A strong trailer suspension upgrade should match your axle layout and wheelbase while adding travel to cushion road shock; these MORryde kits suit owners upgrading tandem- or triple-axle travel trailers and fifth wheels. The lineup ranges from CRE3000 systems with about 3 inches of travel to the AllTrek 4000 with 4 inches, and includes 33- and 42-inch wheelbase options. Those differences matter more than the shared brand name: a kit intended for the wrong axle count or wheelbase may not fit your suspension setup.
This comparison ranks each product by its stated configuration and useful specifications, while flagging where the supplied listing details leave a fit question. Confirm your trailer’s existing suspension dimensions and axle arrangement before choosing a kit.
MORryde AllTrek 4000 is the leading choice because its listed specifications provide 4 inches of suspension travel, more than the roughly 3 inches stated for the CRE3000 options. It is a tandem-axle kit for a 33-inch wheelbase and lists bolt-on installation and a rubber cushion. That combination makes it a strong fit for buyers whose trailer matches those dimensions and who prioritize the greatest stated travel in this selection.
Verify the wheelbase and mounting compatibility before ordering.
Our Top Picks
Best OverallIts tandem-axle, 33-inch wheelbase configuration adds 4 inches of travel, exceeding the roughly 3 inches listed for the CRE3000 kits.
View on Amazon
Universal Fit OptionThis tandem-axle, 33-inch wheelbase system lists universal fit, over 3 inches of travel, and protection from damaging road shock.
View on Amazon
Bolt-On 33-Inch KitThe tandem 33-inch kit specifies bolt-on installation, up to 3 inches of travel, and a tested rating up to 8,000 lb. axles.
View on Amazon- 42-Inch Tandem Fit MORryde CRE3000 42 Tandem
- Triple-Axle 33-Inch Kit MORryde CRE3000 33 Triple
Compare these trailer suspension options
| # | Product | Weight | Buy |
|---|---|---|---|
| 1 | 1. MORryde AllTrek 4000Best Overall | 15 lb | View on Amazon |
| 2 | 2. MORryde CRE3000 33 TandemUniversal Fit Option | 1 lb | View on Amazon |
| 3 | 3. MORryde CRE3000 Bolt-On 33Bolt-On 33-Inch Kit | 12.87 lb | View on Amazon |
| 4 |  4. MORryde CRE3000 42 Tandem42-Inch Tandem Fit | 1 lb | View on Amazon |
| 5 |  5. MORryde CRE3000 42-inch42-inch tandem travel slot | 35 lb | View on Amazon |
| 6 |  6. MORryde CRE3000 33 TripleTriple-Axle 33-Inch Kit | 12 lb | View on Amazon |
| 7 |  7. MORryde CRE3000 Triple Upgrade33-inch triple-axle upgrade | 16 oz | View on Amazon |
| 8 |  8. MORryde CRE335 TripleTriple-axle road protection | 32 lb | View on Amazon |
Detailed Reviews: Best Independent Suspension For Trailers
#1 · Best Overall
1. MORryde AllTrek 4000
- Weight: 15 lb
Best for: Higher-travel tandem upgrade.
Why it ranks #1: Its tandem-axle, 33-inch wheelbase configuration adds 4 inches of travel, exceeding the roughly 3 inches listed for the CRE3000 kits.
Four inches of suspension travel distinguishes MORryde’s AllTrek 4000 from the three-inch-travel CRE3000 options in this roundup. This tandem-axle kit is listed for a 33-inch wheelbase, pairing that extra movement with a rubber cushion to help protect a trailer as rough roads jolt its suspension.
The AllTrek 4000’s four inches of suspension travel gives the system more listed movement to work with when encountering rough roads, while its rubber cushion is specified as a feature for absorbing that shock. Together, those characteristics support its stated role in protecting a trailer during towing. The kit is identified for tandem axles and a 33-inch wheelbase, and its bolt-on installation provides a defined installation approach. This is the higher-travel choice among the listed 33-inch tandem options.
- Four inches of suspension travel
- Rubber cushion
- Bolt-on installation
- Tandem axle, 33-inch wheelbase kit
- The supplied fit specification is limited to tandem axles with a 33-inch wheelbase.
Skip it if you need a listed 42-inch wheelbase setup; MORryde’s CRE2-1475 is specified for tandem axles with that wheelbase.
