Best Electric Jack For Horse Trailer: 10 A-Frame Options Compared

#1 · Best Overall

1. VEVOR Electric Trailer Jack

• Load Capacity: 4000 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: Trailer

Best for: Weather-Exposed Trailer Owner.

Why it ranks #1: Its listing specifically names horse trailers, and it provides 4,000-pound capacity, a waterproof cover, and a crank handle for manual operation.

A protective coating over carbon steel is the defining feature of VEVOR’s 4,000-pound electric tongue jack, supporting use around splashes and tough outdoor conditions. The listing specifically names horse trailers among compatible applications, making it a relevant option for horse-trailer owners seeking powered tongue lifting.

Its 4,000-pound capacity serves buyers whose trailer tongue load falls within that rating, while the listed 9.84-to-33.85-inch height range gives a practical reference when considering lift position. Carbon steel with a protective coating addresses exposure to splashes, and the included waterproof sunshade cover adds a layer of protection while parked. A crank handle is also supplied for manual operation, giving the owner an alternative to powered lifting.

Skip it if you need a listed 7,500-pound capacity; the SEALIGHT Electric Trailer Jack offers that higher rating.

This VEVOR fits horse-trailer owners who want a 4,000-pound electric jack with a protective coating and cover for outdoor parking. Keep its stated capacity and 33.85-inch maximum height in view when assessing your trailer.

Listed on Amazon as: VEVOR Electric Trailer Jack, Power Tongue Jack Weight Capacity 4000 lbs, 9.84"-33.85" Electric Tongue Jack with Waterproof Cover for Lifting RV Trailer, Horse Trailer, Utility Trailer, Yacht Trailer

#2 · Highest Capacity

2. POLESTAR 7500lb Electric Jack

• Load Capacity: 7500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: RV, Trailer, Truck

Best for: Higher-Capacity Trailer Setup.

Why it ranks #2: The 7,500-pound listed capacity is the highest in this group, with alloy-steel construction and a waterproof cover and crank included.

A 7,500-pound dynamic rating and 10,000-pound stated static lifting power distinguish this POLESTAR A-frame jack for owners with heavier trailer setups. Electric operation handles routine raising and lowering, while the included crank provides a manual option when powered operation is not being used.

The 7,500-pound dynamic capacity gives this model more stated lifting headroom than lower-capacity options, and its alloy-steel construction supports a heavy-duty role. A waterproof cover is included for parked trailers, and the crank supplies a manual operating alternative. The jack measures 32.28 inches tall and weighs 23.9 pounds, so those dimensions and its weight should factor into tongue-area installation and handling plans.

Skip it if you prioritize a lighter jack over lifting capacity; the POLESTAR 5000lbs Electric Power A-Frame Tongue Jack weighs 21.7 pounds.

Pick this POLESTAR for a heavier trailer owner who needs its 7,500-pound dynamic rating and values an included cover and crank. Its 23.9-pound weight and listed dimensions merit attention before installation.

Listed on Amazon as: POLESTAR Electric Trailer Jack, 7500lbs Electric Power A-Frame Tongue Jack

#3 · Heavy-Duty Pick

3. POLESTAR 5000lb Electric Jack

• Load Capacity: 5000 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: RV, Trailer, Truck

Best for: Heavy Tongue Load Lifter.

Why it ranks #3: Its 5,000-pound dynamic capacity offers a middle ground between 4,000-pound models and the highest-rated options, with a cover and crank included.

A 5,000-pound dynamic rating paired with 7,500 pounds of stated static lifting power gives the POLESTAR a clear role for heavier trailer setups. Its electric A-frame format lets owners raise or lower the tongue without relying on the supplied crank for routine operation.

The alloy-steel construction and 5,000-pound dynamic capacity suit buyers prioritizing substantial lifting support for a trailer or RV. A waterproof cover is included to shield the jack when it is parked outdoors, while the crank offers a manual alternative to electric operation. At 32.28 inches tall and 21.7 pounds, its dimensions and weight are worth considering when planning installation and access around the trailer tongue.

Skip it if you need a lighter listed jack; the 18-pound KYX 3500LBs Electric Trailer Jack is a more suitable weight-focused option.

Choose this POLESTAR for a trailer owner who values a high dynamic rating and included weather cover for routine hitching. Its 21.7-pound weight and 32.28-inch height remain important installation considerations.

Listed on Amazon as: POLESTAR Electric Trailer Jack, 5000lbs Electric Power A-Frame Tongue Jack

#4

4. Kohree 7500lb Electric Jack

• Load Capacity: 7500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: High-Capacity Push-Button Lifter.

Why it ranks #4: A listed 7,500-pound capacity suits buyers needing a high-rated jack, and the package includes a cover, manual crank handle, and mounting bolts.

