Best Ramp For Motorcycle On Pickup: 10 Options Compared

#1 · Best Overall

1. FACHNUO TOOL 10FT Ramp

• Dimensions: 120"L x 18"W x 2"H
• Weight: 17 lb
• Load Capacity: 1500 lb
• Material: Aluminum

Best for: Long ramp with load straps.

Why it ranks #1: Its 120-inch length, 18-inch width, 1,500-pound capacity, and included heavy-duty load straps make it a well-equipped pickup-loading option.

At 120 inches long, the FACHNUO TOOL ramp offers a longer approach for loading motorcycles and other listed equipment into trucks or trailers. Its 1,500-pound per-ramp capacity, four-arched-beam construction, and included heavy-duty load straps combine a substantial rating with added securing hardware.

The 10-foot aluminum ramp provides an 18-inch width and a 1,500-pound capacity for one ramp; the product states that two together support up to 3,000 pounds. Its four-arched-beam design is specified for durability, while included heavy-duty straps help prevent slipping or collapse during loading. The longer length affects how much room the setup and storage require, so check the available approach and storage area alongside equipment weight before use.

Skip it if you have limited room to store a 10-foot ramp; Gorkett's 72.4-inch ramp folds to 37.8 inches.

Consider this FACHNUO TOOL for buyers needing a long ramp and a stated 1,500-pound single-ramp capacity for truck or trailer loading. Its 120-inch length and 18-inch width require room for both deployment and storage.

Listed on Amazon as: FACHNUO 10FT Motorcycle Ramp for Pickup Trucks, 1500lbs Capacity 1PC

#2 · Best Lightweight

2. VENDAV 7.5 ft Ramp

• Dimensions: 88.98"L x 12.01"W x 2"H
• Weight: 15.5 lb
• Load Capacity: 750 lb
• Material: Aluminum

Best for: Narrow motorcycle loading.

Why it ranks #2: This motorcycle-focused single ramp weighs 15.5 pounds, measures about 89 by 12 inches, and supports up to 750 pounds.

An approximately 11-inch wheel path between the side rails gives this VENDAV ramp a defined route for single-track loading into a pickup or trailer. Its 89-inch length and 750-pound capacity suit buyers seeking one portable ramp for a motorcycle, dirt bike, bicycle, or other narrow load.

The single-ramp format aligns with two-wheel equipment, while the 89-by-12-inch surface gives the tire a clear path during loading. At 15.5 pounds, the aluminum ramp is manageable to carry for occasional use, and its 750-pound rating applies when the load is evenly distributed. It can also serve hand trucks and dollies, adding utility beyond motorcycles. Check the equipment's weight and tire path, since this is a narrow, single-track ramp rather than a broad platform.

Skip it if you need a broad platform for a four-wheel vehicle; GarveeTech's 76-by-50-inch tri-fold ramp offers a wider surface.

Choose this VENDAV for occasional pickup or trailer loading of a motorcycle, dirt bike, or other narrow equipment within its 750-pound rating. Its defined wheel path suits single-track tires, not broad four-wheel loading.

Listed on Amazon as: Motorcycle Ramp for Pickup Trucks, 7.5 ft Folding Aluminum Dirt Bike Ramp

#3 · Traction Surface

3. VENDAV Punch Plate Ramp

• Dimensions: 89"L x 12"W x 2"H
• Weight: 18.2 lb
• Load Capacity: 750 lb
• Material: Aluminum

Best for: Traction-focused dirt-bike loading.

Why it ranks #3: The 89-by-12-inch motorcycle ramp has a 750-pound rating and a raised punched surface intended to help provide tire grip.

A punched plate surface gives this VENDAV ramp raised openings to help provide tire grip while loading a motorcycle or dirt bike. The folding, single-ramp aluminum format measures 89 by 12 inches and supports up to 750 pounds when the load is properly distributed and the ramp is correctly positioned and secured.

