Best Bracket For Outboard Motor: Compare 10 Options

#1 · Best Overall

1. Marinetech Panther 550407AL

• Material: Aluminum
• Weight: 8.98 kg
• Material Type: Aluminum

Best for: Hand-adjustable 15 HP bracket.

Why it ranks #1: Supports 2- and 4-stroke motors up to 15 HP or 132 pounds, with five running positions, 10 inches of travel, and stainless torsion springs.

Ten inches of hand-adjustable travel and five vertical running positions give the Marinetech Panther 550407AL room to adapt motor height to different boating conditions. It is rated for two- and four-stroke motors up to 15 HP or 132 pounds, and its hard-coat anodized aluminum construction defines its material choice.

The stated 15 HP or 132-pound ceiling gives buyers two limits to compare with their auxiliary motor before installation. A hand-turned knob adjusts the bracket through 10 inches of travel, and five running positions provide selectable motor heights without relying on powered operation. Stainless steel torsion springs counterbalance motor weight during those adjustments, while hard-coat anodized aluminum forms the bracket structure. The listed fishing, water-sports, and cruising uses suit a range of boating routines within those limits.

Skip it if you need support for a motor above 15 HP or 132 pounds; the Marinetech Panther 550021 is listed up to 20 HP or 115 pounds.

This fits boaters whose auxiliary motor falls within 15 HP and 132 pounds and who want multiple manually selected heights. Check both the engine rating and weight, since exceeding either listed limit puts the setup outside its stated range.

Listed on Amazon as: Marinetech Panther 550407AL Aluminum 4-Stroke Motor Bracket – 15 HP

#2 · Longest Travel

2. Marinetech Panther 550416

• Material: Plastic
• Material Type: Plastic

Best for: Long-travel four-stroke adjustment.

Why it ranks #2: Its 16-inch vertical travel and anodized aluminum construction suit changing loads and long- or short-shaft 4-stroke auxiliary motors.

Sixteen inches of vertical travel is the defining feature of the Marinetech Panther 550416, giving owners a wide adjustment span for changing water or load conditions. The anodized aluminum bracket is specified for the increased weight and torque of modern four-stroke motors, including long- and short-shaft setups.

The 16-inch travel gives this bracket a broad vertical adjustment span for setting an auxiliary motor as water or load conditions change. Five running positions are listed in the product description, while a hand-turn knob supports manual adjustment. Stainless steel torsion springs counterbalance motor weight, which helps during repositioning. Its anodized aluminum construction is described as handling the increased weight and torque output of four-strokes, and the listing specifies compatibility with long or short shafts.

Skip it if you require a stated horsepower or weight ceiling before choosing a bracket; this listing supplies neither rating for the 550416.

This is a fit for four-stroke auxiliary-motor owners who need substantial vertical travel and manual repositioning across changing conditions. The listing notes long and short shafts, but does not provide a horsepower or weight ceiling to compare with your motor.

Listed on Amazon as: Marinetech Panther ATV Panther 550416 Auxiliary Outboard 4-Stroke Motor Bracket – 16" Vertical Travel

#3 · Saltwater Use

3. Panther 55-0410

• Material: Aluminum
• Weight: 19 lb
• Material Type: Aluminum

Best for: Four-stroke five-position bracket.

Why it ranks #3: Designed for 4-stroke motors, this anodized aluminum bracket has five running positions, stainless torsion springs, and a listed saltwater use recommendation.

Five vertical running positions let the Panther 55-0410 adjust a trolling or auxiliary motor as water or load conditions change. Its anodized aluminum construction is specified for the increased weight and torque of four-strokes, and the listing identifies saltwater use for this manually adjusted bracket.

The five positions support changes in motor height for varying water or load conditions, while a hand-turned knob provides the manual adjustment method. Stainless steel torsion springs counterbalance motor weight during repositioning. The anodized aluminum bracket is described as handling the increased weight and torque output of four-strokes, including long- or short-shaft motors. A two-inch-thick, extra-wide mounting board is also listed, giving the motor a substantial mounting surface; the product is recommended for saltwater use.

Skip it if you need a stated horsepower or weight limit to verify your motor against; this Panther listing supplies neither rating.

This suits saltwater boaters fitting a four-stroke trolling or auxiliary motor who want five positions and knob-operated adjustment. The listing mentions long and short shafts, but provides no horsepower or weight ceiling for final motor matching.

Listed on Amazon as: Panther 55-0410 Auxiliary Outboard 4-Stroke Motor Bracket – 10"

#4 · Best 20 HP Fit

4. YaeMarine 7953A

• Material: Aluminum, Stainless Steel

Best for: Wide-track 20 HP auxiliary support.

Why it ranks #4: Fits 2-stroke motors from 7.5 to 20 HP up to 115 pounds, with five positions, a 340 mm lift range, and an anodized aluminum frame.

A 340 mm lift range and five spring-loaded vertical positions give the YaeMarine bracket substantial room to reposition a compatible kicker. Its anodized aluminum frame, stainless steel springs, and wide-track body combine the listed marine materials with a stability-focused layout for powerboats and sailboats.

