Best Leveling Kits For Jeeps for Wrangler and Gladiator

#1 · Best Overall

1. TeraFlex 1155200 JK Kit

• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: JK owners correcting factory rake.

Why it ranks #1: For JK and JKU Wranglers, it adds two inches front and one inch rear, lists tire sizing, and includes front sway bar links.

A staggered lift of 2 inches in front and 1 inch in the rear targets the factory nose-down rake on JK and JKU Wranglers. TeraFlex lists clearance for tires up to 305/65 R18 or 305/70 R17, giving owners a concrete tire-size reference alongside the more balanced stance.

The kit pairs coil spacers with front sway bar links, so the front lift and a related suspension component are covered together. TeraFlex identifies the application as JK/JKU Wrangler and says the added height corrects the factory rake while clearing larger tires. The stated maximum tire sizes—305/65 R18 or 305/70 R17—help buyers plan a wheel-and-tire change, while the included instructions support the installation workflow.

Skip it if you own a Gladiator or Wrangler JL; this kit is listed for JK and JKU Wranglers.

Pick this TeraFlex kit if your JK or JKU needs a rake-correcting lift and you want the listed tire-size guidance before upgrading. Its front-and-rear lift amounts differ, so it is not a uniform-height setup.

Listed on Amazon as: TeraFlex 1155200 JK Leveling Kit

#2 · Best Full Kit

2. Rough Country JT 63400

• Material: Alloy Steel, High Carbon Steel, Rubber, Zinc
• Material Type: Alloy Steel, High Carbon Steel, Rubber, Zinc

Best for: Gladiator trail clearance upgrade.

Why it ranks #2: This Gladiator-specific 2.5-inch kit includes bump stops, coil spacers, hardware, and sway bar links for a more complete listed setup.

A 2.5-inch lift paired with coil spring spacers and sway bar links gives the 2020–2024 Gladiator JT added ground clearance for obstacles and a level front-to-rear stance. Rough Country also says the kit maintains a smooth, factory-like ride, making it a fit for owners seeking more clearance without replacing the ride setup wholesale.

The included bump stops, coil spring spacers, sway bar links, and hardware form a suspension-focused package, while the bolt-on installation is presented as manageable at home. Added clearance supports obstacle travel, and the level stance changes the factory profile. Rough Country describes the ride as smooth and factory-like, so the kit aims to preserve everyday comfort alongside trail utility. Its stated Gladiator JT application makes this a focused choice rather than a universal Jeep spacer kit.

Skip it if you need a lift for a Wrangler rather than a Gladiator JT; this kit is listed for 2020–2024 Gladiators.

Choose this kit if your 2020–2024 Gladiator JT needs a 2.5-inch lift, a level stance, and added obstacle clearance while retaining a factory-like ride. Its listed application is limited to the Gladiator JT.

Listed on Amazon as: Rough Country 2.5" Leveling Lift Kit for 2020-2024 Jeep Gladiator JT – 63400

#3 · Best Tire Guidance

3. TeraFlex JT 1155300

• Material: plastic
• Material Type: plastic

Best for: Gladiator owners running larger tires.

Why it ranks #3: Its 1.5-inch Gladiator front spacer kit specifies tire limits by fender type and flags a backspacing-related bump-stop requirement.

A 1.5-inch front spacer lift gives the JT Gladiator added tire clearance while retaining a family-friendly setup, according to TeraFlex. The listed tire limits reach 33 inches with Sport or Overland fenders and 35 inches with Rubicon fenders, helping buyers match the kit to their trim and wheel setup.

The kit includes four spring spacers, bump stops, hardware, and instructions, but no shock absorbers, so buyers keep the shock setup separate. Its fender-specific tire limits offer a useful planning guide: up to 33 inches for Sport or Overland and 35 inches for Rubicon, with stock wheel backspacing. Wheels with less than stock backspacing require at least 0.5-inch rear bump stop strike pad extensions to avoid inner-fender rubbing at full compression; those extensions are not included.

Skip it if you need included shocks or rear extensions for wheels with less than stock backspacing; neither comes in this kit.

This suits JT Gladiator owners seeking a 1.5-inch front lift and planning tire size around their fenders. Check the stated backspacing condition: non-stock wheels need separate rear bump stop strike pad extensions.

Listed on Amazon as: TeraFlex 1155300 JT: 1.5” Performance Spacer Leveling Kit – No Shock Absorbers

#4 · Best 35-Inch Fit

4. Rough Country JT 61300

• Material: Alloy Steel, High Carbon Steel, Rubber, Zinc
• Material Type: Alloy Steel, High Carbon Steel, Rubber, Zinc

Best for: Newer Gladiators retaining factory shocks.

Why it ranks #4: The Gladiator kit offers 2.5 inches of lift, states clearance for tires up to 35 inches, and retains factory shocks and coils.