This suits tandem-axle trailer owners seeking four inches of travel and a rubber cushion for rough-road protection. The fit is specifically listed for a 33-inch wheelbase, so check that configuration against your trailer before choosing.
Full product details
| Brand | MORryde |
|---|---|
| Item Weight | 15 pounds |
| Item model number | TG2-33 |
| Manufacturer | MORryde |
| Part Number | TG2-35 |
| Model | AllTrek 4000 |
| Dimensions | 14 x 11 x 4 inches |
| Special Features | 3 Year Warranty, 4'' of Suspension Travel, Bolt-On Installation, Made in the USA, Rubber Cushion |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: MORryde TG2-33 – AllTrek 4000 Suspension Upgrade – Tandem Axle, 33'' Wheelbase Kit
View on Amazon#2 · Universal Fit Option
2. MORryde CRE3000 33 Tandem
- Weight: 1 lb
Best for: 33-inch tandem-axle travelers.
Why it ranks #2: This tandem-axle, 33-inch wheelbase system lists universal fit, over 3 inches of travel, and protection from damaging road shock.
More than three inches of suspension travel is the defining feature of the MORryde CRE3000, giving this tandem-axle system room to cushion road shock. Its 33-inch wheelbase specification makes it a targeted upgrade for trailers with that configuration, while bolt-on installation offers a straightforward installation approach.
The CRE3000 combines over three inches of travel with a compressed-rubber suspension element, connecting suspension movement to cushioning against rough-road impacts. That travel is intended to support smoother towing and improved towability compared with conventional leaf springs. Its listed 33-inch wheelbase and tandem-axle configuration help identify the trailers it suits, and the bolt-on installation avoids a more involved installation method. MORryde says the system was tested and rated for up to 8K miles.
- Over three inches of suspension travel
- Compressed-rubber suspension element
- Bolt-on installation
- Tandem axle, 33-inch wheelbase configuration
- Its listed configuration is limited to tandem axles with a 33-inch wheelbase.
Skip it if you have a 42-inch wheelbase; the MORryde CRE2-1475 is listed for tandem axles with that wheelbase.
Choose this for a tandem-axle trailer with a 33-inch wheelbase when added travel and road-shock protection are priorities. Its listed fit is specific, so it is not the match for a 42-inch-wheelbase setup.
Full product details
| Brand | MORryde |
|---|---|
| Item Weight | 1 pounds |
| Item model number | CRE2-33 |
| Manufacturer | Morryde |
| Part Number | CRE2-33 |
| Model | CRE2-33 |
Listed on Amazon as: MORryde CRE2-33 CRE3000 Suspension System, Tandem Axle – 33-Inch Wheel Base
View on Amazon#3 · Bolt-On 33-Inch Kit
3. MORryde CRE3000 Bolt-On 33
- Weight: 12.87 lb
Best for: Bolt-on 33-inch tandem kit.
Why it ranks #3: The tandem 33-inch kit specifies bolt-on installation, up to 3 inches of travel, and a tested rating up to 8,000 lb. axles.
Bolt-on installation and up to three inches of travel give the MORryde CRE2-33 its practical appeal for tandem-axle trailers with a 33-inch wheelbase. The system is presented as a way to cushion road shock and reduce frame stress, linking its suspension movement to protection while towing.
The CRE2-33’s up-to-three-inch travel is paired with stated road-shock protection, helping address the bumps that a trailer encounters on the road. MORryde also lists reduced frame stress and a smoother towing experience, extending the benefit beyond cushioning alone. Its tandem-axle, 33-inch-wheelbase specification defines the fit, and bolt-on installation provides a straightforward mounting approach. The description says it is tested and rated for up to 8,000 lb. ax
- Up to three inches of suspension travel
- Protection from road shock
- Reduced frame stress
- Bolt-on installation
- Its listed application is limited to tandem axles with a 33-inch wheelbase.
Skip it if you have a 42-inch tandem wheelbase; the MORryde CRE2-1000 is listed for tandem axles with that wheelbase.
Choose this MORryde system for a tandem-axle trailer with a 33-inch wheelbase when bolt-on installation and road-shock protection suit your upgrade plans. The listed fit does not extend to 42-inch wheelbases.
