Best Jack For Low Cars: Compare 10 Low-Profile Options

#1 · Best Overall

1. AV Steel Low Profile 3 Ton

• Load Capacity: 6600 lb
• Material Type: Alloy Steel
• Compatible with Vehicle Type: Car
• Dimensions: 31.7 x 15.8 x 8.3 in

Best for: Low-clearance cars needing reach.

Why it ranks #1: Its 3-1/8-inch minimum height is the lowest stated here, with 6,600-pound capacity and a 19-7/8-inch maximum lift.

A 3-1/8-inch minimum height lets the AV Steel floor jack slide beneath many low-riding vehicles, while its 19-7/8-inch maximum provides a broad lifting span. The 3-ton rating adds capacity for suitable cars, making this model a fit for buyers who need both low entry and substantial elevation.

The 3-1/8-to-19-7/8-inch range connects low-clearance access with room to raise a vehicle for service, so it can suit jobs needing more height than a short-range jack provides. Its 6,600-pound capacity sets the load boundary, and the dual-piston quick-lift pump is intended to speed lifting workflow. Alloy-steel construction and the listed 31.7-by-15.8-by-8.3-inch dimensions are relevant when planning workshop storage and handling.

Skip it if you need a shorter jack for tight storage; the AV Steel 2.5 Ton model measures 23.38 by 9.21 by 6.26 inches.

Pick this for car maintenance when low entry and a high 19-7/8-inch maximum matter alongside 3-ton capacity. Check the jack's substantial listed dimensions against your storage space and the vehicle's lifting requirements.

Listed on Amazon as: AV Steel Low Profile Floor Jack 3 Ton (6600 lbs), Heavy Duty Hydraulic Jack for Car, Heavy-Duty Floor Jack with Dual Pistons Quick Lift Pump, Car Floor Jack with Lifting Range 3-1/8'' to 19-7/8''

#2 · Best for Sedans

2. AV Steel Low Profile 2.5 Ton

• Load Capacity: 5000 lb
• Material Type: Alloy Steel
• Compatible with Vehicle Type: Car
• Dimensions: 23.38 x 9.21 x 6.26 in

Best for: Sedans with low clearance.

Why it ranks #2: The 3.4-inch minimum suits low passenger cars, and its 5,000-pound capacity and 14.6-inch maximum are clearly specified.

A 3.4-inch minimum height helps this AV Steel jack reach beneath low-clearance passenger cars, while its 14.6-inch maximum suits jobs within that lift limit. The 2.5-ton rating targets cars, coupes, hatchbacks, and sedans; its product guidance specifically excludes trucks, SUVs, and lifted vehicles.

The 3.4-to-14.6-inch lift range gives sedan owners a defined access and elevation window, making it important to check the vehicle's required height before a job. A 5,000-pound capacity accommodates vehicles within that rating, and the single-piston hydraulic pump keeps the setup straightforward. The alloy-steel jack measures 23.38 by 9.21 by 6.26 inches and weighs 30 pounds, details that help buyers plan storage and handling.

Skip it if you lift trucks or SUVs; the VEVOR 2.5 Ton floor jack lists use for trucks and SUVs and reaches 14.96 inches.

This is a focused choice for low-clearance cars, coupes, hatchbacks, and sedans within 5,000 pounds. Avoid it for trucks, SUVs, or lifted vehicles, and confirm the required lift stays within 14.6 inches.

Listed on Amazon as: AV Steel Low Profile Floor Jack 2.5 Ton (5000 lbs), Lift Range 3.4" to 14.6" for Cars & Sedans, Hydraulic Steel Jack with Single Piston Pump – Not for Trucks or SUVs

#3 · Wide Vehicle Range

3. VEVOR 2.5 Ton Floor Jack

• Load Capacity: 2.5 tons
• Material Type: Steel
• Compatible with Vehicle Type: Truck
• Dimensions: 22.2 x 8.7 x 5.2 in

Best for: Broad-range DIY lifting.

Why it ranks #3: Its 3.35-inch minimum and 5,500-pound capacity pair low access with a stated range for family cars, trucks, and SUVs.

