Best Wheel To Wheel Running Boards For Trucks

#1 · Best Overall

1. BINARY STAR Silverado/Sierra 1500 Running Boards

• dimensions: 94 x 6 x 5.5 in
• Weight Limit: 500 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: 2019-2026 Chevy Silverado/GMC Sierra 1500…

Best for: Newer GM crew-cab access.

Why it ranks #1: Six-inch carbon-steel boards provide wheel-to-wheel coverage, a listed 500-pound capacity, and included mounting parts for specified crew-cab trucks.

Full wheel-to-wheel coverage from behind the front wheels to ahead of the rear wheels gives compatible Silverado and Sierra crew-cab owners a longer stepping route than a short cab-only step. The 94-inch carbon-steel bars carry a stated 500-pound capacity, with brackets and mounting parts included for installation.

The listing covers 2019–2026 Silverado/Sierra 1500 crew cabs and 2020–2026 2500HD/3500HD crew cabs, while explicitly excluding double cab and diesel applications. That makes checking both cab and powertrain essential before choosing this set. Its 94-inch length and stated wheel-to-wheel span extend the step area toward the rear wheel, and the 6-inch width provides a broad stepping surface. Carbon steel, a 500-pound capacity, and included mounting hardware round out the practical specification set.

Skip it if you have a double cab or diesel; APS IB-CW071SA lists Silverado/Sierra crew-cab fitment for its specified applications.

Choose these bars if your newer Silverado or Sierra matches the listed crew-cab and non-diesel fitment and you want extended step coverage. The stated exclusions are decisive, so this is not a universal match across GM cab and engine configurations.

Listed on Amazon as: BINARY STAR Running Boards Compatible with 2019-2026 Silverado/Sierra 1500

#2 · Longest Listed

2. APS Ford iBoard

• dimensions: 104 x 6 x 1.5 in
• Weight Limit: 500 lb
• Material: Stainless Steel
• Compatible with Vehicle Type: Truck

Best for: Ford SuperCrew wide-step access.

Why it ranks #2: The stainless-steel boards measure 104 inches, provide a six-inch step surface, and list a 500-pound capacity for specified Ford crew cabs.

The 104-inch wheel-to-wheel butt-joint bars provide full-length coverage for listed Ford SuperCrew applications, while a six-inch corrugated step pad creates a broad surface for getting in and out. Stainless-steel construction and a stated 500-pound capacity make strength and corrosion protection central features of this setup.

The fitment names F-150 SuperCrew models with a 6.5-foot bed from 2015–2026 and F-250/F-350 Super Duty crew cabs from 2017–2026. Its 104-inch length extends the step area along the cab, and the six-inch corrugated pad covers the board for textured foot placement. Stainless steel is specified for corrosion protection, and the stated 500-pound capacity gives a defined load limit. Brackets, mounting hardware, and DIY instructions are included, but rocker-panel mounting requires drilling.

Skip it if you will not drill for rocker-panel mounting; APS IB-TW097LW lists a Toyota Tundra application, but its mounting method should be checked separately.

Ford owners matching the listed SuperCrew or Super Duty crew-cab fitment can choose these for broad, textured step coverage. Factor in the stated drilling requirement and the 6.5-foot-bed restriction for the F-150 application before installation.

Listed on Amazon as: APS (Stainless Steel Black 6-inch Wheel to Wheel) Running Boards Nerf Bars Side Steps Compatible with Ford F150 2015-2026 SuperCrew Cab 6.5ft Bed & F-250 F-350 Super Duty 2017-2026 Crew Cab

#3 · Broad Ram Fitment

3. BINARY STAR Ram 1500/2500/3500 Boards

• dimensions: 93 x 6 x 5.5 in
• Weight Limit: 500 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: 2009-2018 Dodge Ram 1500, 2010-2026 Ram…

Best for: Ram long-bed access.

Why it ranks #3: Its 93-inch carbon-steel design lists fitment for Ram 1500, 2500, and 3500 crew cabs, with a six-inch width and 500-pound limit.

A 93-inch wheel-to-wheel layout gives compatible Ram crew-cab owners a continuous stepping surface that reaches toward the bed, making cab entry and bed-side access part of one running-board span. Carbon-steel construction and a stated 500-pound capacity support regular stepping, while included brackets and mounting parts keep the installation package together.