Full product details
| Brand | MORryde |
|---|---|
| Item Weight | 12.87 pounds |
| Item model number | CRE2-33 |
| Manufacturer | MORryde |
| Part Number | CRE2-33 |
| Model | CRE2-33 |
| Package Dimensions | 19 x 12.5 x 3.2 inches |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including styrene which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: MORryde CRE2-33 CRE3000 Bolt-On Suspension System Upgrade – Tandem Axle, 33" Wheelbase, Blue
View on Amazon#4 · 42-Inch Tandem Fit
4. MORryde CRE3000 42 Tandem
- Weight: 1 lb
Best for: 42-inch tandem fit.
Why it ranks #4: This bolt-on suspension upgrade is explicitly for tandem axles with a 42-inch wheelbase and lists up to 3 inches of travel.
A 42-inch wheelbase specification sets the MORryde CRE2-1475 apart among the tandem-axle upgrades here. Its suspension provides up to three inches of travel to help cushion road shock, while the listed bolt-on installation offers a direct upgrade path for a compatible fifth wheel or travel trailer.
This system connects up to three inches of suspension travel with protection from road shock, a useful combination for fifth-wheel and travel-trailer owners seeking a smoother towing experience. MORryde also lists reduced frame stress as a benefit, tying the suspension upgrade to less stress on the trailer frame. The 42-inch wheelbase and tandem-axle designation narrow its intended fit, while bolt-on installation keeps the described installation method simple. It is tested and rated for up to 8,000 lb. ax
- Tandem-axle, 42-inch wheelbase configuration
- Up to three inches of suspension travel
- Road-shock protection
- Bolt-on installation
- Its listed application is tandem axle, not a triple-axle setup.
Skip it if you have a 33-inch tandem wheelbase; the MORryde CRE2-33 is listed for that configuration instead.
Pick this for a tandem-axle fifth wheel or travel trailer with a 42-inch wheelbase when travel, shock protection, and reduced frame stress matter. Its listed configuration does not cover triple axles.
Full product details
| Brand | MORryde |
|---|---|
| Item Weight | 1 pounds |
| Item model number | CRE2-1475 |
| Manufacturer | MORryde |
| Part Number | CRE2-1475 |
| Model | CRE2-1475 |
| Dimensions | 20 x 8 x 4 inches |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including styrene which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: MORryde CRE2-1475 CRE3000 Bolt-On Suspension System Upgrade – Tandem Axle, 42" Wheelbase
View on Amazon#5
5. MORryde CRE3000 42-inch
- Weight: 35 lb
Best for: 42-inch tandem travel slot.
Why it ranks #5: It specifies a 42-inch wheelbase, 3 inches of wheel travel, a rubber spring, and bolt-on installation for compatible trailer setups.
A unique travel slot provides three inches of wheel travel on the MORryde CRE2-1000, giving its tandem-axle system room to help protect a trailer on harsh roads. The 42-inch wheelbase specification sets its fit, and a rubber spring cushions shock for a smoother towing experience.
The travel slot supplies three inches of wheel travel, while the rubber spring cushions shock; these features connect suspension movement with a more comfortable tow and protection from rough-road impacts. MORryde lists bolt-on installation, giving buyers a defined mounting approach, and the system is made in the USA. Its tandem-axle, 42-inch-wheelbase designation is a key compatibility boundary. The product description also says the suspension upgrade is tested and rated for up to 8,000 lb. ax
- Three inches of wheel travel
- Rubber spring cushions shock
- Bolt-on installation
- Tandem-axle, 42-inch wheelbase configuration
- Its listed fit is for tandem axles, not triple-axle trailers.
Skip it if you have a triple-axle trailer; the MORryde CRE333 is listed for triple axles with a 33-inch wheelbase.
This suits tandem-axle trailer owners with a 42-inch wheelbase who want a rubber spring and three inches of wheel travel. Its axle and wheelbase listing makes fit the main boundary to consider.
Full product details
| Brand | MORryde |
|---|---|
| Item Weight | 35 pounds |
| Item model number | CRE2-1000 |
| Manufacturer | MORryde |
| Part Number | CRE2-1000 |
| Model | CRE2-1000 |
| Dimensions | 22 x 14 x 9 inches |
Listed on Amazon as: MORryde CRE2-1000 CRE3000 Bolt-On Suspension System Upgrade – Tandem Axle, 42" Wheelbase
View on Amazon#6 · Triple-Axle 33-Inch Kit
6. MORryde CRE3000 33 Triple
- Weight: 12 lb
Best for: 33-inch triple-axle towing.
