Best Steel Ramps For Trucks: Compare Loading and Service Ramps

#1 · Best Overall

1. LIEKUMM 40-Inch Truck Ramps

• Dimensions: 40"L x 9"W x 1.6"H
• Weight: 15 lb
• Load Capacity: 2200 lb
• Material: Metal

Best for: Short ramps for low loading heights.

Why it ranks #1: The 40-inch solid-steel pair is specified for low 11- to 18-inch loading heights and supports 2,200 pounds, a focused truck-bed fit.

LIEKUMM’s 40-inch steel ramps target loading heights from 11 to 18 inches, making them a compact option for pickup beds, trailers, and truck beds. Their pair is rated for 2,200 pounds, and perforated decking provides the listed anti-slip surface.

The short 40-by-9-inch format suits the specified 11-to-18-inch loading-height range, so buyers can match ramp length to a low loading point without handling a 72-inch pair. Solid-steel construction supports the stated 2,200-pound capacity per pair, while perforated decking is intended to improve tire traction. The ramps are listed for ATVs, lawn mowers, and utility vehicles; their compact length also reduces storage demands compared with longer loading ramps.

Skip it if you load at a higher point and need a longer approach; Garvee’s 72-inch ramps provide a longer track.

LIEKUMM suits buyers loading equipment into low truck beds or trailers within the specified 11-to-18-inch height range. Its 40-inch length is a useful fit consideration when the loading point is higher.

Listed on Amazon as: LIEKUMM 40" Truck Ramps, 2200 lbs Loading Ramps for Pickup Trucks

#2 · Best Folding Pair

2. Stalwart 77-Inch Ramps

• Dimensions: 77"L x 8.86"W x 1.57"H
• Load Capacity: 2200 lb
• Material: Alloy Steel

Best for: Foldable higher-capacity pair.

Why it ranks #2: These 77-inch alloy-steel ramps fold and carry a 2,200-pound combined rating, suiting buyers needing longer reach and compact storage.

Stalwart’s two 77-inch ramps fold for storage and provide a stated combined capacity of 2,200 pounds, giving equipment owners a portable pair for trucks, trailers, or sheds. Each ramp is rated for 1,100 pounds, and the recommended usage height is 38 inches.

The 77-inch length and 38-inch recommended usage height give buyers a clear guide for matching the ramps to a loading location. Foldable construction makes the pair easier to put away after moving an ATV, motorcycle, golf cart, or mower. Each ramp carries a stated 1,100 pounds, while the set supports up to 2,200 pounds combined; the pair can also be used separately for motorcycles and dirt bikes. These ratings define the load and setup boundaries.

Skip it if you load from a lower 11-to-18-inch height and prefer shorter ramps; LIEKUMM lists a 40-inch pair for that range.

Stalwart fits buyers who need foldable ramps for ATVs, motorcycles, golf carts, or mowers and can work within the 38-inch recommended height. Check both the per-ramp and combined capacity before loading.

Listed on Amazon as: Loading Ramps – Set of Two 77-Inch Folding Ramps for ATVs, Motorcycles, Mowers, Carts, and More – 2200lb Combined Capacity Car Ramp Set by Stalwart

#3 · Highest Per-Ramp Capacity

3. Garvee 72-Inch Loading Ramps

• Dimensions: 10.43"L x 2.76"W x 73.23"H
• Weight: 39.3 lb
• Load Capacity: 1000 Lbs

Best for: Non-folding long steel pair.

Why it ranks #3: The 72-by-9-inch non-folding steel pair is described as supporting 1,000 pounds per ramp, making its stated individual-ramp rating notable.

Garvee’s 72-inch non-folding steel ramps give equipment a long loading path, while the 9-inch width helps align standard tires. The pair is listed at 1,000 pounds capacity and suits motorcycles, dirt bikes, ATVs, e-bikes, and UTVs.

