Best Motorcycle Lifts For Trucks: Compare Seven Lift Stands

#1 · Best Overall

1. VIVOHOME 1100 lb Red Scissor Jack

• Dimensions: 14.6 x 9 x 3.5 in
• Weight: 12.5 kg
• Load Capacity: 1100 lb
• Material: Alloy Steel

Best for: Heavy-bike garage maintenance.

Why it ranks #1: Its 1100-pound capacity and 3.5- to 14.5-inch range suit many maintenance tasks, while adjustable screw adapters help balance it on uneven floors.

A 1,100-pound capacity gives the VIVOHOME scissor jack room to lift many motorcycles and ATVs, while its 3.5-to-14.5-inch range supports access for engine, transmission, and wheel work. The wide anti-slip platform and adjustable screw adapters add practical support when positioning a bike for maintenance.

The reinforced crank handle operates the lift manually, so height adjustments can be made at the bike rather than relying on a powered system. Its 3.5-inch minimum height suits bikes with limited clearance, while the 14.5-inch maximum provides working room for listed maintenance tasks. Adjustable screw adapters help balance the jack on uneven floors, and the wide anti-slip platform supplies a larger contact surface. The steel construction and 1,100-pound capacity suit heavier motorcycles and ATVs within the stated limit.

Skip it if you need a lift higher than 14.5 inches; the VEVOR 350-pound hydraulic table reaches 36 inches for lighter off-road bikes.

Choose this VIVOHOME for motorcycle or ATV maintenance where a wide anti-slip deck, manual crank control, and up to 1,100-pound capacity matter. Check that its 14.5-inch maximum height suits the work and your available clearance.

Listed on Amazon as: VIVOHOME 1100 LBS Motorcycle Lift Scissor Jack, Wide Deck Hoist Stand, Red

#2 · Highest Capacity

2. VIVOHOME 1500 lb Hydraulic Lift

• Dimensions: 14 x 27.5 x 15 in
• Weight: 59.4 lb
• Load Capacity: 1500 lb
• Material: Alloy Steel, Rubber

Best for: Hydraulic lift for heavier bikes.

Why it ranks #2: The 1500-pound rating is the highest here, and foot-pedal hydraulics lift from 4.5 to 14.8 inches; check the stated minimum clearance.

A 1,500-pound capacity and foot-pedal hydraulic system distinguish this VIVOHOME lift for owners who want hands-free pumping rather than a crank. Its 4.5-to-14.8-inch range supports service access, while compatibility is stated for motorcycles, dirt bikes, and ATVs meeting its clearance requirement.

The foot-pedal hydraulic system raises the platform without a hand crank, helping keep both hands available around the bike during lifting. Its 1,500-pound capacity exceeds the listed 1,100-pound scissor models, while the 4.5-to-14.8-inch adjustment range offers access for tires, chains, forks, and undercarriage work. Compatibility applies to vehicles with at least 4.5 inches of ground clearance, and full lower fairings are specifically excluded. Two straps are included for the lifting setup.

Skip it if you have a bike with full lower fairings or less than 4.5 inches of ground clearance; those fit limits rule out this lift.

This VIVOHOME fits owners seeking hydraulic, foot-pedal lifting for a motorcycle, dirt bike, or ATV within its capacity. It requires at least 4.5 inches of clearance and does not suit models with full lower fairings.

Listed on Amazon as: VIVOHOME 1500 LBS Hydraulic Motorcycle Lift Jack

#3 · Hand-Tool Flexibility

3. OMT 1100 lb Scissor Jack

• Dimensions: 1.57 x 10.24 x 4.33 in
• Weight: 12.8 kg
• Load Capacity: 1100 lb.
• Material: Rubber, Steel

Best for: Manual-control repair setup.

Why it ranks #3: This 1100-pound jack lifts from 3.7 to 14.6 inches and supports operation with its T-handle or a 3/8-inch socket and ratchet.