A 3.35-inch minimum height gives the VEVOR floor jack access beneath many low cars, while its range extends to 14.96 inches. The 2.5-ton capacity and listed suitability for family cars, trucks, and SUVs make it a flexible option for owners whose vehicles fit both its load and height limits.

The 3.35-inch entry height helps position the jack beneath lower vehicles, and the 14.96-inch maximum covers a useful range of tire, oil, and brake maintenance tasks. Its 5,500-pound capacity sets the weight boundary, while the single-piston pump provides the stated lifting mechanism. Steel construction and 22.2-by-8.7-by-5.2-inch dimensions matter for workshop storage; the jack is supplied as a standalone unit, so no extra included accessories are listed.

Skip it if you want dual-piston quick lifting; the AV Steel AV-300102F lists a dual-piston quick-lift pump and a 3-1/8-inch minimum height.

This suits DIY owners servicing a compatible car, truck, or SUV who value a 3.35-to-14.96-inch range. Match vehicle weight and clearance to its 5,500-pound capacity and lifting limits.

Listed on Amazon as: VEVOR 2.5 Ton Low Profile Heavy-Duty Steel Racing Floor Jack

#4 · Long-Reach Design

4. Maxority 3 Ton Floor Jack

• Load Capacity: 6600 lb
• Material Type: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Lowered-car workshop access.

Why it ranks #4: The listing highlights extended reach and low-profile access for sports and lowered cars, with 6,600-pound capacity; minimum height is unspecified.

An ultra-low profile paired with extended reach lets the Maxority floor jack approach vehicles with minimal ground clearance, including lowered cars and sports cars. Its 3-ton capacity offers more rated lifting headroom than smaller car jacks, while the long-reach format can help reach low undercarriages and aftermarket-modified vehicles.

The low-profile frame addresses the first hurdle for lowered cars: getting a jack beneath the vehicle. Extended reach helps position it farther under the chassis, which is useful when modifications or limited clearance complicate access. Its 6,600-pound capacity suits vehicles within that rating, and alloy-steel construction provides the specified heavy-duty material. The included pumping handle supports operation, though buyers should compare the vehicle's lift points and required lifting height with the jack's listed specifications before purchase.

Skip it if you need a published lift-height range or a compact trunk kit; the Gurduenon scissor jack lists a 4.33-to-15.75-inch range and storage bag.

This suits owners of lowered cars or sports cars who need low-profile access and extended reach in a workshop. The supplied details omit a numerical lifting range, so buyers needing that figure should choose accordingly.

Listed on Amazon as: Maxority 3-Ton (6600lbs) Low Profile Hydraulic Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Random Color, 3 Ton Low Profile)

#5 · Lightweight Capacity

5. YELLOW JACKET 1.5 Ton

• Load Capacity: 1.5 ton
• Material Type: Alloy Steel, Aluminum
• Compatible with Vehicle Type: Car
• Dimensions: 21.8 x 9.72 x 5.9 in

Best for: Light-duty quick-lift cars.

Why it ranks #5: A 3.5-inch minimum and dual-piston pump support low access, but its 3,300-pound limit rules out heavier vehicles.

A 3.5-inch minimum height and dual-piston pump pair low-profile access with faster lifting than a single-pump system, according to the listing. The YELLOW JACKET's 1.5-ton capacity is suited to lighter cars within its rating, with a 14-inch maximum lift height for defined service needs.

The 3.5-to-14-inch lifting range gives compatible cars a low approach and a stated upper limit for maintenance tasks. Its 3,300-pound capacity is the key boundary: the listing warns that SUVs or larger vehicles may exceed it. A dual-piston pump is specified for faster lifting than a single pump, while the aluminum-and-steel construction combines the named materials in a 21.8-by-9.72-by-5.9-inch floor jack.

Skip it if you need more than 3,300 pounds of capacity; the Jack Boss AS830011L is rated for 6,600 pounds and lists SUV use.

This fits owners of lighter cars who want low-profile access and a dual-piston pump for service lifting. Check vehicle weight carefully; the 1.5-ton limit can exclude SUVs and larger vehicles.

