Best Tires For Log Splitter: Compare Wheels, Tires, and Fit

#1 · Best Overall

1. Tkaimy 4.8×8 Wheel-and-Tire Combo

• Weight: 3 oz
• Size: 4.80×8
• Wheel Size: 8 in
• Rim Size: 8 in

Best for: Single-wheel spindle replacement.

Why it ranks #1: Designed for common log splitter use, it has tapered roller bearings for 1-inch spindles and a stated 390-pound capacity per wheel.

Tapered roller bearings for 1-inch spindles give this Tkaimy wheel-and-tire combo a specific axle match for log splitters and other utility equipment. Its 4.8×8-inch size and stated 390-pound per-wheel load capacity make it a practical option when replacing one wheel and the bearing spacing suits the axle.

The tapered roller bearings are specified for 1-inch spindles, with 4-1/8 inches between bearings; matching both dimensions helps determine whether the assembly fits the existing axle. The 4.8×8-inch tire and wheel arrive as a combo, so there is no separate tire-to-rim assembly step described. A hub cap and all bearings are included. The stated 390-pound load capacity is per wheel, which gives buyers a concrete limit to check against their equipment’s requirements.

Skip it if you need a two-wheel set; RecStuff ABIN8100x2 supplies a pair of 4.80×8 wheels.

For a buyer replacing one wheel on a log splitter, generator, wagon, or cart, this combo offers a defined spindle and bearing match. Check the 1-inch axle, bearing spacing, and per-wheel load limit before choosing it.

Listed on Amazon as: 1" Bearing Log Splitter Wheel with Tire 4.8" wide X 8" diameter.

#2 · Best Two-Pack

2. RecStuff White 4.80×8 Assembly

• Weight: 22 lb

Best for: Two-wheel greased assembly set.

Why it ranks #2: This two-pack arrives fully assembled with 1-inch bearings, dust caps, grease seals, Zerk fittings, and grease for 1-inch-by-4-1/8-inch shafts.

A fully assembled pair with grease, a zerk fitting, dust caps, and grease seals lets buyers replace two wheels without sourcing those listed components separately. RecStuff specifies 4.80×8 Load Range B tires on white integral wheels, with fit for 1-inch-diameter shafts measuring 4-1/8 inches long.

The two-wheel pack is supplied fully assembled, and the included grease, zerk fitting, grease seals, and dust caps cover several components involved in wheel installation and upkeep. Its stated shaft fit—1 inch in diameter by 4-1/8 inches long—gives buyers specific measurements to compare with their axle. The 4.80×8 Load Range B tire and integral wheel make this a matched tire-and-wheel replacement rather than a tire-only purchase.

Skip it if you need only one wheel; RecStuff ABIN8101 is listed as a single 4.80×8 assembly.

This pair suits buyers replacing both wheels who want assembled 4.80×8 units and included greasing components. Its fit is specifically stated for 1-inch shafts with 4-1/8-inch length, so those axle dimensions are a key boundary.

Listed on Amazon as: Log Splitter Wheel 4.80X8 Load Range B Tire on White Integral Wheel with 1 Inch Bearings – 2 Pack

#3 · Best OEM Fit

3. Swisher 7296K Replacement Wheel

• Weight: 12 lb
• Size: 15.5
• Wheel Size: 8.25 in
• Rim Size: 8 in

Best for: Select Swisher model replacement.

Why it ranks #3: This genuine Swisher replacement is specified for select Swisher log splitter models and has a sawtooth tread design.

Genuine Swisher replacement status and a sawtooth tread make this 15.5-inch tire-and-wheel assembly a focused repair part for select Swisher log splitters. Its listed compatibility names multiple models, including LS22E and LS12534HP, helping owners narrow whether this replacement belongs on their machine.

The tire and wheel are supplied together as a genuine Swisher replacement, which keeps the repair centered on the listed component rather than a separate tire purchase. Sawtooth tread is the stated tread pattern, while the 15.5-inch size identifies the replacement assembly’s listed size. Compatibility is limited to select Swisher log splitters; the supplied model list includes LS22E, LSED14534, LSRH4422, and LS12534HP among others, making model identification central to the buying decision.

Skip it if you own a splitter outside the listed Swisher models; Ogracwheel 4.80/4.00-8 is a universal-style utility replacement option.

For owners of a listed Swisher splitter with a damaged wheel, this genuine assembly offers a model-specific replacement with sawtooth tread. Check the machine against the supplied compatibility list; it is not presented as a universal wheel.

Listed on Amazon as: 7296K – Swisher Replacement 15.5" Tire/Wheel for Select Swisher Log Splitters

#4 · Best Flat-Free

4. Ogracwheel Flat-Free Tire and Wheel

• Size: 4.80/4.00-8
• Wheel Size: 16 in

Best for: Puncture-proof solid-wheel option.

Why it ranks #4: Its solid-rubber construction is described as puncture-proof, and the assembly lists a 1-inch bearing and 3-inch hub length.

