Pick this for a dirt-bike owner who values the integrated ramp, included tie-downs, and a 500-pound limit. Its 5.5-inch tire-width specification and steel construction are the key fit and material considerations.

Listed on Amazon as: Mockins 500 Lbs. Capacity 73" Motorcycle Hitch Carrier with Loading Ramp

#3 · Highest Capacity

3. VEVOR 600 lb Steel Carrier

• Load Capacity: 600 lb
• Material: Q235B Steel
• Compatible with Vehicle Type: Car

Best for: High-capacity steel hauling.

Why it ranks #3: The 600-pound steel carrier has a 47-inch ramp and is described for scooter and dirt-bike hauling; its stated receiver size is 2 inches.

A 600-pound capacity gives this VEVOR steel carrier room for heavier motorcycles than a 400-pound-rated platform, while its 47-inch ramp provides a roll-on loading route. The 76-by-7-inch carrier deck offers a defined footprint for positioning a bike, with a recommended hitch installation height of 7.87 to 19.7 inches.

Q235B steel construction and the stated 600-pound limit support buyers prioritizing carrying capacity, while the included ratchet straps and stabilizer address securing the load and reducing carrier movement. The 47-inch ramp helps with loading without lifting the motorcycle onto the platform. Before installation, the vehicle’s hitch center hole should sit within the recommended 7.87-to-19.7-inch height range; the carrier itself weighs 61.7 pounds.

Skip it if you need an aluminum carrier; the VEVOR 600 LBS Aluminum Motorcycle Carrier uses aluminum construction.

This fits riders seeking a steel carrier with a 600-pound limit, ramp, straps, and stabilizer. Its installation height recommendation is an important boundary: the hitch center hole should be 7.87 to 19.7 inches from the ground.

Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Steel Motorcycle Carrier Hitch Mount with 47" Longer Ramp, Scooter Dirt Bike Trailer Hauler with Ratchet Straps and Stabilizer, for Car, Truck with 2" Hitch Receiver

#4 · Tilting Ramp

4. Mockins 83-Inch Tilting Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Car, Truck, Van

Best for: Tilting ramp and strap kit.

Why it ranks #4: Its 500-pound steel frame is 83 inches long, supports tires up to 5.5 inches wide, and includes a tilting ramp, stabilizer, hitch lock, and straps.

A tilting ramp is the defining feature of this 83-inch Mockins carrier, making mounting and dismounting the bike more convenient than loading onto a fixed platform. It supports up to 500 pounds and tires up to 5.5 inches wide, and its included ratchet and loop straps provide a complete securing setup.

The 83-by-6-inch steel frame fits 2-inch receivers and accommodates dirt bikes, scooters, eBikes, and other listed bike types within its 500-pound capacity and 5.5-inch tire-width limit. Tilting the ramp supports the loading workflow, while the included hitch stabilizer and hitch lock address carrier movement and connection security. Four heavy-duty ratchet straps and four loop straps give you multiple included tie-down components; the listed carrier weight is 75 pounds.

Skip it if you prefer a lighter listed carrier; the Mockins 73-inch carrier weighs 51 pounds.

Choose this for a rider who wants a tilting ramp and an extensive included tie-down kit for a bike within the 500-pound and 5.5-inch tire limits. Its 75-pound weight matters when handling the carrier.

Listed on Amazon as: Mockins 83" Tilting Motorcycle Hitch Carrier with Ramp w/ 500 Lbs. Capacity

#5

5. Goplus 600 lb Motorcycle Carrier

• Load Capacity: 600 lb
• Material: Steel
• Compatible with Vehicle Type: vehicle with 2" receiver

Best for: Wide-tire steel platform.

Why it ranks #5: A 600-pound steel carrier for a 2-inch receiver, it is described for dirt bikes and accommodates tires up to 7.5 inches wide.

A stated fit for tires up to 7.5 inches wide makes this Goplus carrier relevant to riders whose dirt-bike setup needs a broader track than many listed carriers provide. Its steel construction and 600-pound capacity support heavier loads, while the included loading ramp gives you a roll-on route to the hitch-mounted platform.