The 93-inch bars are specified for Ram 1500 crew cabs from 2009–2018 and Ram 2500/3500 crew cabs from 2010–2026, including the listed Ram 1500 Classic years. That broad stated range helps owners of different Ram generations identify a potential match, though the cab restriction matters. Carbon steel and a 500-pound weight limit provide defined construction and load details; the included brackets and mounting parts support a DIY installation without sourcing those listed components separately.

Skip it if you have a Quad Cab or a Ram 1500 new body; BINARY STAR B0H6J8Q9PZ specifies the new-body Ram 1500 crew cab.

Ram owners seeking a long stepping span and included installation hardware should consider this set, especially for listed crew-cab applications. Check the specific model-year and cab listing carefully; it does not cover every Ram body or cab configuration.

Listed on Amazon as: BINARY STAR 6 Inch Running Boards Compatible with 2009-2018 Dodge Ram 1500

#4

4. BINARY STAR Silverado/Sierra Classic Boards

• dimensions: 94 x 6 x 5.5 in
• Weight Limit: 500 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: 2007-2018 Chevy Silverado/GMC Sierra 1500…

Best for: Earlier GM crew-cab coverage.

Why it ranks #4: These six-inch carbon-steel boards offer wheel-to-wheel coverage and a 500-pound limit for listed older Silverado and Sierra crew-cab configurations.

A 94-inch wheel-to-wheel span reaches from behind the front wheels toward the rear wheels, giving compatible earlier Silverado and Sierra crew cabs a long stepping route. The six-inch carbon-steel bars have a stated 500-pound capacity, and the package includes mounting brackets and hardware for DIY installation.

The fitment lists 2007–2018 Silverado/Sierra 1500 and 2007–2019 2500HD/3500HD crew-cab applications, plus 2019 Silverado 1500 LD crew cab with four full-size doors. It explicitly excludes double cab and diesel, making those distinctions important before ordering. The 94-inch length and six-inch width give the board its extended stepping footprint; carbon steel and a 500-pound weight limit specify construction and capacity. Included brackets and mounting parts support a DIY installation.

Skip it if you have a double cab or diesel; APS IB-CW071SA lists Silverado/Sierra crew-cab fitment for its specified model range.

This set fits buyers with listed earlier Silverado or Sierra crew-cab configurations seeking a long, wide step surface. Check the year, full-size-door cab, and diesel exclusions closely; the specified fitment does not cover every GM truck configuration.

Listed on Amazon as: BINARY STAR Running Boards Compatible with 2007-2018 Silverado/Sierra 1500

#5

5. APS Ram iBoard

• dimensions: 104 x 6 x 1.5 in
• Weight Limit: 500 lb
• Material: Stainless Steel
• Compatible with Vehicle Type: Truck

Best for: Ram 6.5-foot-bed owners.

Why it ranks #5: The 104-inch stainless-steel iBoards have a six-inch width, anti-slip tread, and a 500-pound capacity for specified Ram crew-cab bed fitment.

A 104-inch wheel-to-wheel butt-joint layout gives listed Ram crew-cab owners with a 6.5-foot bed an extended stepping surface reaching toward the rear wheel. Its six-inch width and patented anti-slip tread support foot placement across the board, while the low-profile matte-black finish provides a restrained appearance.

The 104-inch total length and butt-joint construction create the listed wheel-to-wheel coverage, but assembly is required before installation, so plan for that extra setup step. A six-inch-wide board with patented anti-slip tread gives users a broad, textured stepping area. The stated Ram 6.5-foot-bed fitment and crew-cab safety information make cab and bed configuration important checks. Stainless-steel construction, a 500-pound capacity, and the included brackets and hardware kit provide useful durability and installation details.

Skip it if you want a board requiring no assembly; APS IB-FS175LW lists a 104-inch wheel-to-wheel design but also requires assembly, so compare installation needs carefully.

This set suits Ram crew-cab owners with the specified 6.5-foot bed who value a wide tread and long coverage. Allow time to assemble the butt-joint bars, and verify that the cab and bed configuration matches the listing.