The OMT jack offers two ways to turn its lift: a T-handle or a 3/8-inch socket and ratchet. That choice lets motorcycle owners select hand or ratchet operation while raising bikes from 3.7 to 14.6 inches, with capacity up to 1,100 pounds.

The 3/8-inch socket and ratchet option gives owners an alternative to the included T-handle when raising the jack, while the 3.7-to-14.6-inch range provides adjustable working height. It supports motorcycles up to 1,100 pounds and includes a safety bar, adding a dedicated securing component to the maintenance setup. The package also lists a chain brush and gloves, which can keep basic chain-cleaning supplies and hand protection alongside the lift. Manual operation is recommended to extend screw life and prevent wear.

Skip it if you want a hydraulic foot-pedal lift; the VIVOHOME VH049 provides foot-powered lifting for compatible bikes with at least 4.5 inches of clearance.

Pick the OMT for motorcycle repairs where adjustable height, a choice of hand or ratchet operation, and an included safety bar are useful. Keep its manual-operation recommendation in mind when choosing a lift for regular garage work.

Listed on Amazon as: OMT 1100lb Motorcycle Scissor Lift Jack Wide Deck Motorbike Hoist Stand

#4

4. VEVOR 1100 lb Scissor Jack

• Dimensions: 18.1 x 11 x 3.9 in
• Weight: 26 lb
• Load Capacity: 1100 lb
• Material: Steel

Best for: Street and touring bike lifting.

Why it ranks #4: It handles up to 1100 pounds and lists a safety pin, giving buyers a manual jack with a specified locking feature for garage maintenance.

A safety pin pairs with the VEVOR jack’s 1,100-pound rating to support lifting street, cruiser, and touring motorcycles for garage maintenance. Its 3.7-to-13.8-inch range and wide deck provide a manual center-lift setup without requiring extra tools for operation.

The steel scissor mechanism uses a crank to raise bikes through a 3.7-to-13.8-inch range, giving owners adjustable access for maintenance and cleaning. A wide deck spreads the support area beneath compatible street, cruiser, and adventure touring motorcycles, while the listed 1,100-pound capacity covers heavier bikes within that limit. The safety pin adds a securing step once raised. This version is specified without casters, so it is a stationary lift rather than a rolling dolly setup.

Skip it if you need to roll the lift and motorcycle around your garage; VEVOR’s M110203 version includes casters and a dolly.

This VEVOR suits owners lifting street, cruiser, or touring motorcycles for cleaning and maintenance on a fixed garage spot. Its stated capacity is 1,100 pounds, but the no-caster configuration is not for rolling a raised bike around.

Listed on Amazon as: VEVOR Motorcycle Lift, 1100 LBS Motorcycle Scissor Lift Jack with Wide Deck & Safety Pin, 3.7"-13.8" Center Hoist Crank Stand, Steel Scissor Jack for Street Bikes, Cruiser Bikes, Touring Motorcycles

#5 · Built-In Mobility

5. VEVOR 1100 lb Dolly Jack

• Dimensions: 18.1 x 17.3 x 4.9 in
• Weight: 41 lb
• Load Capacity: 1100 lb
• Material: Steel

Best for: Rolling garage lift for touring bikes.

Why it ranks #5: This 1100-pound scissor jack includes casters and a tool tray, useful for repositioning the stand in a garage, though it weighs 41 pounds.

A dolly with casters distinguishes this 1,100-pound VEVOR scissor lift for owners who want a rolling setup around the garage. Its wide deck and hand crank serve street, cruiser, and touring motorcycles, while the included tool tray keeps tools close during maintenance.

The steel scissor jack supports up to 1,100 pounds and uses a hand crank for lifting compatible street, cruiser, and touring motorcycles. Unlike a stationary configuration, this version includes a dolly with casters, making rolling repositioning part of its garage workflow. The wide deck provides a broad support surface, and the tool tray keeps maintenance tools nearby while working. At 41 pounds, it is a substantial lift assembly, so consider its listed weight when handling or storing the equipment.

Skip it if you need a lighter lift to carry or store; the VIVOHOME VH012 is listed at 12.5 kilograms and has no dolly specified.