Its 89-inch length and 12-inch width provide a defined path for two-wheel equipment moving into a compatible pickup or trailer. Raised punched openings are intended to help with tire grip, while welded aluminum construction and compression testing in quality control support confidence in the ramp's strength. At 18.2 pounds, it remains a carryable single ramp, though buyers should account for its specified 750-pound limit and secure positioning before loading.

Skip it if you need capacity above 750 pounds on one ramp; FACHNUO TOOL's 10-foot ramp is rated for 1,500 pounds per ramp.

This VENDAV suits riders loading a dirt bike or motorcycle into a compatible pickup or trailer who value a punched traction surface. Keep equipment within its 750-pound rating and position and secure the ramp correctly.

Listed on Amazon as: Dirt Bike & Motorcycle Ramp for Pickup Trucks, 1 Pack

#4

4. MAXIVAMN Aluminum Ramp

• Dimensions: 89"L x 12"W x 2"H
• Weight: 7.2 kg
• Load Capacity: 750 lb
• Material: Aluminum

Best for: Basic single-track pickup loading.

Why it ranks #4: Its 89-inch length, 12-inch width, and 750-pound capacity are specified for motorcycles and dirt bikes loaded into pickups or trailers.

An 89-inch aluminum ramp gives the MAXIVAMN a long, defined path for loading a compatible motorcycle or dirt bike into a pickup or trailer. Its 12-inch width and 750-pound rating suit single-track equipment, while the folding design offers a way to reduce its length for storage.

The 89-by-12-inch loading surface creates a specified wheel path, and the product advises keeping the tire centered and checking tire width for compatibility. Its aluminum construction provides a single-ramp setup rated for equipment up to 750 pounds. The ramp folds, which can make storage more manageable than leaving an 89-inch ramp extended; however, the supplied specifications do not state its folded dimensions. Buyers should weigh the equipment and verify the loading setup before use.

Skip it if you need a stated compact folded size before buying; LEMNISCATE's tri-fold ramp lists dimensions of 30.7 by 11 by 7.5 inches folded.

This MAXIVAMN fits buyers loading a motorcycle or dirt bike on a compatible pickup or trailer within 750 pounds. Its long folding profile is useful to consider, but the listed details do not specify its folded footprint.

Listed on Amazon as: Motorcycle Ramp for Pickup Trucks, Aluminum Dirt Bike Ramp, 1 Pack

#5 · Compact Fold

5. LEMNISCATE Tri-Fold Ramp

• Dimensions: 89"L x 11"W x 2"H
• Weight: 18.5 lb
• Load Capacity: 600 lb
• Material: Aluminum

Best for: All-weather tri-fold loading.

Why it ranks #5: This 89-inch motorcycle ramp has a 600-pound capacity and folds to 30.7 by 11 by 7.5 inches for compact storage.

A riveted perforated surface gives the LEMNISCATE ramp traction features intended to help prevent wheel slippage, including in rain. Its 89-inch length supports pickup loading, while the tri-fold design collapses to 30.7 by 11 by 7.5 inches for more compact storage than its deployed footprint.

The 600-pound-per-ramp capacity and 11-inch width define the loading boundary, while the perforated, riveted surface is specified to resist slippage and edge warping from uneven stress. Its weatherproof design resists rust, and the product states that the ramp remains stable in rain. Tri-folding reduces the 89-inch ramp to a 30.7-by-11-by-7.5-inch package, a practical advantage for storage, though the 18.5-pound weight still matters when carrying it.

Skip it if you want the lightest compact single-track option; Gorkett's 6-foot ramp weighs about 8 pounds and folds to 37.8 inches.

Select this LEMNISCATE for a pickup-loading setup that benefits from a tri-fold footprint and a surface specified for wet conditions. Keep the load within 600 pounds and account for its 18.5-pound carry weight.