Why it ranks #6: This system is designed for triple axles and a 33-inch wheelbase, with 3 inches of travel and protection from road shock.
Three inches of suspension travel gives the MORryde CRE3-33 a concrete advantage for triple-axle trailer owners seeking road-shock protection. Its 33-inch wheelbase specification identifies the intended setup, while the system’s bolt-on installation offers a stated path for upgrading from conventional leaf-spring suspension.
The CRE3-33’s three inches of travel are linked to smoother towing, improved towability, and protection from damaging road shock. Those benefits make the travel figure relevant for owners of a triple-axle trailer encountering rough roads. The 33-inch wheelbase specification helps narrow the fit, while bolt-on installation describes how the system is mounted. MORryde says this model is tested and rated for up to 8K miles, a stated test rating rather than a travel or load specification.
- Three inches of suspension travel
- Triple-axle, 33-inch wheelbase configuration
- Protection from damaging road shock
- Bolt-on installation
- Its listed configuration is limited to triple axles with a 33-inch wheelbase.
Skip it if you have a tandem-axle trailer; the MORryde CRE2-33 is listed for tandem axles with a 33-inch wheelbase.
Choose this for a triple-axle trailer with a 33-inch wheelbase when added travel and road-shock protection are priorities. Its specified axle count and wheelbase are the key fit boundaries.
Full product details
| Brand | MORryde |
|---|---|
| Item Weight | 12 pounds |
| Item model number | CRE3-33 |
| Manufacturer | MORryde |
| Part Number | CRE3-33 |
| Model | CRE3-33 |
| Package Dimensions | 13.31 x 13.11 x 12.01 inches |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including styrene which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: MORryde CRE3-33 CRE3000 Suspension System, Triple Axle – 33" Wheel Base
View on Amazon#7
7. MORryde CRE3000 Triple Upgrade
- Weight: 16 oz
Best for: 33-inch triple-axle upgrade.
Why it ranks #7: The listing identifies a triple-axle, 33-inch wheelbase upgrade and states up to 3 inches of travel, but provides fewer fit details.
Up to three inches of suspension travel is the key figure for the MORryde CRE333, a triple-axle upgrade listed for a 33-inch wheelbase. That movement is paired with road-shock protection and reduced frame stress, while bolt-on installation gives trailer owners a clearly stated mounting approach.
The CRE333 ties up to three inches of travel to protection from road shock, helping address jolts encountered while towing. Its listed reduced-frame-stress benefit adds a second practical reason to consider the upgrade, beyond ride smoothness alone. The product is identified for a triple-axle, 33-inch-wheelbase trailer, making that fit detail central to selection. Bolt-on installation offers a direct installation method, and the description says the system is tested and rated for up to 8,000 lb. ax
- Triple-axle, 33-inch wheelbase configuration
- Up to three inches of suspension travel
- Road-shock protection
- Bolt-on installation
- Its listed configuration does not cover tandem-axle trailers.
Skip it if you tow a tandem-axle trailer; the MORryde CRE2-33 is listed for tandem axles with a 33-inch wheelbase.
This is a fit-focused choice for a triple-axle trailer with a 33-inch wheelbase, especially when travel and frame-stress reduction matter. Its stated axle configuration rules it out for tandem-axle owners.
Full product details
| Brand | MORryde |
|---|---|
| Compatible with Vehicle Type | Trailer |
| Included Components | MORryde CRE3-33 CRE3000 Bolt-On Suspension System Upgrade – Triple Axle, 33" Wheelbase |
| Item Weight | 16 ounces |
| Manufacturer | Morryde |
| Part Number | CRE3-33 |
| Manufacturer Warranty Description | 2-year warranty |
| Material | Metal |
| Model Number | CRE333 |
| Style | MORryde CRE3-33 CRE3000 Bolt-On Suspension System Upgrade – Triple Axle, 33" Wheelbase |
| Style Name | MORryde CRE3-33 CRE3000 Bolt-On Suspension System Upgrade – Triple Axle, 33" Wheelbase |
Listed on Amazon as: MORryde CRE333 Triple Suspension System
View on Amazon#8
8. MORryde CRE335 Triple
- Weight: 32 lb
Best for: Triple-axle road protection.