Solid rubber construction removes the need to manage a pneumatic tire’s air pressure and is listed as puncture-proof, leak-proof, and UV-resistant. Ogracwheel combines that tire with a 1-inch ball bearing and adjustable spacer, offering a replacement format for utility carts, wheelbarrows, and similar equipment.

The 4.80/4.00-8 tire-and-wheel assembly uses solid foam material, so punctures and air leakage are not the maintenance concerns identified for pneumatic tires. Its 1-inch ball bearing and adjustable spacer support installation across compatible utility equipment, while the listed 3-inch hub length gives another dimension to compare with the axle setup. The product is explicitly not intended for highway use, making it a utility-equipment choice rather than a road-going tire.

Skip it if you need a pneumatic tire or highway use; this Ogracwheel assembly is solid and explicitly not for highway use.

This is a fit for buyers prioritizing a solid, low-air-maintenance wheel on a log splitter or utility cart. Check the 1-inch bearing and 3-inch hub length against the axle, and keep it off highway applications.

Listed on Amazon as: Flat Free Log Splitter Tires 4.80×8 1" Bearing Axle Hole for Wheel Barrow Garden Utility Cart, Universal Replacement

#5

5. RecStuff Black LRC Assembly

• Weight: 22 lb
• Size: 4.80×8
• Wheel Size: 8 in
• Rim Size: 8 in

Best for: Black Load Range C pair.

Why it ranks #5: This two-piece 4.80×8 assembly specifies 1-inch bearings and a 4-1/8-inch shaft length, useful when those dimensions match the splitter.

Load Range C tires on black integral wheels give this RecStuff pair a defined tire classification in a complete two-wheel format. The 4.80×8 size, 1-inch bearings in the title, and 4-1/8-inch shaft length provide concrete fit details for buyers comparing replacement assemblies with their splitter axle.

The package contains two LRC 4.80×8 tires on integral wheels, so it replaces a pair of tire-and-wheel units rather than tires alone. The listed 4-1/8-inch shaft length helps buyers compare the assembly against their axle, while the title specifies 1-inch bearings. Alloy-steel material is listed for the wheel assembly. Taken together, these dimensions and the Load Range C designation provide a more specific selection basis than size alone.

Skip it if you want silver wheels; RecStuff ABIN8101x2 is a silver 4.80×8 two-wheel assembly.

This black pair fits buyers replacing two 4.80×8 wheels who need the listed 4-1/8-inch shaft length and Load Range C tires. Check the axle dimensions and bearing diameter before selecting the assembly.

Listed on Amazon as: Log Splitter Wheel 4.80X8 Tire LRC on Black Integral Wheel with 1 Inch Bearings – 2 Pack

#6

6. RecStuff White LRC Assembly

• Weight: 22 lb
• Size: 4.80×8
• Wheel Size: 8 in
• Rim Size: 8 in

Best for: White Load Range C pair.

Why it ranks #6: The two-piece 4.80×8 assembly lists 1-inch bearings and a 4-1/8-inch shaft length, with a white integral wheel.

White integral wheels paired with two LRC 4.80×8 tires distinguish this RecStuff set for buyers replacing both sides with a matched assembly. Its listing gives a 4-1/8-inch shaft length and identifies 1-inch bearings in the title, making those dimensions central to axle compatibility.

The two included tires are mounted on integral wheels, so the buyer gets a pair of complete replacement assemblies rather than loose tires. Load Range C identifies the tire classification, and the 4.80×8 size helps compare the set with the existing equipment. The 4-1/8-inch shaft length and 1-inch bearings provide specific axle details to check during selection. Alloy steel is the listed wheel material, and the white wheel finish differentiates this version.

Skip it if you prefer black wheels; RecStuff AD08C480IB-KRW offers the listed LRC pair on black integral wheels.

Choose this white pair when both 4.80×8 wheel assemblies need replacement and the stated axle dimensions match. The listing specifies a 4-1/8-inch shaft and 1-inch bearings, so fit remains the key boundary.

Listed on Amazon as: Log Splitter Wheel 4.80X8 Tire LRC on White Integral Wheel with 1 Inch Bearings – 2 Pack

#7

7. RecStuff Black 4.80×8 Assembly

• Weight: 22 lb
• Size: 4.80X8
• Wheel Size: 4.8 in

Best for: Black two-wheel assembly set.

Why it ranks #7: This fully assembled two-pack includes dust caps, grease seals, Zerk fittings, and grease, and specifies fit for 1-inch-diameter, 4-1/8-inch shafts.

Two black 4.80×8 tire-and-wheel assemblies arrive fully assembled with 1-inch bearings, dust caps, grease seals, zerk fittings, and grease. That package gives log-splitter owners a paired replacement with several installation and upkeep components already included, subject to the listed shaft dimensions.

The two-pack format provides a matching pair rather than a single replacement, while the 1-inch bearings establish the axle diameter this assembly is intended to fit. Dust caps and grease seals are included, and the zerk fittings plus supplied grease support bearing lubrication. Since the assemblies are fully assembled, buyers avoid sourcing a tire and wheel separately. Confirm the shaft setup against the stated 1-inch bearing specification before planning installation.