Listed on Amazon as: Aluminum Motorcycle Ramps & Loading Ramps for Pickup Trucks – Tri-Fold Lightweight Design for Dirt Bikes, Lawn Mowers, ATVs, 600 lb Capacity, 89"11", 1PC, Silver

#6 · Wide Platform

6. GarveeTech Tri-Fold Ramp

• Dimensions: 76.38"L x 49.61"W x 1.97"H
• Weight: 38.7 lb
• Load Capacity: 1500 lb
• Material: Aluminum

Best for: Wide-platform ATV loading.

Why it ranks #6: Its 76-inch-long, nearly 50-inch-wide platform and 1,500-pound total capacity offer a broad loading surface for varied equipment.

A 50-inch-wide ramp surface creates room for broad equipment that a narrow motorcycle ramp cannot accommodate. GarveeTech's 76-inch tri-fold aluminum ramp carries a 1,500-pound total capacity and folds to one-third of its size, combining a wide loading platform with more compact storage.

The 50-by-76-inch surface supports loading motorcycles as well as ATVs, UTVs, lawnmowers, tractors, and snow blowers, according to the product description. Its 1,500-pound total capacity provides the stated load limit, while the tri-fold design reduces the ramp to one-third of its deployed size for transport or storage. At 38.7 pounds, it is substantially heavier than compact single-track ramps, so buyers should consider handling as well as the space required when unfolded.

Skip it if you want a lighter, narrow ramp for a motorcycle only; Gorkett's 6-foot ramp weighs about 8 pounds.

Pick this GarveeTech when a wide surface and 1,500-pound total capacity suit your pickup loading needs for motorcycles or broader equipment. Its 38.7-pound weight and 50-inch width call for adequate handling and storage space.

Listed on Amazon as: Aluminum Tri-Fold Ramp with Treads, Ramps for Pickup Trucks 76"x50"

#7

7. TaiH Leo 10FT Ramp

• Dimensions: 61.5"L x 17.7"W x 5.5"H
• Weight: 44 lb
• Load Capacity: 1500 lb
• Material: Aluminum

Best for: Multi-equipment ramp users.

Why it ranks #7: The 120-inch ramp has a 17.7-inch width and a listed 1,500-pound capacity, but weighs 44 pounds and says two pieces are recommended.

A 17.7-inch width and 120-inch deployed length give the TaiH Leo ramp a broad, long loading surface for more than motorcycles alone. The aluminum ramp is listed for ATVs, UTVs, lawnmowers, golf carts, tractors, and snowmobiles, with a stated capacity of 1,500 pounds.

When unfolded, the ramp measures 120 by 17.7 inches; folded, it measures 61.5 by 17.7 inches, giving buyers specific dimensions to consider for storage and transport. The listed 1,500-pound capacity and aluminum construction support its use across a range of equipment, while the product recommends two pieces. At 44 pounds, each ramp is relatively substantial to handle, so carrying and positioning it are important parts of the loading workflow.

Skip it if you prioritize low carry weight for a narrow motorcycle ramp; Gorkett's 6-foot aluminum ramp weighs about 8 pounds.

This TaiH Leo ramp suits buyers loading varied equipment who can use its broad 120-inch surface and accommodate a 44-pound ramp. The product recommends two pieces, so consider the number of ramps needed for your setup.

Listed on Amazon as: 10FT Motorcycle Ramp for Pickup Trucks, 1PC Aluminum Ramps for ATV/Dirtbike

#8

8. Ruedamann 71-inch Ramp

• Dimensions: 70.9"L x 9.8"W x 1.6"H
• Weight: 13 lb
• Load Capacity: 600 lb
• Material: Aluminum

Best for: Compact ramp for narrow tires.

Why it ranks #8: This aluminum ramp weighs 13 pounds and supports 600 pounds, with a stated tire-width limit of 7.5 inches and ground clearance over 2 inches.

A folded length of 36 inches makes this Ruedamann aluminum ramp easier to store than its deployed 70.9-inch length suggests. Its 600-pound capacity and 9.8-inch width target compatible narrow tires, with the product specifying tire widths up to 7.5 inches and ground clearance over 2 inches.