Why it ranks #8: This triple suspension system offers increased wheel travel and road-shock protection, but its listing does not specify a wheelbase.
A unique travel slot gives the MORryde CRE335 Triple Suspension System increased wheel travel, connecting suspension movement with protection from damaging road shock. The triple-suspension design is the defining fit consideration here, and its alloy-steel construction and listed hardware details speak to the system’s mechanical setup.
The travel slot provides increased wheel travel, which the product description links to a noticeable difference in towing and reduced stress from rough roads. MORryde also identifies smoother towing than conventional leaf springs as a benefit, making this an option for triple-axle trailer owners seeking a ride-focused suspension upgrade. The alloy-steel material and included graspable bolts, half-inch shackles, and bronze bushing describe key parts of the installation hardware. No travel measurement is supplied for this model.
- Unique slot for increased wheel travel
- Protection from damaging road shock
- Smoother towing than conventional leaf springs
- Alloy-steel construction with specified hardware
- No numerical suspension-travel measurement is supplied for this model.
Skip it if you require a stated travel figure; the MORryde CRE333 lists up to three inches for a triple-axle system.
Consider this triple-suspension option if increased wheel travel and road-shock protection are your priorities. Its travel is described without a numerical measurement, so buyers who need a specified figure may prefer the CRE333.
Full product details
| Brand | MORryde |
|---|---|
| Included Components | trailer,axles |
| Item Weight | 32 pounds |
| Manufacturer | MOR/ryde |
| Part Number | CRE3-35 |
| Manufacturer Warranty Description | Manufacture Warranty |
| Material | Alloy Steel |
| Model Number | CRE3-35 |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including styrene which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: MORryde CRE335 Triple Suspension System
View on AmazonAvoid wheelbase and axle-count fit traps
A correct axle count alone does not confirm that a suspension kit fits; wheelbase is a separate compatibility checkpoint. The products here illustrate the distinction: several are specified for tandem axles at either 33 or 42 inches, while triple-axle options include 33-inch versions and one listing that gives no wheelbase. Do not infer that two kits fit the same trailer just because both say tandem or triple.
Measure and verify the dimension required by the kit documentation, and confirm that the suspension arrangement matches the listed axle configuration. The CRE335 Triple listing is especially uncertain on this point because its title does not state a wheelbase.
Also check the exact product and installation requirements with the manufacturer or a qualified installer before ordering; the supplied listings do not provide full frame, hanger, or axle compatibility charts.
Understand the travel-versus-fit trade-off
More listed suspension travel is useful only when the kit matches the trailer, so fit should take priority over the largest number. AllTrek 4000 lists 4 inches of travel, while the CRE3000 products generally state about 3 inches or more than 3 inches. That makes AllTrek the clear travel leader in this set, but it is specifically listed for tandem axles and a 33-inch wheelbase.
A 42-inch tandem trailer or a triple-axle trailer should not be treated as compatible based on travel figures alone. Another practical limitation is that these are described as suspension system upgrades, with bolt-on installation cited on some listings, not complete instructions for every trailer configuration.
A mismatch or incorrect installation could leave the suspension operating outside the intended arrangement; verify application details and installation requirements before purchase.
How to Choose a Trailer Suspension Upgrade
Axle count and wheelbase
Start by matching the kit’s axle arrangement and wheelbase to your trailer. This selection includes tandem-axle kits for 33-inch and 42-inch wheelbases, triple-axle kits for 33 inches, and the CRE335 Triple listing, which does not state a wheelbase. The AllTrek 4000 and CRE3000 33 Tandem suit a buyer whose trailer matches the tandem 33-inch specification; the CRE3000 42 Tandem is the listed option for a matching tandem 42-inch setup.
Triple-axle owners should look at the 33-inch triple listings but verify compatibility, particularly where dimensions are absent. Measure against the relevant suspension reference points and confirm the manufacturer’s fitment requirements rather than relying on axle count alone.