Kohree’s 7,500-pound electric jack pairs a high stated lifting capacity with press-button controls, enabling powered raising and lowering for heavier RVs, campers, and travel trailers. Its dual-wire direct connection is another defining installation detail for buyers planning the electrical hookup.

The 7,500-pound rating makes capacity the central selection point, while the press-button controls simplify routine raising and lowering at the trailer tongue. Kohree specifies a dual-wire direct connection for installation, so buyers can account for that wiring approach in their setup. The included manual crank offers an alternative operating method, and the package also lists a cover and three mounting bolts for the installation and storage workflow.

Skip it if you need a stated lift range before choosing; the Pafessa 3500lb jack specifies 18 inches of travel plus its foot extension.

Choose this Kohree when a 7,500-pound rating, button controls, and dual-wire connection suit your trailer setup. Its supplied facts do not give a travel range, so buyers needing that measurement should consider it carefully.

Listed on Amazon as: Kohree 7500lbs Electric Trailer Jack with Dual Wire, Built-in Level

#5 · Safety Features

5. SEALIGHT 7500lb Electric Jack

• Load Capacity: 7500 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: RV

Best for: Protected 7500-Pound Lifting.

Why it ranks #5: Its 7,500-pound capacity is paired with listed LED lights and a built-in circuit breaker that cuts power if operated improperly.

A 7,500-pound rating paired with a built-in circuit breaker makes the SEALIGHT a high-capacity option with a specified power-protection feature. Its LED lights also support visibility during nighttime lifting, giving trailer owners two useful details for evaluating operation around the tongue.

The 12V DC motor and 7,500-pound capacity define the jack’s lifting role, while the circuit breaker is specified to cut power if the unit is operated improperly. LED lights add visibility during nighttime lifting, and carbon-steel construction identifies the main body material. The listing names RV compatibility and includes a housing; buyers should assess their A-frame trailer application and the supplied details before selecting it.

Skip it if you need explicitly listed horse-trailer compatibility; the VEVOR Electric Trailer Jack names horse trailers in its title.

Choose SEALIGHT if its 7,500-pound rating, nighttime LEDs, and circuit-breaker protection match your lifting priorities. Its listed vehicle compatibility is RV, so horse-trailer owners should consider that stated boundary.

Listed on Amazon as: SEALIGHT Electric Trailer Jack 7500lbs, Waterproof for A-Frame&RV Trailer

#6 · Faster Lift

6. Kohree 4000lb Electric Jack

• Load Capacity: 4000 lb
• Material: Heavy-duty steel with anti-rust coating
• Compatible with Vehicle Type: Camper, RV, Trailer

Best for: Quick-Lift 4000-Pound Jack.

Why it ranks #6: The listing says it lifts eight inches in 47 seconds, and the 4,000-pound model includes wiring, a cover, crank handle, and mounting bolts.

Kohree states that its 4,000-pound electric jack lifts eight inches in 47 seconds, giving time-conscious A-frame owners a concrete performance figure to weigh. Its 12V DC motor and push-button operation replace repeated manual cranking during routine raising and lowering.

The 4,000-pound dynamic rating and 6,000-pound static lifting figure distinguish the jack’s stated load capacities, while the reported eight-inch lift time helps buyers understand its operating pace. Heavy-duty steel with an anti-rust coating addresses outdoor exposure, and the included cover adds protection while parked. A manual crank handle is supplied as another operating method, and three mounting bolts are included to support the installation workflow.

Skip it if you need a 7,500-pound rating; the Kohree 7500lbs Electric Trailer Jack offers higher stated capacity.

This Kohree suits A-frame owners who want a stated lift-time figure, 4,000-pound dynamic capacity, and supplied crank and cover. Keep its rating and installation requirements in mind when choosing it for a horse trailer.

Listed on Amazon as: Kohree Electric Trailer Jack 4000lbs with Wiring, Heavy Duty, A-Frame

#7

7. Pafessa 3500lb Tongue Jack

• Load Capacity: 3500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: RV, Trailer

Best for: Extended-Reach A-Frame Jack.

Why it ranks #7: It offers 18 inches of travel plus a footpad adding 4.5 inches, with a weather-resistant cover and mounting hardware included.

Eighteen inches of travel plus a drop foot that adds 4.5 inches gives the Pafessa jack an extended lift range for A-frame trailer owners. Its 3,500-pound capacity and fit for 2.25-inch mounting holes provide two concrete selection points for assessing a trailer setup.

The stated 18-inch travel and extra 4.5-inch drop-foot extension provide more reach than the travel figure alone suggests, helping buyers consider how the jack’s lift range suits their parking setup. A 6-inch adjustable footpad supports ground contact, while the 7-foot power cord allows routing to a direct-ground connection; wire terminals are not included. The package also lists mounting hardware and a weather-resistant cover for setup and storage.