Listed on Amazon as: YELLOW JACKET Floor Jack 1.5 Ton Hydraulic Low Profile Aluminum and Steel Car Jack Lightweight Service Jack with Quick Lift Dual Pump, 3300 lbs Capacity

#6

6. ARCAN 3-Ton Steel Jack

• Load Capacity: 6000 lb
• Material Type: Metal
• Compatible with Vehicle Type: Car
• Dimensions: 6.3 x 29.3 x 13.8 in

Best for: Reinforced steel garage service.

Why it ranks #6: Its low-profile frame, 6,000-pound capacity, and bypass and overload valves are useful, though no minimum height is provided.

High-carbon-steel side plates reinforce the ARCAN jack's chassis for demanding service conditions, while its low-profile frame supports positioning under low-ground-clearance vehicles. The 3-ton, 6,000-pound rating fits substantial automotive lifting needs, with bypass and overload valves providing listed hydraulic protection.

The low-profile frame helps the jack reach beneath vehicles with limited ground clearance, a practical advantage for tire service and maintenance. High-carbon-steel side plates add structural reinforcement for demanding use, while the 6,000-pound capacity sets the load limit. Bypass and overload safety valves help prevent over-extension and use beyond rated capacity. Its steel construction and 76.8-pound listed weight make it more suited to a stationary garage workflow than frequent carrying.

Skip it if you need an easier jack to carry between locations; the SATA 3T Aluminum model is listed as 30% lighter than traditional steel models.

This suits garage users seeking reinforced steel construction for automotive repair, tire service, or maintenance under low-clearance vehicles. Its 76.8-pound weight is a meaningful boundary for anyone needing frequent portability.

Listed on Amazon as: ARCAN 3-Ton Steel Low Profile Floor Jack, Model A20003

#7

7. Jack Boss 3 Ton

• Load Capacity: 3 tons
• Material Type: Aluminum
• Compatible with Vehicle Type: Bus, Trailer
• Dimensions: 23.6 x 11.8 x 6.3 in

Best for: High-capacity low-clearance work.

Why it ranks #7: The 3-15/16-inch minimum and 6,600-pound capacity fit many cars, but its listed entry height is higher than leading options.

A 3-15/16-inch minimum height combines with a 3-ton rating to bring this Jack Boss racing jack to low-clearance vehicles requiring substantial capacity. Its 18-5/16-inch maximum extends the working range, while aluminum-and-steel construction and a rubber saddle support a feature-rich garage setup.

The low entry height helps position the jack beneath cars with limited ground clearance, and the 18-5/16-inch maximum gives added lift range for service tasks. Its 6,600-pound capacity suits vehicles within that rating, with listed applications including sedans, SUVs, MPVs, station wagons, travel trailers, and minivans. The dual-piston quick-lift pump supports faster raising, while the included two-piece handle and rubber saddle provide the listed operating components.

Skip it if you need a lighter jack for frequent carrying; the SATA 3T Aluminum jack is listed as 30% lighter than traditional steel models.

Choose this for workshop lifting of compatible low-clearance cars, SUVs, or listed larger vehicle types within 6,600 pounds. Its 58.5-pound listed weight makes portability a consideration before purchase.

Listed on Amazon as: Jack Boss 3 Ton Low Profile, Aluminum and Steel Racing Floor Jack with Dual Pistons Quick Lift Pump, 1.5X Overload Tested for Safety, Sport Utility Vehicle, Lifting Range 3-15/16" min to 18-5/16" max

#8

8. SATA 3-Ton Aluminum Jack

• Load Capacity: 3 T
• Material Type: Aluminum
• Compatible with Vehicle Type: Car
• Dimensions: 28.35 x 13.58 x 6.34 in

Best for: Portable high-capacity service.

Why it ranks #8: Its 6,600-pound capacity and dual-piston pump are specified, but the listing gives no minimum height to confirm low-car fit.

Aluminum construction makes the SATA 3-ton jack 30% lighter than traditional steel models, according to its listing, easing handling for roadside repairs or frequent movement. Its low-profile design and dual-piston rapid-lift pump pair access with quicker raising, while the 6,600-pound rating sets its load limit.