The 72-by-9-inch format is intended to fit a variety of truck-bed heights and help minimize chassis scraping, giving buyers a longer approach for loading equipment. The 9-inch width supports precise alignment for standard tires, and punched holes are specified to enhance traction between ramp and tire. Steel construction and a 1,000-pound capacity per ramp provide the stated support for listed vehicles, but the non-folding design means storage must accommodate the full ramp length.

Skip it if you need ramps that fold down for storage; Stalwart’s 77-inch pair is foldable.

Garvee suits buyers who can store long, non-folding ramps and want a 72-inch approach for loading listed equipment. Check the per-ramp rating and available truck-bed height before using the pair.

Listed on Amazon as: Garvee 72"x9" Heavy Duty Steel Loading Ramps (2 Pack) – 1000 Lbs Capacity, Non-Folding Truck & Trailer Ramps for Motorcycles, Dirt Bikes, ATVs, E-Bikes, UTVs – Portable Design

#4 · Stainless Steel Pair

4. Evcitn 75-Inch Truck Ramps

• Dimensions: 78.7"L x 47.2"W x 7.5"H
• Weight: 36.4 lb
• Load Capacity: 1500 lb
• Material: Iron, Metal, Plastic, Stainless Steel

Best for: Long equipment-loading approach.

Why it ranks #4: This 75-inch pair is listed at 1,500 pounds combined and has a textured, perforated surface; the listing describes stainless-steel construction.

At 75 inches long, Evcitn’s paired ramps provide an extended loading path for motorcycles, lawn mowers, dirt bikes, and similar equipment. Their textured, perforated tread adds tire contact along that path, while the stated 1,500-pound capacity applies to the pair.

The 75-inch ramp length supports a gradual loading approach to a pickup, and the anti-slip textured, perforated surfaces are intended to improve grip while equipment moves over them. Stainless-steel construction and professional welding are listed alongside a 1,500-pound pair capacity, so buyers should assess the load as a combined setup rather than assume that rating applies to each ramp. The set is aimed at loading equipment, not raising a vehicle for service.

Skip it if you need ramps that fold for compact storage; the Generic alloy-steel ramp folds to 37.6 inches.

Choose Evcitn for loading equipment into a pickup when a long approach and treaded surface matter. Its listed capacity is 1,500 pounds per pair, so keep the combined load within that limit.

Listed on Amazon as: Truck Ramps 75" 1500 LBS 2 Pack, Extra Heavy Duty Loading Ramps for Lawn Mower, Portabe Non Slip Motorcycle Ramps for Pickup Trucks, ATV, Dirt Bikes, UTV

#5 · Best Safety Extras

5. Arejonner Folding Ramps

• Dimensions: 72.5"L x 8.7"W x 1.8"H
• Weight: 34.1 lb
• Load Capacity: 1500 lb
• Material: Alloy Steel

Best for: Strapped, traction-focused loading.

Why it ranks #5: The 72.5-inch alloy-steel pair has a 1,500-pound capacity, dense perforated traction, four safety straps, and protective gloves.

Arejonner pairs dense perforated steel ramps with four safety straps, addressing both tire traction and securing the ramps during loading. The 72.5-inch pair is rated for 1,500 pounds and is listed for motorcycles, ATVs, UTVs, lawn mowers, and other equipment.

The dense perforated surface is intended to improve traction and reduce wheel slippage, while the four included straps secure the ramps in place during use. Those features support a more controlled loading setup for equipment moving into a shed, barn, garage, or trailer. The pair’s listed capacity is 1,500 pounds, and the 72.5-by-8.7-inch dimensions set the available track size. Protective gloves are also included for installation, adding a practical handling aid when positioning the ramps.

Skip it if you need a wider individual ramp surface; VEVOR specifies a 9.84-inch-wide ramp with carrying handles.

Arejonner fits buyers who prioritize traction and ramp-securing straps when loading listed equipment into a trailer or building. The 1,500-pound pair rating and 8.7-inch width are important limits to check against the job.