Skip it if you need wire terminals supplied; the Kohree 4000lbs Electric Trailer Jack lists mounting bolts and a crank handle instead.

The Pafessa fits A-frame owners who need its stated travel and drop-foot extension, with mounting hardware and a weather-resistant cover included. Check the 2.25-inch mounting-hole fit and source wire terminals separately.

Listed on Amazon as: 12V Electric Tongue Jack 3500lb A-Frame Heavy Duty Trailer Jack 18” Travel Add 4.5” with The Drop Foot & LED Light for Travel Trailer Camper,Protective Cover Included

#8

8. RVMATE Electric A-Frame Jack

• Load Capacity: 3500-4000 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: Nighttime Trailer Hitching.

Why it ranks #8: Its listed 3,500–4,000-pound capacity and adjustable footplate height address varied setups; the listing also notes LED lighting for nighttime operation.

LED lighting and a stated maximum extended height of 32-and-three-fifths inches define the RVMATE’s appeal for trailer owners who work around the tongue after dark. Its electric button controls raise or lower the trailer for hitching, leveling, and parking within the listed 3,500-to-4,000-pound capacity range.

The button-operated lifting function supports routine connection and disconnection, while the stated capacity range gives buyers a load figure to assess against their setup. RVMATE lists a fully retracted height of nine inches and maximum extension of 32-and-three-fifths inches, helping owners compare jack reach with their trailer’s tongue needs. LED lights assist nighttime operation, and star washers are intended to cut through mounting-plate paint for metal-to-metal grounding contact.

Skip it if you need a single stated 7,500-pound capacity; the SEALIGHT Electric Trailer Jack lists that higher rating.

RVMATE suits owners who want button-operated hitching and LED assistance at night, with stated retracted and extended heights for planning. Its capacity is presented as a range, so weigh that detail against your trailer needs.

Listed on Amazon as: RVMATE Electric A-Frame Trailer Jack up to 3500-4000lbs

#9

9. Lippert 3500lb Electric Jack

• Load Capacity: 3500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: LED-Lit Tongue Jack.

Why it ranks #9: This 3,500-pound jack includes a hand crank, foot pad, and mounting pin hardware; its listing also specifies integrated LED lights.

Four integrated LED lights distinguish Lippert’s 3,500-pound electric tongue jack, helping illuminate the work area during trailer hookup in low-light conditions. Its quiet, efficient helical-cut gears are another concrete feature for buyers who want powered lifting without a manual crank as the primary workflow.

A 3,500-pound lifting capacity sets the stated limit for trailer selection, while the four LED lights support visibility around the tongue during nighttime work. Lippert’s helical-cut gears are described as quiet and efficient, connecting the gear design to the operating experience. The listed package includes a hand crank, clevis pin, foot pad, and cotter pin, giving buyers specific supplied components to consider when planning setup and use.

Skip it if you need a higher listed rating; the VEVOR Electric Trailer Jack offers 4,000 pounds of capacity.

Lippert suits trailer owners who value integrated lighting and quiet, efficient gear operation within a 3,500-pound rating. Check that capacity against your trailer’s needs and account for the listed hardware during installation.

Listed on Amazon as: Lippert 3,500 lb Electric Trailer Tongue Jack, RV Power Jack, Black 285318

#10

10. KYX 3500lb Electric Jack

• Load Capacity: 3500 lb
• Material: Aluminum, Steel, Zinc Alloy
• Compatible with Vehicle Type: RV, Trailer

Best for: A-Frame 3500-Pound Setup.

Why it ranks #10: The 3,500-pound A-frame jack has a 12V DC motor and carbon-steel construction, but the supplied listing provides fewer specific included components.

A 12V DC motor rated for 3,500 pounds gives the KYX electric A-frame jack a clear use: powered raising and lowering for trailers within that stated capacity. Its carbon-steel body has an anti-rust surface coating, a useful material detail for a jack exposed to outdoor splashes.

The motor’s 12V DC specification identifies the power type, while the 3,500-pound rating sets the stated lifting limit buyers should use when assessing their trailer. Carbon steel with an anti-rust coating addresses water-splash exposure, and the A-frame format specifies the intended mounting style. The listed package includes the jack itself; unlike several options that list a crank or cover, those accessories are not specified in KYX’s included-components details.

Skip it if you want a listed cover and crank; the POLESTAR Electric Trailer Jack 5000lbs includes both.

Consider the KYX if your A-frame trailer is within the 3,500-pound rating and you value a 12V motor with coated carbon steel. Its listed package contents are limited to the jack, so accessory needs matter.

Listed on Amazon as: KYX Electric Trailer Jack 3500LBs, Elec A-Frame Tongue Jack with Cover