YaeMarine specifies this bracket for 7.5–20 HP two-stroke motors weighing up to 115 pounds, clarifying the engine range before installation. The 340 mm lift range and five vertical positions support height changes, while the spring-loaded mechanism assists with adjustment. A wide-track body is listed for added stability, and the solid polypropylene board measures 260 × 205 mm. The boat mounting area is 135 × 230 mm, with 8 mm mounting holes, providing dimensions to plan the transom installation.

Skip it if you need a bracket for a four-stroke motor; the YaeMarine listing specifies two-stroke engines, while Marinetech Panther 550407AL lists both engine types.

This suits owners of small or medium powerboats and sailboats with a compatible two-stroke kicker who want a long lift range and five settings. Use the board and transom dimensions to plan mounting on your boat.

Listed on Amazon as: YaeMarine 7.5hp-20hp Heavy Duty Aluminium Marine Outboard Auxiliary Boat Motor Bracket(7953A)

#5

5. Marinebaby CZX7953AA

• Material: Aluminum
• Weight: 4.94 kg
• Material Type: Aluminum

Best for: Adjustable two-stroke kicker support.

Why it ranks #5: Its aluminum frame supports 2-stroke motors from 7.5 to 20 HP and offers five locking heights from 195 to 320 mm.

Five locking height positions across 195–320 mm give this Marinebaby bracket a useful adjustment range for setting a compatible auxiliary motor to changing conditions. Its stainless steel counterbalance springs help manage motor weight during lifting, while the polypropylene mounting board provides a solid surface for the motor clamp.

The aluminum bracket is specified for 7.5–20 HP two-stroke motors, giving owners of compatible kickers a clear engine-type and power range to work within. Five locking positions from 195 to 320 mm let you change the motor’s vertical setting, while the stainless steel springs counterbalance its weight during adjustment. The 205 × 260 mm board and 132 × 230 mm mounting area are useful dimensions to check against your transom; mounting hardware is not included.

Skip it if you need a bracket supplied with mounting hardware; this package includes the bracket only and requires 8 mm screws.

This suits boaters fitting a 7.5–20 HP two-stroke auxiliary motor who value spring-assisted lifting and several height settings. Check the stated mounting dimensions and arrange the required 8 mm screws separately before installation.

Listed on Amazon as: Boat Outboard Motor Bracket, Aluminum Boat Engine Support 20 HP

#6

6. Mojiate M5379AA

• Material: Aluminum
• Weight: 11 lb
• Material Type: Aluminum

Best for: Two-stroke motors up to 115 lb.

Why it ranks #6: Designed for 2-stroke motors from 7.5 to 20 HP, it lists a 115-pound maximum and combines a welded aluminum frame with stainless springs.

A reinforced welded aluminum frame supports this Mojiate bracket’s stated range of 7.5–20 HP two-stroke motors, with a maximum motor weight of 115 pounds. Heavy-duty stainless steel springs and a solid plastic mounting board complete the lifting and mounting arrangement for small- to medium-sized powerboats and yachts.

The 7.5–20 HP range and 115-pound maximum weight set the applicable motor limits, while the listing specifically advises against four-stroke use. Its reinforced welded aluminum frame provides the structural support described for heavy use, and stainless steel springs help lift and balance the motor. The solid plastic mounting board gives the clamp a mounting surface. Together, these details make it a focused option for owners of compatible two-stroke auxiliary motors rather than a general four-stroke bracket.

Skip it if you have a four-stroke auxiliary motor; this Mojiate bracket is specifically not recommended for that engine type.

Choose it for a 7.5–20 HP two-stroke motor weighing no more than 115 pounds on a small or medium powerboat or yacht. Its stated four-stroke restriction is decisive, so engine type must match before purchase.

Listed on Amazon as: 2 Stroke Marine Outboard Motor Support, 7.5HP-20HP Outboard Motor Bracket for Boat, Heavy Duty Aluminum Boat Engine Motor Kicker with Plastic Mounting Plate, Max Load 20HP

#7

7. Vinland Marine 7951S

• Material: Nylon Base
• Material Type: Nylon Base

Best for: Stainless 20 HP canoe mount.

Why it ranks #7: Its 304 stainless steel construction, five positions, and stated 20 HP or 115-pound capacity suit buyers prioritizing a corrosion-resistant mount.

A 304 stainless steel bracket with a black polypropylene mounting board gives the Vinland Marine mount a distinctive metal-and-polymer construction for auxiliary motors up to 20 HP and 115 pounds. Five spring-loaded vertical positions and a wide-track body support adjustable placement and the listed stability-focused setup.

The 20 HP and 115-pound capacity defines the motor limits, while the listing identifies use on jon boats, bass trackers, and canoes. Five vertical positions let you select a motor height, and torsion springs assist the spring-loaded adjustment. A wide-track body is specified for added stability, and the reinforced welded frame with stamped stainless components adds detail to the bracket construction. The polypropylene board provides the mounting surface, so buyers can assess this option against their boat and motor arrangement.