Skip it if you need a stated 4-1/8-inch shaft-length match; RecStuff ABIN8100x2 lists that shaft dimension explicitly.

This set suits buyers replacing a pair of wheels who want greasing hardware included and prefer black integral wheels. Its title identifies 1-inch bearings, but buyers needing a stated shaft-length specification should consider that fit boundary.

Listed on Amazon as: Log Splitter Wheel 4.80X8 Tire on Black Integral Wheel with 1 Inch Bearings – 2 Pack

#8

8. RecStuff Silver 4.80×8 Assembly

• Weight: 22 lb
• Size: 4.80×8
• Wheel Size: 4.8 in
• Rim Size: 8 in

Best for: Silver two-wheel replacement pair.

Why it ranks #8: The two-pack is a 4.80×8 integral-wheel assembly and includes dust caps, grease seals, Zerk fittings, and grease.

A fully assembled pair of silver integral wheels with 1-inch bearings makes this RecStuff set a direct-format replacement for buyers needing two 4.80×8 log-splitter wheels. Dust caps, grease seals, zerk fittings, and grease are included, bringing both assemblies and listed maintenance components into one package.

The two-pack supplies matching 4.80×8 tire-and-wheel units, which is useful when both wheels need replacement at once. One-inch bearings define the stated axle diameter, while the included dust caps and grease seals cover protective components and the zerk fittings with grease support lubrication. Fully assembled construction avoids separate tire-and-wheel assembly. The silver integral-wheel configuration is the product-specific choice; the supplied listing does not state a shaft length for this model.

Skip it if you require a listed 4-1/8-inch shaft length; RecStuff AD08C480IW-KRW states that dimension for its white pair.

A good match for buyers seeking two assembled silver 4.80×8 wheels with greasing components included. The 1-inch bearing diameter is specified, but the supplied details omit shaft length, so that is an important fit boundary.

Listed on Amazon as: Log Splitter Wheel 4.80X8 Tire on Silver Integral Wheel with 1 Inch Bearings – 2 Pack

#9

9. RecStuff Silver Single Assembly

• Weight: 11 lb

Best for: Single silver wheel assembly.

Why it ranks #9: This single 4.80×8 integral-wheel option includes a dust cap, grease seal, Zerk fitting, and grease, though fit dimensions are not stated.

A single 4.80×8 tire on a silver integral wheel gives this RecStuff listing a straightforward format for replacing one wheel rather than buying a pair. The title specifies 1-inch bearings, and the supplied components include grease, a zerk fitting, dust cap, and grease seal.

This is a single tire-and-wheel assembly, useful when only one side needs replacement and a two-wheel pack is unnecessary. Its 4.80×8 size and 1-inch bearings are the key stated fit details, while the silver integral wheel keeps tire and wheel together as one unit. The assembly is fully assembled and includes grease, a zerk fitting, dust cap, and grease seal, supporting installation and bearing maintenance without separate sourcing of those listed items.

Skip it if you need a pair; RecStuff ABIN8101x2 supplies two silver 4.80×8 assemblies with the listed service components.

This suits a buyer replacing one silver 4.80×8 wheel and wanting grease and bearing-service components included. The supplied details identify 1-inch bearings but do not give a shaft length, so verify that axle dimension independently.

Listed on Amazon as: Log Splitter Wheel 4.80X8 Tire on Silver Integral Wheel with 1 Inch Bearings

#10

10. HALBERD 4.80-8 Tires

• Weight: 5.9 lb
• Size: 4.80-8
• Rim Size: 8 in

Best for: Tubeless tire-pair replacement.

Why it ranks #10: These two tubeless 6-ply, Load Range C tires list a 745-pound load capacity, but the set is tires rather than complete wheel assemblies.

A 6-ply Load Range C construction and tubeless format distinguish this HALBERD two-tire set for buyers replacing tires rather than complete wheel assemblies. The 4.80-8 size fits an 8-inch rim, and the listed load capacity is 745 pounds, useful figures to compare with the equipment and intended load.

Because the set is identified as two tubeless 4.80-8 tires, it addresses tire replacement while leaving wheel selection to the buyer; the specified 8-inch rim size helps narrow that match. Six-ply construction and Load Range C provide the stated tire classification, while the 745-pound load capacity gives a separate listed limit to consider. The product description positions HALBERD tires for lawn and garden, agriculture, and utility uses, alongside trailer applications.

Skip it if you want assembled wheels with bearings; RecStuff ABIN8100x2 includes two integral-wheel assemblies.

Choose this set when you need two tubeless 4.80-8 tires and already have suitable 8-inch rims. It does not include wheels or bearings, so it is a tire-only route rather than a complete log-splitter wheel replacement.

Listed on Amazon as: HALBERD 4.80-8 Trailer Tires 6PR, Load Range C, Set of 2, Tubeless