Listed on Amazon as: 72.5" Heavy Duty Folding Loading Ramps, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves

#6

6. VEVOR Steel Ramps

• Dimensions: 75.98"L x 9.84"W x 2.36"H
• Weight: 37 lb
• Load Capacity: 1000 lb
• Material: Alloy Steel

Best for: Wider-surface steel loading pair.

Why it ranks #6: This 75.98-inch alloy-steel pair supports 1,000 pounds combined and offers a wider 9.84-inch surface with handles.

VEVOR’s two steel ramps have a widened 9.84-inch surface and handles, combining a broader loading track with a way to carry the ramps. Their 1,000-pound combined rating covers listed equipment such as ATVs, UTVs, motorcycles, push mowers, and electric scooters.

The 9.84-inch width gives tires a wider track than a narrow ramp, while the handles support carrying the two-piece set between storage and loading locations. VEVOR specifies all-steel construction, precision-welded sealed joints, and a white zinc-coated surface for corrosion resistance. Those details suit repeated equipment loading and help with handling and surface protection, but the 1,000-pound capacity applies to the combined set. At nearly 76 inches long, the ramps also need room for storage.

Skip it if you need a higher pair capacity; the Stalwart set is rated for 2,200 pounds combined.

VEVOR suits buyers loading listed recreational or yard equipment who value a wider surface and carrying handles. Its combined 1,000-pound limit and nearly 76-inch length should match both the load and available storage space.

Listed on Amazon as: VEVOR Steel Ramps, 1000 lbs, 2Pcs Heavy-Duty Ramps with Wider Ramp Surface, Universal Stable Loading Ramp with Handles, Fit for ATV, UTV, Motorcycle, Electric Bicycle, etc.

#7

7. PioneerWorks 72-Inch Ramps

• Dimensions: 76.38"L x 9.06"W x 1.97"H
• Weight: 39.3 lb
• Load Capacity: 1000 lb

Best for: Paired ramps for light equipment.

Why it ranks #7: The 72-inch steel pair is rated for 1,000 pounds total and has a punched traction surface that allows water drainage.

PioneerWorks supplies two 72-inch steel ramps with punched, textured surfaces that help tires grip during equipment loading. The pair is rated for 1,000 pounds total, making the stated combined limit central for buyers moving motorcycles, mowers, or similar equipment into a truck or trailer.

Each ramp is rated for 500 pounds, while using both gives the listed 1,000-pound total capacity; that distinction helps buyers plan balanced loading without exceeding one ramp’s rating. The punched, textured surface is specified to improve tire grip and drain water, which can make cleanup straightforward after outdoor use. Rust-resistant steel construction and 72-by-9-inch dimensions suit loading into truck beds, trailers, sheds, or garages, but this is a loading ramp set rather than a vehicle-service lift.

Skip it if you need a higher combined load rating; the Stalwart pair is listed for 2,200 pounds combined.

PioneerWorks suits buyers loading lighter equipment into a truck, trailer, shed, or garage who want a pair with water-draining traction. Keep each ramp under 500 pounds and the pair under 1,000.

Listed on Amazon as: PioneerWorks 2-Pack 72" Steel Ramps – 500 lb Each / 1,000 lb Pair,Silver

#8

8. Generic Folding Motorcycle Ramp

• Dimensions: 78"L x 9"W x 1.97"H
• Load Capacity: 750 lb
• Material: Alloy Steel

Best for: Fold-away single-ramp loading.

Why it ranks #8: Its folding alloy-steel design measures 78 inches and includes load straps, but the single ramp is rated for only 750 pounds.

This alloy-steel ramp folds from 73.11 inches to 37.6 inches, making it easier to store in a garage or trailer between loading jobs. Its 750-pound capacity and single-ramp format suit buyers moving one motorcycle or other listed equipment at a time.

The folding design reduces the ramp’s length for storage, while the expanded dimensions of 73.11 by 9.05 inches provide a narrow loading surface when deployed. Alloy steel supplies the listed construction, and the 750-pound capacity sets a clear load boundary for motorcycles, ATVs, UTVs, lawn mowers, and dirt bikes. Because this is a single ramp, buyers should consider whether their loading workflow calls for one track or a paired setup.