Skip it if you need a stated travel distance to compare adjustment range; this Vinland listing gives five positions but no travel measurement.

This suits canoe, jon-boat, or bass-tracker owners mounting a motor within the 20 HP and 115-pound limits. Its five settings help with height selection, but buyers who prioritize a stated travel distance should account for that missing measurement.

Listed on Amazon as: Vinland Marine Outboard Motor Mount Bracket for 20hp Outboard Motor w/Black PP Base, Kicker Motor Bracket, Canoe Motor mounting Bracket, Boat Motor Mount, Lift up Jack Plate, transom Board

#8

8. Haida 20 HP Bracket

• Material: Plastic, Stainless Steel
• Weight: 4.06 kg
• Material Type: Plastic, Stainless Steel

Best for: Two-position 20 HP kicker bracket.

Why it ranks #8: This bracket is designed for motors up to 20 HP and has two vertical running positions, but its listed fit is limited to most 2-stroke motors.

Two vertical running positions give the Haida bracket a straightforward way to lock a compatible auxiliary motor up or down. Its stainless steel construction and plastic base pair a metal support structure with a broad mounting platform, while its stated limit of up to 20 HP helps define the intended engine range.

Haida lists this bracket for most styles of two-stroke outboard motors up to 20 HP, making engine type an important part of the fit decision. The two vertical running positions let you secure the motor in either an up or down position, a simple workflow for switching between stowed and running use. Its 8 × 85⁄8-inch mounting size and 81⁄4 × 103⁄8-inch overall board dimensions help you assess the space available on a sailboat or powerboat transom.

Skip it if you want several incremental height settings; the Haida offers two running positions rather than a multi-stop adjustment range.

Choose this for a compatible two-stroke kicker on a sailboat or powerboat when up-or-down locking meets your needs. Its two-position adjustment is the key boundary for buyers seeking finer height selection.

Listed on Amazon as: 2 Stroke Outboard Motor Bracket Kicker for Boat up to 20HP, Auxiliary Heavy Duty Marine Motor Bracket Max Load 20HP

#9

9. Helmspire 20 HP Bracket

• Material: Stainless Steel
• Material Type: Stainless Steel

Best for: Stainless two-stroke backup mount.

Why it ranks #9: The stainless steel bracket offers adjustable locking positions and broad boat-use recommendations, but the supplied details do not state a weight limit or travel range.

Marine-grade stainless steel with corrosion-resistant hardware is the Helmspire bracket’s defining construction, with the listing specifying use in both freshwater and saltwater. Its adjustable locking positions let owners select motor height for different water conditions, transoms, and shaft lengths, making it relevant for auxiliary and emergency-backup duties.

The title identifies a 20 HP, two-stroke bracket, while the listed recommended uses include fishing boats, motorboats, pontoons, sailboats, and small recreational vessels. Adjustable locking positions allow height selection for differing water conditions, transoms, and shaft lengths, connecting the adjustment to practical setup needs. Stainless steel construction and corrosion-resistant hardware are stated for freshwater and saltwater environments. The listing also names trolling, everyday boating, locks, and emergency backup as intended uses.

Skip it if you need a listed weight ceiling or measured travel range; Helmspire’s supplied details specify neither for this bracket.

This suits boaters seeking a stainless two-stroke auxiliary or backup mount for fishing, cruising, or lock use in freshwater or saltwater. Check the motor’s weight separately, since no maximum weight is stated in the supplied details.

Listed on Amazon as: 2 Stroke Outboard Motor Bracket, 20 HP Outboard Motor Support

#10

10. Marinetech Panther 550021

• Material: Plastic
• Material Type: Plastic

Best for: Freshwater 20 HP manual bracket.

Why it ranks #10: It supports motors up to 20 HP or 115 pounds with 11 inches of travel, but is for freshwater and explicitly must not be used with 4-stroke engines.

Eleven inches of travel across five stops gives the Marinetech Panther 550021 a defined adjustment range for freshwater auxiliary motors. It is rated for up to 20 HP or 115 pounds and uses a spring-loaded, manually operated bracket, with listed use on both powerboats and sailboats.

The 20 HP or 115-pound limit gives buyers two clear motor constraints, and the listing specifies freshwater use only. Five stops across 11 inches of travel let you set the bracket at different heights, while manual operation means raising or lowering the motor does not require power. The 8.5 × 10.5 × 1.75-inch motor pad gives a useful mounting reference. Panther warns that this bracket must not be used without its safety cable, which is not included, and excludes four-stroke engines.

Skip it if you run a four-stroke motor or boat in saltwater; this model is restricted to freshwater and excludes four-stroke engines.

This fits freshwater powerboat or sailboat owners with a motor up to 20 HP and 115 pounds who want manual height adjustment. It is not for four-strokes, and the required safety cable must be obtained separately.

Listed on Amazon as: Marinetech Panther 550021 Outboard Aluminum Motor Bracket