The textured, non-slip surface and anti-skid pads are intended to add grip while minimizing scratches and noise during loading. Side warning bars provide another visible safety feature, while the fold reduces the 70.9-inch ramp to 36 inches for storage. The listed 600-pound capacity is per ramp, and the product specifies tire widths up to 7.5 inches plus ground clearance over 2 inches, making those fit limits central to choosing it.

Skip it if you have tires wider than 7.5 inches; MAXIVAMN's 12-inch-wide ramp does not list that same tire-width limit.

This Ruedamann fits buyers who need a foldable aluminum ramp for equipment within 600 pounds and the specified tire and clearance limits. Its textured surface and compact folded length suit storage-conscious pickup loading.

Listed on Amazon as: Ruedamann 71" Aluminum Loading Ramps for Pickup Trucks, 600Lbs Capacity

#9

9. Ruedamann 83-inch Ramp

• Dimensions: 83"L x 8.7"W x 2"H
• Weight: 18.3 lb
• Load Capacity: 480 lb
• Material: Alloy Steel

Best for: Strapped steel ramp for low loads.

Why it ranks #9: Its 83-inch galvanized steel ramp includes straps and is listed at 480 pounds per ramp, below most motorcycle-specific aluminum options here.

Galvanized steel construction gives the Ruedamann a stable base for loading equipment at heights under 30 inches. This 83-inch folding ramp includes safety straps to help prevent shifting, plus gloves to protect hands during handling; its stated single-ramp capacity is 480 pounds.

The 83-by-8.7-inch surface provides a narrower path for compatible equipment, and the product specifies use under 30 inches in height. Safety straps help keep the ramp from shifting during use, while included gloves address hand protection during handling. Its alloy-steel construction and 18.3-pound weight make material and carrying considerations relevant alongside the 480-pound limit. The product describes 960 pounds when two ramps are used, but each individual ramp is rated at 480 pounds.

Skip it if you need more than 480 pounds of capacity from one ramp; FACHNUO TOOL's ramp is rated for 1,500 pounds per ramp.

Choose this Ruedamann for a compatible load below 480 pounds and a loading height under 30 inches, especially if straps and gloves matter. Its 8.7-inch width and steel construction are key handling considerations.

Listed on Amazon as: Ruedamann 83" Folding Motorcycle Ramp, 500 lbs Capacity, 1PC

#10

10. Gorkett 6FT Ramp

• Dimensions: 72.4"L x 6.4"W x 2"H
• Weight: 8 lb
• Load Capacity: lb 440
• Material: Aluminum

Best for: Lightweight compact motorcycle ramp.

Why it ranks #10: At 72.4 inches long and 6.4 inches wide, this compact single-track ramp supports 440 pounds, the lowest listed capacity in this selection.

Weighing about 8 pounds, the Gorkett ramp is notably easy to carry for riders who need a portable single-track loading option. It extends to 72.4 inches and folds to 37.8 inches, with a 440-pound capacity and a 6.4-inch width for compatible bikes.

The folding dimensions make storage more compact: the ramp contracts from 72.4 inches long to 37.8 inches while retaining its 6.4-inch width. At 8 pounds, it is easy to transport between a truck bed and garage, but the narrow surface is specified for single-track vehicles and the capacity is limited to 440 pounds. Check the vehicle's tire width against the product's limit before loading, and keep the load within its stated rating.

Skip it if you need capacity above 440 pounds; Ruedamann's 71-inch aluminum ramp is rated for 600 pounds per ramp.

The Gorkett suits riders with a compatible, lighter single-track bike who value easy carrying and compact folded storage. Its 440-pound limit and 6.4-inch width make load weight and tire fit essential boundaries.

Listed on Amazon as: 6FT Folding Motorcycle Loading Ramp, 440 lb Aluminum Ramp for Bikes