Best Jack Tray For 4 Post Lift: Compare Seven Options

#1 · Best Overall

1. KATOOL RJ-50W

• Load Capacity: 5000 lb
• Dimensions: 25 x 41 x 15 in
• Compatible with Vehicle Type: Car

Best for: Low-clearance wheel-service jack.

Why it ranks #1: Rated for 5,000 pounds, it has three locking positions and 5.3-inch lowered pads; listed compatibility is specifically KT-4H110 and 4H850.

A 5.3-inch lowered pad height lets the KATOOL rolling bridge jack slide beneath vehicles on a compatible four-post lift, while adapters extend its maximum pad height to 18.3 inches. Its 5,000-pound capacity and three locking positions support wheel and brake work without moving the vehicle off the lift.

The hydraulic hand pump raises the jack, and its four pulleys let it roll along the lift for front- or rear-wheel access. Two large rubber pads provide vehicle contact, while three locking height positions give operators set stopping points during lifting. The 5,000-pound capacity suits many car-service tasks, and the low lowered height aids access beneath vehicles. The listing specifically identifies KT-4H110 and 4H850 lifts, so compatibility beyond those models is not established here.

Skip it if you need a jack explicitly listed for another lift; the ATLAS XH-PROJACK35 instead names Atlas Garage Pro 8000 and 9000 compatibility.

Choose this KATOOL for wheel or brake service on a KT-4H110 or 4H850 four-post lift, especially when low pad clearance matters. Its 5,000-pound rating and listed compatibility should guide the fit decision.

Listed on Amazon as: Rolling Jack Bridge Jack for KT-4H110/4H850 Four Post Lifts with 5000Lbs Lifting Capacity

#2 · Adjustable-Width Pick

2. Atlas XH-PROJACK35

• Load Capacity: 3500 lb
• Dimensions: 23 x 37 x 10 in
• Compatible with Vehicle Type: Truck
• Material: Alloy Steel

Best for: Adjustable-width truck-service jack.

Why it ranks #2: Its 3,500-pound capacity, adjustable width for many four-post lifts, and included four-piece truck adapter set suit varied compatible setups.

Adjustable width lets the ATLAS XH-PROJACK35 fit many four-post lifts, making it a flexible sliding bridge jack for wheel service. Its 3,500-pound capacity, manual hand pump, and included four-piece truck adapter set equip the jack for lifting work without requiring a powered pump.

The hand-operated hydraulic pump gives the operator manual control over lifting, while a scissor mechanism raises the vehicle level. Adjustable width helps the jack accommodate many four-post lift layouts, and the included four-piece truck adapter set adds contact options for truck applications. Its 3,500-pound capacity defines the load limit. The listing specifically names Atlas Garage Pro 8000 and 9000 compatibility for the RJ-35, but does not establish fit for every four-post lift.

Skip it if you need more than 3,500 pounds of capacity; the KATOOL RJ-50W is rated for 5,000 pounds on its listed compatible lifts.

Choose the ATLAS for truck wheel service when adjustable width, manual operation, and included adapters match your setup. Its 3,500-pound capacity and named Atlas Garage Pro compatibility should factor into the vehicle and lift fit.

Listed on Amazon as: Atlas Automotive XH-PROJACK35 3,500 Capacity Sliding Bridge Jack

#3 · Model-Specific Pick

3. Triumph SJ35

• Load Capacity: 3500 lb
• Dimensions: 24 x 39 x 16.5 in
• Compatible with Vehicle Type: Car
• Material: Alloy Steel

Best for: Triumph-lift bridge jack.

Why it ranks #3: This 3,500-pound bridge jack has three locking positions and a 4.75-inch lowered pad height, with listed fit for several Triumph lifts.

A 4.75-inch lowered pad height helps the TRIUMPH SJ35 reach beneath vehicles, while adapters extend its maximum pad height to 16.5 inches. This 3,500-pound bridge jack uses a manual hydraulic pump and three locking height positions for wheel-service lifting on a compatible four-post setup.

The manual hydraulic pump raises the jack without a powered motor, and three locking positions provide defined raised settings. Its 4.75-inch lowered height and 16.5-inch maximum height with adapters describe the working range for vehicle access and lift. The jack requires approximately 38 inches between runways. Compatibility is identified for current Triumph 8,000-pound four-post parking storage lifts, NSS8SQ Classic, NSS8, and NSS8XLT; fit with other brands is not guaranteed.

Skip it if you need a jack with explicitly listed non-Triumph lift compatibility; the KATOOL RJ-50W names KT-4H110 and 4H850 models.

The SJ35 suits owners of listed Triumph four-post storage lifts who need manual bridge-jack support for wheel service. Check the approximately 38-inch runway spacing and listed model compatibility before selecting it.

Listed on Amazon as: Triumph SJ35 Bridge Jack Lift 3500 lbs for Four Post Auto Lift

#4 · Tray-Included Lift

4. KATRAX KT-4H950 Lift

Best for: Extra-wide truck storage lift.

Why it ranks #4: This complete 9,500-pound four-post lift lists a jack tray among its included features, but it is a lift package rather than a standalone jack.

An extra-wide 113-inch layout gives the KATRAX KT-4H950 room for full-size trucks and SUVs, with a listed 9,500-pound capacity. The four-post lift also includes a jack tray, ramp, drip tray, and casters, bringing storage and service equipment together in one setup.

The 9,500-pound capacity and extra-wide 113-inch design are specified for large vehicles, including full-size trucks and SUVs. A maximum lifting height listed as 81 inches in the features provides the stated clearance for raised-vehicle work. Four posts have primary and secondary mechanical locks, with a single-point manual release. The 3.0 HP, 110V/60Hz motor identifies its power specification; verified information calls for direct connection to a power source rather than relying on a wall socket.