The 7.5-inch tire-width specification is the main fit distinction, helping buyers assess whether their wheel can sit on the track. A 600-pound load rating sets the maximum carrying limit, and the steel construction provides the carrier’s material basis. It fits vehicles with a 2-inch receiver and includes two straps and a loading ramp. The product advises not exceeding 55 mph while carrying a motorcycle, so transport speed is an explicit operating consideration.

Skip it if you need a higher listed transport-speed recommendation; the Goplus listing advises not exceeding 55 mph with a motorcycle loaded.

Consider this for a rider who needs the listed 7.5-inch tire fit and a 600-pound steel platform with ramp and straps. Its 55-mph recommendation is a meaningful boundary for highway travel.

Listed on Amazon as: Goplus Motorcycle Hitch Carrier, 600LBS Motorcycle Carrier Hitch Mount with 2 Straps, Loading Ramp, Dirt Bike Trailer, Heavy Duty Motor Cycle Rack, Fit Up to 7.5” Wide Tire

#6

6. ECOTRIC 500 lb Motorcycle Carrier

• Load Capacity: 500 lb
• Material: steel
• Compatible with Vehicle Type: Scooter, Trailer

Best for: Straightforward 500-pound hauler.

Why it ranks #6: This steel carrier is explicitly described for dirt bikes, has a 500-pound capacity, and measures 76 by 7 inches with a 38.5-inch ramp.

The 76-by-7-inch steel track and 500-pound capacity give this ECOTRIC a straightforward platform for transporting a dirt bike or scooter on a 2-inch receiver. Its 38.5-by-4.75-inch ramp provides a defined loading surface, while the 18-inch main hitch tube connects the carrier to the vehicle hitch.

ECOTRIC lists compatibility with 2-inch square receivers, including Class II, III, and IV, which helps narrow vehicle fit to the specified hitch size and classes. The 38.5-inch ramp supports rolling the bike onto the 76-inch-long, 7-inch-wide carrier, avoiding the need to place it directly on the deck by lifting. The steel construction and 500-pound rating set the material and load boundaries. A hitch pin is not included, so that connection hardware must be accounted for separately.

Skip it if you need included tie-down straps and a stabilizer; the Mockins 73-inch carrier lists both in its included components.

This ECOTRIC suits riders seeking a basic steel carrier with a ramp for a bike within 500 pounds and a 2-inch Class II, III, or IV receiver. Account for the separately sourced hitch pin.

Listed on Amazon as: ECOTRIC 500LBS Motorcycle Trailer Hitch Carrier Scooter Dirt Bike Hauler

#7

7. Black Widow Aluminum Motorcycle Carrier

• Load Capacity: 400 lb
• Material: Aluminum
• Compatible with Vehicle Type: Motorcycle

Best for: Compact single-bike loading.

Why it ranks #7: Its aluminum construction keeps the carrier focused on a single bike, with a 400-pound capacity, a loading ramp, and an included anti-tilt device.

The ramp attaches on either side and secures flat against the carrier when stored, making this Black Widow a practical option for loading a dirt bike without keeping a bulky trailer in tow. Its 400-pound capacity and aluminum construction suit riders who need a hitch-mounted platform for a single bike.

This carrier fits Class III or IV 2-inch receivers, so it works with vehicles that have those hitch specifications. The roll-on ramp can be positioned on either side, giving you flexibility around the vehicle when loading; it also stores flat against the carrier to simplify transport and storage. An included anti-tilt device helps minimize movement on the road, while the 400-pound load capacity defines the bike-weight limit to observe.

Skip it if you need capacity above 400 pounds; the VEVOR 600 LBS Steel Motorcycle Carrier offers a higher listed limit.

Choose this for a dirt-bike owner with a Class III or IV 2-inch receiver who values a ramp that stores flat. Keep the 400-pound capacity limit in mind when selecting a bike.

Listed on Amazon as: Black Widow Aluminum Motorcycle Hitch Carrier with Ramp for eBike, 400 lb

#8

8. ECOTRIC 500 lb Hitch Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Vehicle with 2" square receiver (class II…

Best for: Broad receiver compatibility.