Skip it if you want a two-ramp set for balanced loading; PioneerWorks supplies a pair with 1,000 pounds combined capacity.

This ramp fits buyers who value fold-away storage and need one loading track for listed equipment. Its 750-pound capacity is the key boundary, and the single-ramp format may not suit every vehicle-loading setup.

Listed on Amazon as: Alloy Steel Motorcycle Ramp, 750 Lbs Capacity, 78in Folding Loading Ramp with Load Straps for Pickup Trucks, Motorcycles, ATVs, UTVs, Lawn Mowers, Dirt Bikes (1)

#9

9. Garvee Solid Steel Car Ramps

• Dimensions: 37"L x 13"W x 11"H
• Weight: 32.7 lb
• Load Capacity: 8000 lb
• Material: Alloy Steel

Best for: Higher-clearance garage maintenance.

Why it ranks #9: These solid-steel service ramps provide an 8-inch lift and 8,000-pound total capacity, but serve maintenance rather than truck-bed loading.

An 8-inch lift gives these Garvee solid-steel ramps room for under-vehicle work, while their 8,000-pound total capacity covers cars, trucks, and SUVs. The combination suits owners who want a fixed ramp setup for routine service rather than a loading ramp for equipment.

The stated 8-inch lift creates working clearance for oil changes, tire rotations, inspections, and general repairs, so the ramps serve several common garage tasks. Their 8,000-pound total rating is specified as 2,000 pounds per ramp, making the per-ramp limit important when positioning a vehicle. At 37 inches long and 13 inches wide, they occupy a substantial footprint; the solid-steel construction favors a stationary service setup over compact storage.

Skip it if you need foldable loading ramps for equipment; the Stalwart 77-inch set folds for transport and loading.

Garvee suits owners servicing cars, trucks, or SUVs who want 8 inches of lift for routine maintenance. Check the per-ramp rating against the vehicle and remember its 37-by-13-inch footprint when planning garage storage.

Listed on Amazon as: Garvee 8 Inch Lift Solid Steel Car Ramps, 8000 LBS, Heavy Duty Auto Truck Ramps for Oil Change and Car Repair Vehicle Service Ramps for Car Truck SUV Repair Maintenance, 2 Pack

#10

10. COZONY Solid Steel Car Ramps

• Dimensions: 35.43"L x 11.81"W x 9.06"H
• Weight: 32.7 lb
• Load Capacity: 4000 lb

Best for: Manganese-steel service ramps.

Why it ranks #10: The manganese-steel service ramps offer an 8-inch lift and 4,000-pound capacity, but their maintenance-focused design is less suited to loading equipment.

COZONY’s manganese-steel ramps provide an 8-inch lift, creating under-vehicle clearance for garage or driveway maintenance. Their listed 4,000-pound capacity and black coating for rust, corrosion, and scraping resistance make them a service-focused option for owners working on vehicles at home.

The 8-inch lift creates a stated workspace beneath the vehicle for maintenance tasks, while the 4,000-pound capacity sets the load boundary for selecting a vehicle. Manganese-steel construction supplies the ramp structure, and the durable black coating is described as resisting rust, corrosion, and scraping during indoor or outdoor tasks. At 35.43 inches long and 11.81 inches wide, the ramps have a compact service footprint; buyers should account for those dimensions when positioning them.

Skip it if you need an 8,000-pound total capacity for vehicle service; Garvee’s solid-steel ramps list that rating.

COZONY suits home mechanics seeking 8 inches of lift for garage or driveway maintenance, with a coated manganese-steel structure. Keep the vehicle within its 4,000-pound capacity and check the 35.43-inch ramp length.

Listed on Amazon as: Heavy Duty Car Ramps Solid Steel Auto Vehicle Repair Maintenance Lift Pack