A 2.5-inch lift that retains the factory shocks and coils gives 2024–2025 Gladiator JT owners extra clearance without replacing those components. Rough Country lists room for tires up to 35 inches and a leveled stance, making the kit relevant to buyers planning both a profile change and larger tires.

The coil spring spacers, bump stops, sway bar links, and hardware support the lift while the kit is described as an upgrade to factory components, retaining the Gladiator’s shocks and coils. That can simplify component choices for owners who want to preserve the factory ride setup. The claimed 2.5-inch lift adds ground clearance and approach-angle improvement, while the stated tire capacity reaches 35 inches. Bolt-on installation is another practical feature noted in the title.

Skip it if you want replacement shocks included; this kit retains your factory shocks and coils instead.

This suits 2024–2025 Gladiator JT owners seeking 2.5 inches of lift, up to 35-inch tire clearance, and retention of factory shocks and coils. Buyers wanting new shocks in the package should look elsewhere.

Listed on Amazon as: Rough Country 2.5 Inch Leveling Kit for Jeep Gladiator JT (2024-2025) – No Shocks, Fits Up to 35" Tires, Easy Bolt-on Install

#5

5. FLYCLE JL 2.5-Inch Kit

• Material: 6061-T6 aluminum alloy
• Material Type: 6061-T6 aluminum alloy

Best for: JL owners targeting 35-inch tires.

Why it ranks #5: This kit is listed for four-wheel-drive JL Wranglers and uses 6061-T6 aluminum alloy; its listing says it accommodates 35-inch tires.

CNC-processed 6061-T6 aluminum alloy spacers give this FLYCLE kit a defined material and manufacturing approach for 2018–2023 Wrangler JL 4WD models. The 2.5-inch lift is intended to add ground clearance and room for 35-inch tires, connecting the height change directly to a larger-tire upgrade.

The 2.5-inch lift increases clearance and is listed to accommodate 35-inch tires, making it relevant to JL owners planning both obstacle clearance and a larger tire package. FLYCLE specifies forged 6061-T6 aluminum alloy with CNC automatic processing and an anodized surface, details that describe the spacer construction and finish. The stated fitment is specifically Wrangler JL 4WD from 2018 through 2023, so the application is narrower than a general Jeep kit.

Skip it if you have a Gladiator, JK, or a JL outside the listed 2018–2023 4WD application.

This is for JL 4WD owners planning a 2.5-inch lift and tires up to 35 inches. Its stated fitment covers 2018–2023 models, so buyers with other Jeep platforms need a different application-specific kit.

Listed on Amazon as: Flycle 2.5'' Inch Leveling Lift Kits for Jeep Wrangler JL 4WD, 2.5 Inch Leveling Lift Kit Suitable for 2018-2023 Jeep Wrangler JL 4WD

#6

6. RYANSTAR JK Lift Kit

• Material: Alloy Steel, Polyurethane (PU)
• Material Type: Alloy Steel, Polyurethane (PU)

Best for: JK owners leveling for 33-inch tires.

Why it ranks #6: For JK Wranglers, it adds two inches front and one inch rear and is described as accommodating tires up to 33 inches.

A 2-inch front and 1-inch rear lift directly addresses the factory rake on 2007–2018 Wrangler JK models while creating room for tires up to 33 inches. RYANSTAR also ties the added height to increased ground clearance, giving this kit a practical mix of stance correction and rough-terrain clearance.

The staggered lift is intended to create a more balanced profile rather than raising both ends equally, and the listed 33-inch tire capacity gives buyers a clear upgrade target. RYANSTAR specifies compatibility with 2007–2018 Jeep Wrangler JK and includes installation hardware. Alloy steel and polyurethane are the stated materials, pairing the metal and polymer components in a kit aimed at added clearance and a level stance.

Skip it if you own a JL, JKU, or Gladiator; this product’s stated compatibility is for 2007–2018 Wrangler JK.

This fits JK owners who want to correct rake, gain ground clearance, and run tires up to 33 inches. Its stated vehicle coverage is specifically 2007–2018 Wrangler JK, which limits its appeal beyond that platform.

Listed on Amazon as: RYANSTAR 2" Front&1" Rear Lift Kit Compatible with 07-18 Jeep Wrangler JK

#7 · Broadest Listed Fit

7. BIG DAVE'S Spring Spacer

• Material: Urethane
• Material Type: Urethane

Best for: Multi-generation owners seeking a mild lift.

Why it ranks #7: Its one-inch front spacer is listed for JK, JL, and JT vehicles, with a urethane construction and a five-year warranty.

A one-inch front spacer that installs between the factory coil spring isolator and frame levels the stance without permanent modifications. BIG DAVE’S lists compatibility across Wrangler JK, Wrangler JL, and Gladiator JT generations, making this a mild-height option for owners whose vehicle falls within those stated ranges.