Why it ranks #8: This 500-pound steel rack includes a ramp and hardware and fits 2-inch receivers, but its listing does not specifically identify dirt bikes.

A 500-pound capacity paired with compatibility across 2-inch Class II, III, IV, and V receivers gives this ECOTRIC carrier broad hitch-class coverage. Its ramp and two-sided loading options help riders move a motorcycle onto the rack from the side that works best around their vehicle.

The steel frame is specified to fit 2-inch square receivers in four hitch classes, making it a candidate for vehicles with different class ratings while retaining the same receiver size. A supplied ramp supports roll-on loading, and the option to load from either side can accommodate varied parking or access conditions. The 500-pound capacity sets a clear load boundary; its listed steel construction is intended to withstand flaking, scratching, fading, and wear.

Skip it if you want aluminum construction; the Black Widow AMC-400L is an aluminum carrier with a 6-foot ramp.

This ECOTRIC suits riders whose vehicle has a 2-inch receiver in one of the listed hitch classes and who want side-choice flexibility while loading. Check the bike against its 500-pound capacity before hauling.

Listed on Amazon as: ECOTRIC 500LB Hitch Mount Motorcycle Carrier Transportation Racks Hitch

#9

9. VEVOR 600 lb Aluminum Carrier

• Load Capacity: 600 lb
• Material: Aluminum
• Compatible with Vehicle Type: Scooter

Best for: Aluminum high-capacity carrier.

Why it ranks #9: The aluminum carrier lists 600-pound capacity and a self-storing 3.9-foot ramp, but its supplied vehicle compatibility identifies scooters rather than dirt bikes.

This VEVOR pairs aluminum construction with a 600-pound load capacity, a combination for buyers seeking a higher-rated hitch carrier without a steel frame. Its 3.9-foot ramp attaches to the carrier when not in use, keeping the loading accessory connected for storage and avoiding the need to lift a motorcycle onto the platform.

The self-storing ramp supports roll-on loading and remains attached between uses, which simplifies keeping the ramp with the carrier. Aluminum construction distinguishes this model from steel options, while the stated capacity is 600 pounds; the product description says it can carry two motorcycles. At 68.3 pounds, the carrier still has substantial listed weight, so buyers should account for handling it during installation and storage. The listed dimensions are 74.8 by 59.06 by 4.72 inches.

Skip it if you need a listed ramp length of 6 feet; the Black Widow AMC-400L has an extra-long 6-foot ramp.

This suits riders who prioritize aluminum construction and a 600-pound capacity, including buyers considering two motorcycles within the stated limit. Its 68.3-pound weight and listed dimensions are relevant handling and storage considerations.

Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Aluminum Motorcycle Carrier Hitch Mount

#10

10. Black Widow Double Motorcycle Carrier

• Load Capacity: 600 lb
• Material: Aluminum
• Compatible with Vehicle Type: Motorcycle

Best for: Two-bike hitch hauling.

Why it ranks #10: Although rated for 600 pounds total, this aluminum rack is designed to carry two motorcycles, making it a less direct match for a single dirt bike.

This Black Widow’s dual-track design carries two motorcycles on one Class III or IV 2-inch hitch, letting riders haul a pair without a trailer or separate carrier. The aluminum frame has a 600-pound combined capacity, with a stated 400-pound limit per track, and the roll-on ramp mounts on either side.

The two tracks make this carrier a choice for transporting two motorcycles together, while the combined 600-pound capacity and 400-pound per-track limit clarify how to distribute the load. Its aluminum construction supports a 69-pound carrier weight. The ramp can be installed on either side for loading access, and the included anti-tilt device helps limit movement during transport. Fit is restricted to Class III or IV 2-inch receivers, so hitch specifications are essential.

Skip it if you carry only one bike and want a longer ramp; the Black Widow AMC-400L includes a 6-foot ramp.

Choose this for riders hauling two motorcycles on a Class III or IV 2-inch receiver. Keep both the 600-pound combined rating and 400-pound per-track limit in view when matching bikes to the dual carrier.

Listed on Amazon as: Black Widow Double Motorcycle Bike Hitch Carrier, Loading Ramp, 600 lb Cap