Skip it if you need a standalone bridge jack instead of a complete lift; the KATOOL RJ-50W is a 5,000-pound rolling jack for specified four-post models.

This KATRAX is suited to spacious garages or shops storing and servicing wide trucks and SUVs. Its 113-inch design and 9,500-pound capacity are key fit points; account for its direct-power requirement when planning installation.

Listed on Amazon as: KT-4H950 110V 3.0HP Four Post Lift, Car Truck Parking Lift 9500Lbs Capacity, with Casters, Jack Tray, Ramp, Drip Tray, Max Lifting Height 84.5 Inch Extra Wide 113 Inch

#5

5. KATOOL 4-H95 Lift

• Load Capacity: 9500 lb
• Dimensions: 186 x 30 x 23 in
• Compatible with Vehicle Type: Universal Fit
• Material: Alloy Steel

Best for: Home-garage storage lift.

Why it ranks #5: The 9,500-pound lift listing includes a jack tray and caster moving kit; it is relevant as a full lift package, not as a replacement jack.

An 84-inch maximum lifting height gives the KATOOL 4-H95 four-post lift substantial clearance for vehicle storage and service. Its 9,500-pound capacity and included oil tray, jack tray, aluminum ramp, and moving casters make it a full lift package rather than a standalone jack tray.

The 9,500-pound capacity supports the lift’s stated vehicle-use range, while the 84-inch maximum height defines clearance beneath a raised vehicle. Aluminum ramps provide the drive-on route, and the included oil tray and jack tray add service-oriented equipment. Casters are listed for moving the lift, supporting repositioning when needed. The lift uses a 3.0 HP, 110V setup, but the supplied verified information says it should connect directly to a power source rather than rely on a wall socket.

Skip it if you need a bridge jack alone; the TRIUMPH SJ35 is a separate 3,500-pound jack with a manual hydraulic pump.

Pick this KATOOL for a garage or service space needing a complete four-post lift with an included jack tray, ramp, and casters. The 84-inch height and direct-power requirement are important installation considerations.

Listed on Amazon as: KATOOL 9500lbs Heavy Duty 4/Four Post Car Lift 3.0HP Lifting Capacity, 84" Max Lifting Height, Aluminum Ramp, with Caster(Moving Kit) Oil Tray Jack Tray, Storage Parking Car Lift Home Service, 110v

#6

6. Motool KT-4H950 Lift

• Material: Alloy Steel, Aluminum

Best for: Heavy-vehicle storage lift.

Why it ranks #6: This 9,500-pound four-post lift listing includes a jack tray, ramps, and drip trays, but does not serve as a standalone bridge jack.

A 9,500-pound capacity paired with a 79-inch maximum lifting height gives the Motool KT-4H950 room for heavy vehicle storage, maintenance, and detailing. The four-post lift includes ramps, casters, and drip trays, combining vehicle elevation with practical supporting equipment for shop or garage use.

Four mechanical locks, arranged as primary and secondary safety devices, secure the lift at its raised position; a single-point manual release simplifies unlocking. Its 110V, 60Hz, 3.0 HP power specification identifies the electrical setup, while the 79-inch maximum height sets the available clearance for work beneath a raised vehicle. Included casters support transport, and ramps and drip trays come with the lift. Buyers must arrange forklift or tractor unloading.

Skip it if you need a bridge jack rather than a complete lift; the TRIUMPH SJ35 is a 3,500-pound bridge jack with a manual pump.

This Motool suits shops and home garages seeking a complete four-post lift for heavy-vehicle storage or service, with included ramps and trays. Plan for the 79-inch height and forklift or tractor unloading before delivery.

Listed on Amazon as: KT-4H950 3.0 HP Heavy Duty with Oil Tray, Jack Tray 81.5'' lifting Height 4 Post Car Lift Auto Parking Lift Aluminous Ramp with Casters

#7

7. Yuudar Horizontal Jack Tray

• Load Capacity: 8E+3 lb
• Dimensions: 4.5 x 4.5 x 0.5 in
• Compatible with Vehicle Type: Car, Light Truck, Sport Utility Vehicle
• Material: Alloy Steel, Rubber

Best for: Replacement tray for 3–4 ton jacks.

Why it ranks #7: It is a replacement-style tray for 3–4-ton applications with mounting hardware, but the listing does not establish compatibility with four-post lifts.

A horizontal support surface gives the Yuudar jack tray a role in 3- to 4-ton jack applications, supporting vehicle maintenance and towing tasks. Its alloy-steel and rubber construction combines a firm structural material with a contact surface, and mounting hardware is included for fitting the tray to a compatible setup.

The horizontal design provides a stable positioning surface during car repairs or towing, according to the listing. Alloy steel supplies the tray’s structural material, while rubber is also listed in its construction; together, these materials make it a distinct replacement accessory rather than a complete lifting jack. Mounting hardware comes in the package, but the supplied details do not identify specific jack models or explain a particular attachment method. Check the stated 3- to 4-ton application against your jack.

Skip it if you need a complete bridge jack; the ATLAS XH-PROJACK35 includes a manual pump, adjustable width, and truck adapters.

Consider the Yuudar when replacing or adding a horizontal tray for a 3- to 4-ton jack used in car repair or towing. Its listing does not name compatible jack models, so verify the application from the provided specifications.

Listed on Amazon as: Horizontal Jack Tray Heavy Duty Jack Spare Part Jack Accessories Spare Part Support Top Repair Car Towing for 3T 4T Car (New Tray)