Listed suspension travel
Choose the travel figure only after confirming fit, then compare how much movement each kit lists. The AllTrek 4000 specifies 4 inches, while CRE3000 listings generally cite 3 inches, up to 3 inches, or more than 3 inches. That is the key stated performance difference in this product group.
Buyers with a compatible tandem, 33-inch setup who want the greatest listed travel have a clear candidate in AllTrek Owners prioritizing a correctly matched 42-inch tandem or 33-inch triple configuration should choose among the corresponding CRE3000 options instead of stretching the fit for an extra inch.
Product descriptions vary in wording, so treat these as the manufacturers’ stated figures, not a direct comparative test.
Installation and supporting details
Check the stated installation method and any load or warranty details relevant to your decision. Several listings describe bolt-on installation, including the AllTrek 4000, CRE3000 Bolt-On 33, and the 42-inch CRE3000 Tandem. The 33-inch tandem listings include an 8,000 lb.
axle rating in their descriptions, while not every product listing repeats that information. The CRE3000 42-inch option also lists a two-year warranty, and AllTrek 4000 lists a three-year warranty; warranty terms are product-specific and should be checked before purchase.
Buyers seeking a specified bolt-on upgrade can start with the listings that state it explicitly. Do not assume that bolt-on means identical tools, labor, or fitment for every trailer, since the supplied product information does not provide a universal installation procedure.
Which Trailer Suspension Upgrade Should I Choose?
Choose by axle count and wheelbase first, then use travel to break a tie. For a compatible tandem-axle trailer with a 33-inch wheelbase, MORryde AllTrek 4000 leads with 4 inches of listed travel; MORryde CRE3000 33 Tandem is an alternative that states universal fit and more than 3 inches of travel. If your tandem setup measures 42 inches, compare MORryde CRE3000 42 Tandem and MORryde CRE3000 42-inch, both of which specify that wheelbase.
For a 33-inch triple-axle trailer, consider MORryde CRE3000 33 Triple or MORryde CRE3000 Triple Upgrade, confirming fit details before purchase. MORryde CRE335 Triple is harder to recommend because its listing omits wheelbase.
Confirm application and installation requirements before ordering.
Related Buying Guides
Frequently Asked Questions
How do I measure a trailer suspension wheelbase and confirm the kit will fit?
Measure the suspension wheelbase using the same reference points specified by the kit manufacturer, then confirm the trailer’s axle count and mounting arrangement. Compare those details with the product listing and installation instructions before ordering. If the reference points or fit requirements are unclear, ask the manufacturer or a qualified trailer technician to verify compatibility.
Can I install a suspension upgrade without changing my axles or leaf springs?
Possibly, but compatibility depends on the specific kit and your trailer’s existing suspension and mounting arrangement. Check the product’s installation instructions for required changes rather than assuming that a bolt-on description means every component can remain unchanged. Confirm axle count, wheelbase, and mounting compatibility before beginning work.
What other suspension components should I inspect or replace during installation?
Inspect the surrounding suspension and mounting hardware for wear, damage, or looseness, including the components identified in the kit instructions. Check that attachment points are sound and that the existing setup matches the kit’s requirements. Replace parts only when the instructions call for it or inspection shows a problem; consult a qualified technician if unsure.
How should I choose between kits with different listed travel?
First narrow the options by axle count, wheelbase, and mounting compatibility; travel is a useful comparison only after those requirements match. Among the listed options, AllTrek 4000 specifies 4 inches of travel, while CRE3000 options state more than 3 inches. Confirm the exact application before choosing based on travel.
What should I do if a triple-axle listing does not state its wheelbase?
Treat the missing wheelbase as an unresolved fit detail, not proof that the kit will fit. Contact the manufacturer or seller to confirm the intended wheelbase and mounting requirements for your trailer, and compare that information with your measurements. The CRE335 Triple listing does not specify wheelbase, so verify application before ordering.
Final Words
Choose by axle count and measured wheelbase first, then compare listed travel among kits that match. For a compatible tandem trailer with a 33-inch wheelbase, AllTrek 4000 leads with 4 inches of stated travel; CRE3000 33 Tandem is an alternative. For 42-inch tandems or 33-inch triples, compare the corresponding listings and confirm mounting requirements.
Treat the CRE335 Triple’s unspecified wheelbase as a reason to verify fit before ordering.