The low-profile design helps position the jack beneath lower vehicles, and the dual-piston rapid-lift pump supports a faster lifting workflow. Aluminum construction is listed as 30% lighter than traditional steel models and corrosion-resistant, practical qualities for roadside use or repeated transport. Its 3-ton, 6,600-pound capacity serves vehicles within that rating. The listing also states each unit is tested to 4.5 tons, or 1.5 times rated capacity, before leaving the factory.

Skip it if you need a published lift-height range before buying; the AV Steel AV-300102F lists a 3-1/8-to-19-7/8-inch range.

Choose this for professional or home service where lower weight, low-profile access, and rapid lifting matter. The supplied specifications omit a numerical height range, so confirm that this information meets your selection needs.

Listed on Amazon as: SATA 3-Ton (6,600 lb) Aluminum Floor Jack, Low-Profile Design with Dual-Piston Rapid Lift Pump, Tested for 1.5X Overload for Ultimate Safety, 30% Lighter Than Steel Model

#9

9. Gurduenon Scissor Jack

• Load Capacity: 4409 lb
• Material Type: Alloy Steel
• Compatible with Vehicle Type: Car, Sport Utility Vehicle
• Dimensions: 17.13 x 3.54 x 4.33 in

Best for: Trunk-ready tire changes.

Why it ranks #9: The kit states a 4.33-inch minimum, 2-ton capacity, and included lug wrench, making it a portable tire-change option rather than a garage jack.

A tire-changing bundle with a scissor jack, ratchet wrench, lug wrench, gloves, pressure gauge, and storage bag gives roadside users several listed essentials together. The jack's 4.33-inch minimum height reaches under low-chassis sedans, while its 15.75-inch maximum and 2-ton capacity also cover specified higher-body vehicles within its rating.

The 4.33-to-15.75-inch lifting range spans low sedans and higher-body SUVs, while the 2-ton rating defines the load ceiling. Its manual scissor format suits a tire-change kit rather than a hydraulic floor-jack workflow. The included ratchet and lug wrenches, gloves, pencil tire-pressure gauge, and storage bag keep related roadside items together; the listed 17.13-by-3.54-by-4.33-inch dimensions also support planning trunk storage.

Skip it if you want a hydraulic garage jack with a quick-lift pump; the YELLOW JACKET AS815016L has a dual-pump system.

Choose this kit for drivers who want a packaged tire-change setup for a car, SUV, or MPV within 2 tons. Its scissor-jack format is aimed at tire changes, not floor-jack workshop lifting.

Listed on Amazon as: Scissor Car Jack 2 Ton (4409 lbs) Tire Changing Kit with Lug Wrench – Emergency Kit for Car, SUV, MPV

#10

10. DNA MOTORING 2 Ton Jack

• Load Capacity: 2 tons
• Material Type: Alloy Steel
• Compatible with Vehicle Type: Car
• Dimensions: 10 x 19 x 8 in

Best for: Compact-car garage lifting.

Why it ranks #10: Its 5.1-inch minimum is the highest stated, limiting access under low cars despite a 4,000-pound capacity.

A 5.1-inch minimum lift height gives the DNA MOTORING TOOLS-00234 access under many passenger cars with limited clearance, while its hydraulic trolley format suits garage service. Its 2-ton rating and 13-inch maximum height set a clear use range: car lifting rather than truck or oversized-SUV work.

The 2-ton capacity supports cars within its stated load limit, and the 5.1-to-13-inch lifting range covers a defined span for service tasks. Alloy-steel construction supplies the jack's working structure, while the trolley format is intended for garage service and heavy-duty industrial use. The listed vehicle guidance excludes pickups, trucks, and very large SUVs, so buyers should match both vehicle weight and required lift height to the jack before relying on it.

Skip it if you need more than 13 inches of lift or service a truck; the VEVOR 2.5 Ton jack reaches 14.96 inches.

Choose this jack for garage maintenance on a car within its 2-ton capacity and 5.1-to-13-inch range. Its stated guidance rules out pickups, trucks, and oversized SUVs, and the maximum height is limited.

Listed on Amazon as: DNA Motoring TOOLS-00234 Low Profile Hydraulic Trolley Service/Floor Jack, 2 Ton (4000 lbs) Capacity, Lifting Range 5.1"-13", Black