Listed on Amazon as: APS iBoard W2W 6in Running Boards for Ram 1500 2500 3500 Crew Cab 6.5ft Bed

#6

6. APS Silverado/Sierra 6-Inch iBoard

• dimensions: 96 x 6 x 1.5 in
• Weight Limit: 500 lb
• Material: SS
• Compatible with Vehicle Type: Truck

Best for: Black GM short-bed coverage.

Why it ranks #6: This 96-inch design pairs a six-inch step surface with anti-slip tread and a listed 500-pound capacity for Silverado and Sierra crew-cab applications.

A six-inch patented anti-slip tread spans the 96-inch wheel-to-wheel boards, giving compatible Silverado and Sierra crew cabs a broad, textured surface from front-wheel area toward the rear. The low-profile matte-black finish and 5.5-foot-bed fitment make this APS set a focused option for specified short-bed trucks.

The product is listed for Chevy/GMC Silverado/Sierra crew cabs with a 5.5-foot bed, and its 96-inch butt-joint design provides the stated wheel-to-wheel layout. The six-inch patented anti-slip tread supports foot placement across the running board, while the low-profile black matte finish provides the listed appearance. The package includes two boards, mounting brackets, and a hardware kit; the stated capacity is 500 pounds.

Skip it if you prefer a stainless-steel tread surface; APS IB-CW071SA specifies 304 stainless steel for listed Silverado/Sierra crew-cab applications.

This APS set suits Silverado and Sierra crew-cab owners with the specified 5.5-foot bed who want a wide, black step surface. Verify the bed and cab match, and account for the required butt-joint assembly before mounting.

Listed on Amazon as: APS iBoard W2W 6in Running Boards for Silverado Sierra Crew Cab 5.5ft Bed

#7 · Stainless Steel

7. APS Silverado/Sierra 5-Inch iBoard

• dimensions: 100 x 5 x 1.5 in
• Weight Limit: 500 lb
• Material: 304 stainless steel
• Compatible with Vehicle Type: Truck

Best for: Stainless GM short-bed steps.

Why it ranks #7: Its 304 stainless-steel construction, 100-inch listed dimensions, full-width non-slip pad, and 500-pound limit suit buyers preferring stainless steel.

A full-coverage five-inch corrugated non-slip pad runs across the 96-inch wheel-to-wheel boards, giving specified Silverado and Sierra crew cabs textured footing along the step. Solid 304 stainless steel and a stated 500-pound capacity make corrosion protection and load rating defining details of this setup.

The listing names Silverado/Sierra crew cabs with 5.5-foot short beds and certain 2500HD/3500HD 2019 applications, while excluding 2007 Classic models. Check those boundaries alongside the four-full-size-door safety information. The 96-inch butt-joint design requires assembly before installation, so setup takes more than simply attaching finished bars. A five-inch corrugated pad covers the board, and 304 stainless steel with a 500-pound capacity supplies the stated material and load details; brackets and hardware are included.

Skip it if you want a six-inch step surface; APS IB-CS171SB lists a six-inch Silverado/Sierra crew-cab board for its specified 5.5-foot-bed application.

Choose this for listed Silverado or Sierra crew-cab applications when 304 stainless steel and a fully covered textured pad matter. The five-inch width, assembly requirement, short-bed scope, and Classic exclusion are important fit and setup boundaries.

Listed on Amazon as: APS Wheel to Wheel Running Boards 5in Compatible with Chevy Silverado GMC Sierra 2007-2018 Crew Cab 5.5ft Short Bed & 2500 HD 3500 HD 2019 (Exclude 07 Classic) 304 Stainless Steel Side Steps Bars

#8

8. BINARY STAR Ram 1500 New-Body Boards

• dimensions: 90 x 6 x 5.5 in
• Weight Limit: 500 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: 2019-2026 Ram 1500 Crew Cab

Best for: New-body Ram 1500 access.

Why it ranks #8: The 90-inch, six-inch carbon-steel boards list 500-pound capacity and fitment for Ram 1500 new-body crew cabs, not Classic or Quad Cab.

The 90-inch wheel-to-wheel design extends from the front wheel toward the rear wheel, giving 2019–2026 Ram 1500 new-body crew-cab owners a step that also reaches toward the bed. Carbon-steel construction, a six-inch width, and a stated 500-pound capacity complete the core setup.