This VEVOR suits owners of street, cruiser, or touring bikes who value a dolly, casters, and a nearby tool tray. Its 1,100-pound limit and 41-pound lift weight are relevant considerations for fit and handling.

Listed on Amazon as: VEVOR Motorcycle Lift 1100lbs ATV Scissor Lift Jack with Dolly & Hand Crank | Garage Repair Center Hoist Crank Stand with Wide Deck and Tool Tray for Street Bikes, Cruiser Bikes, Touring Motorcycles

#6

6. VIVOHOME 1100 lb Black Scissor Jack

• Dimensions: 14.4 x 9 x 14.5 in
• Weight: 27.5 lb
• Load Capacity: 1100 lb
• Material: Steel + Rubber

Best for: Adjustable support on uneven floors.

Why it ranks #6: Its 1100-pound capacity and 3.5- to 14.5-inch range match the red model, with included adjustable plates and a listed 12-month warranty.

Adjustable screw adapters help this VIVOHOME scissor jack balance on uneven floors, a useful distinction for garage lifting. Its reinforced crank raises motorcycles, dirt bikes, snowmobiles, or trikes up to 1,100 pounds through a 3.5-to-14.5-inch range for maintenance access.

The reinforced crank handle controls lifting and lowering, so owners can make manual height adjustments across the 3.5-to-14.5-inch range. That low starting height and 1,100-pound capacity suit a broad range of listed motorcycles, while the adjustable screw adapters help balance the jack on uneven floors. A wide anti-slip platform supplies the contact surface beneath the vehicle. The listed compatibility includes dirt bikes, motorcycles, snowmobiles, and trikes, and the package includes two adjustable plates.

Skip it if you need a work platform that reaches 36 inches; the VEVOR 350-pound hydraulic table reaches that height for lighter off-road bikes.

Choose this VIVOHOME for motorcycle, dirt-bike, snowmobile, or trike maintenance where adjustable balancing and a wide anti-slip platform matter. Its 14.5-inch maximum height remains a boundary for taller-access service tasks.

Listed on Amazon as: VIVOHOME 1100LBS Motorcycle Lift Scissor Jack, Wide Deck Hoist Stand, Black

#7 · Tallest Lift Range

7. VEVOR 350 lb Hydraulic Table

• Dimensions: 19.1 x 18.5 x 15.8 in
• Weight: 63 lb
• Load Capacity: 350 lb
• Material: Steel

Best for: High-reach off-road bike service.

Why it ranks #7: The 13.8- to 36-inch range suits some off-road maintenance, but its 350-pound capacity is far below the other listed lifts.

A 36-inch maximum lift height gives this VEVOR table a taller working position than low-profile center jacks, making it useful for compatible off-road motorcycles. The hydraulic foot pedal raises the platform through a 13.8-to-36-inch range, with a 350-pound capacity and four wheels.

The foot-operated hydraulic mechanism raises the deck through a 13.8-to-36-inch range, providing elevated access for servicing compatible dirt bikes and ATVs. Its 350-pound limit makes vehicle weight a key fit check, particularly compared with higher-capacity motorcycle jacks. Four wheels support a mobile-table format, while the supplied J-hook is part of the setup. The steel scissor structure and worm gear transmission are specified alongside the hydraulic operation, giving the lift a substantial mechanical lifting assembly for off-road bike maintenance.

Skip it if you need to lift a motorcycle over 350 pounds; the VEVOR M110203 scissor lift supports up to 1,100 pounds.

Choose this VEVOR when a taller service position and foot-pedal hydraulic operation suit your off-road bike workflow. Its 350-pound capacity is the boundary: confirm the motorcycle or ATV falls within that limit before selecting it.

Listed on Amazon as: VEVOR Hydraulic Motorcycle Lift Table, 350 lbs Capacity Motorcycle Scissor Jack Lift with Wide Deck, J-Hooks, 4 Wheels, Hydraulic Foot-Operated Jack Stand for ATV Dirt Bikes