The urethane spacers add one inch of front ride height, a modest change aimed at correcting stance rather than creating a tall lift. Installation between the factory coil spring isolator and frame avoids permanent modifications, and the listed process calls for a jack and wrenches with a 2–4 hour installation time. The set includes two front spacers and covers specified JK, JL, and JT model-year ranges, giving multi-generation Jeep owners a clearly bounded fitment list.

Skip it if you need more than one inch of lift or a rear lift component; this set adds height only at the front.

Choose this for a mild front stance correction on a listed JK, JL, or JT, especially if avoiding permanent modifications matters. Its one-inch front-only lift is not a substitute for a larger or balanced lift.

Listed on Amazon as: 1" Front Spring Spacer Leveling Kit, Compatible with Jeep Wrangler JK 2007-2018, JL 2018-2026, Gladiator JT 2020-2026

#8

8. maXpeedingrods JK 3-Inch Kit

Best for: JK owners wanting a three-inch lift.

Why it ranks #8: This JK and JKU kit raises both front and rear three inches and lists shock extender brackets and brake line brackets among its components.

Three inches of lift at both the front and rear gives this maXpeedingrods kit a uniform-height approach for 2007–2018 Wrangler JK and JKU models. Its listed components include spring spacers and shock and brake-line brackets, supporting a broader suspension installation than a spacer-only package.

The application covers 2WD and 4WD JK and JKU Wranglers from 2007–2018, while explicitly excluding the 2018 JL. A 3-inch front and rear lift raises both ends equally, and the high-strength carbon steel construction has a golden powder-coated finish specified to resist corrosion and rust. Included front coil spring spacers, rear shock extender brackets, front shock brackets, and brake line brackets give the installer several suspension-related pieces in one kit.

Skip it if you own a 2018 JL or need a different lift height; the listed application is JK and JKU only.

Consider this for a 2007–2018 JK or JKU owner seeking a uniform three-inch lift and a kit with shock and brake-line brackets. The stated exclusion of 2018 JL models is a firm fitment boundary.

Listed on Amazon as: maXpeedingrods 3" Front & Rear Lift Kit for Jeep Wrangler JK JKU 2007-2018

#9

9. Tavaski 1.5-Inch Spacer

• Material: Polyurethane (PU)
• Material Type: Polyurethane (PU)

Best for: Jeep owners seeking polyurethane front spacers.

Why it ranks #9: Its polyurethane front spacer set claims fit across JK, JL, and JT, but the listing provides less precise vehicle-fit detail than model-specific alternatives.

A 1.5-inch front spacer set made from flexible polyurethane aims to add clearance and absorb some vibration and impact. Tavaski lists fitment for Wrangler and Gladiator JK, JL, and JT models, making the broad platform range a central consideration for buyers seeking a front-height adjustment.

The front lift raises the vehicle by 1.5 inches, with the stated purpose of increasing ground clearance and creating space for larger tires. Tavaski also describes the polyurethane as flexible and intended to absorb vibration and impacts, linking the material choice to a smoother-feeling ride over bumps. The fitment title names Wrangler and Gladiator JK, JL, and JT, but provides no model-year ranges, so buyers should use the listed platform names when assessing application.

Skip it if you need stated model-year coverage before choosing; this listing names platforms but gives no year ranges.

Consider this set if your Wrangler or Gladiator is among the named JK, JL, or JT platforms and you want a 1.5-inch polyurethane front lift. Model-year fitment is not specified in the supplied details.

Listed on Amazon as: 1.5 In Front Spring Spacer Set Fit for Jeep Wrangler Gladiator JK JL JT

#10

10. maXpeedingrods WK2 Kit

Best for: Grand Cherokee WK2 owners leveling the front.

Why it ranks #10: This two-inch front kit is specifically for Grand Cherokee WK2 models and excludes air-ride suspension, limiting its fit to a different Jeep platform.

A two-inch front lift targets the stance and extra clearance needs of 2011–2022 Jeep Grand Cherokee WK2 owners. maXpeedingrods says the kit can accommodate tire and rim upgrades while retaining factory ride quality, but its explicit air-ride exclusion makes suspension type the key fitment check.

The included strut spacers and instructions provide the listed installation pieces for raising the front end, which maXpeedingrods says improves the leveled appearance and adds clearance for rough roads. The two-inch front lift is intended to support tire and rim upgrades while retaining factory ride quality. Fitment is limited to WK2 Grand Cherokees from 2011–2022, and air-ride suspension models are expressly excluded, so suspension configuration matters before choosing it.

Skip it if you have air-ride suspension or a Jeep platform other than the listed 2011–2022 Grand Cherokee WK2.

This is for WK2 Grand Cherokee owners seeking a two-inch front lift for stance and clearance while retaining factory ride quality. It is not suitable for air-ride suspension models, a key boundary to check.

Listed on Amazon as: maXpeedingrods 2" Front Leveling Kit for Jeep Grand Cherokee WK2 2011-2022