This listing is specifically for Ram 1500 new-body crew cabs with four full-size doors; it excludes the Classic model, Ram 2500/3500, and Quad Cab. Those distinctions make vehicle identification central to choosing the bars. The 90-inch length provides the stated wheel-to-wheel reach, while the six-inch width offers a substantial stepping surface. Carbon steel and a 500-pound limit specify material and capacity, and the package includes step bars, brackets, mounting parts, and an installation manual.

Skip it if you own a Ram Classic, 2500/3500, or Quad Cab; BINARY STAR B0H45K9W38 lists older Ram 1500 and 2500/3500 crew-cab applications.

Ram 1500 new-body crew-cab owners seeking a long step toward the bed are the target buyer. The four-full-size-door requirement and exclusions are strict boundaries, so distinguish this application from Classic and heavy-duty Ram models.

Listed on Amazon as: BINARY STAR Wheel to Wheel Running Boards Fit 2019-2026 Ram 1500 New Body

#9 · Bed-Access Platform

9. AutoBull Colorado/Canyon Running Boards

• dimensions: 80.51 x 14.96 x 6.5 in
• Material: Carbon Steel
• Compatible with Vehicle Type: 2015-2026 Chevy Colorado/GMC Canyon Crew Cab

Best for: Colorado and Canyon bed reach.

Why it ranks #9: The drop-down design is made for Colorado and Canyon crew cabs and has an extended platform intended to help reach cargo in the bed.

A drop-down dual-convex platform extends the stepping area for Colorado and Canyon crew-cab owners loading roof cargo or reaching toward the bed, reducing the need to climb onto the truck. The carbon-steel rails are listed for 2015–2026 models and include six mounting brackets.

The listing specifies Chevy Colorado/GMC Canyon crew cabs from 2015–2026, so the cab configuration is a key fitment boundary. Its drop-down design and dual-convex platform are described as supporting roof loading and bed access; the extended platform lets users reach cargo without climbing up into the truck. Carbon-steel construction identifies the rail material, while the package includes two running boards and six brackets. The stated dimensions are 80.51 by 14.96 by 6.5 inches, useful when considering the board’s footprint.

Skip it if you drive a truck outside the listed Colorado or Canyon crew-cab years; APS IB-CS171SB covers listed Silverado/Sierra crew-cab applications.

Colorado and Canyon crew-cab owners who want a drop-down platform for entry and cargo reach are the intended buyers. Confirm the truck matches the listed model years and cab type, and account for the broad stated board dimensions.

Listed on Amazon as: Wheel to Wheel Running Boards Compatible with Chevy Colorado/GMC Canyon 2015-2026 Crew Cab, 6" Bed Access Side Step Rails Coated Black Carbon Steel Nerf Bars

#10

10. APS Toyota Tundra iBoard

• dimensions: 104 x 5 x 1.5 in
• Weight Limit: 500 lb
• Material: Stainless Steel
• Compatible with Vehicle Type: Truck

Best for: Tundra Double Cab bed access.

Why it ranks #10: This five-inch stainless-steel option lists a 104-inch length and 500-pound capacity, but its stated Toyota Double Cab fitment makes it less broadly applicable.

A 104-inch wheel-to-wheel layout gives listed Toyota Tundra Double Cab owners with a 6.5-foot bed an extended stepping surface, covered by a five-inch corrugated non-slip pad. The stainless-steel bars have a black powder-coated finish and a stated 500-pound capacity.

This set is specified for 2007–2021 Toyota Tundra Double Cab models with a 6.5-foot bed, making cab and bed configuration key fit checks. The 104-inch butt-joint design provides long coverage, but assembly is required before installation. A five-inch corrugated non-slip pad covers the board for textured footing, while stainless-steel construction and the black powder-coated finish define its material and appearance. The stated 500-pound capacity and included brackets and mounting kit add practical installation and load information; rocker-panel mounting requires drilling.

Skip it if you will not drill or assemble the bars before mounting; APS IB-DS208LB also requires assembly for its listed Ram application.

Tundra Double Cab owners with the listed 6.5-foot bed who want a long, textured step surface are the intended buyers. Allow for assembly and rocker-panel drilling, and confirm the truck matches the specified cab, bed, and year range.

Listed on Amazon as: APS (Black Powder Coated 5 inches Wheel to Wheel) Running Boards Nerf Bars Side Steps Compatible with Toyota Tundra 2007-2021 Double Cab 6.5ft Bed