Best Ramp Gate For Trailer: Tailgate Lift Assist Options

#1 · Best Overall

1. GORILLA-LIFT Tailgate Lift Assist

• Material: Alloy Steel

Best for: Heavy Utility Trailer Owners.

Why it ranks #1: Its two-sided, adjustable design suits open utility trailers, and the listing gives a 300-pound maximum towing capacity for heavy gates.

The enclosed, two-sided lift-assist assembly makes most heavy-duty utility tailgates feel virtually weightless, so one person can raise or lower the gate with a light touch. Its adjustable setup accommodates different tailgate weights, while the design also aims to reduce hinge damage and gate warping.

For owners handling a heavy utility or ATV trailer gate, the two-sided assembly helps distribute assistance across the tailgate rather than leaving the lift to one side. Its adjustment for different gate weights offers flexibility when the gate is not a standard weight, and the enclosed construction keeps the lift-assist mechanism housed. The listing describes compatibility with open utility trailers with side rails, but does not provide a complete rail-height range in the supplied details, so check the listed fit information before choosing.

Skip it if you need a clearly stated rail-height range; JY PERFORMANCE DAC791 specifies 12-to-24-inch rails and 4-to-6-foot gates.

Choose the GORILLA-LIFT if you want adjustable, two-sided assistance for a heavy open utility or ATV trailer tailgate. Its fit information is less specific than some listings, so establish compatibility with your trailer before buying.

Listed on Amazon as: Genuine GORILLA-LIFT 2-Sided Trailer Tailgate Lift Assist

#2 · Highest Capacity

2. Gledewen Trailer Gate Lift Assist

• Material: Alloy Steel

Best for: Heavy Gates Up to 400 Pounds.

Why it ranks #2: The stated maximum is 400 pounds, with compatibility for 10- to 24-inch side rails and ramps 4 to 6 feet high.

A stated maximum gate weight of 400 pounds sets the Gledewen lift-assist apart for buyers with especially heavy utility-trailer ramps. Its two-sided system is described as making the tailgate easy to lift with one hand after installation, and the maker says installation takes about 30 minutes.

The system fits trailers with side rails 10 to 24 inches above the bed and gates or ramps 4 to 6 feet tall, giving buyers concrete dimensions to compare with their trailer. Its 400-pound maximum gate or ramp weight provides a clear upper boundary, while the two-sided assistance supports one-person operation after fitting. The listing estimates a 30-minute installation, which helps with planning, but gives no specific drilling or mounting procedure in the supplied details.

Skip it if you have a gate over 400 pounds; VEVOR 5806 is also limited, at 180 pounds, so neither listed capacity suits that load.

Consider this Gledewen system if your trailer falls within its rail and gate dimensions and its ramp weighs no more than 400 pounds. It targets one-person lifting, with installation estimated at 30 minutes.

Listed on Amazon as: Trailer Gate Lift Assist, Compatible with Utility Trailer Ramp and Tailgate

#3 · Aluminum Rollers

3. Gledewen Upgrade Lift Assist

• Weight: 31.4 lb

Best for: Roller Upgrade for Sticking Gates.

Why it ranks #3: Its upgrade replaces plastic rollers with aluminum alloy rollers; the listing describes a two-sided system for utility trailer ramps.

Four aluminum-alloy rollers are the defining upgrade in this Gledewen lift-assist kit, aimed at replacing plastic rollers that can break and leave a gate sticking. The maker describes the metal rollers as wear-resistant and claims five times the service life of plastic ones.

The upgrade addresses roller wear directly: the supplied description says the aluminum-alloy rollers are solid and wear-resistant, with five times the service life of plastic rollers. That can matter when a lift or gate door has become inflexible or stuck because its original rollers broke. The kit includes two spring-and-cable assemblies and four housing pieces with differing end cuts, plus mounting hardware. The listing estimates installation at 30 minutes, though no gate-weight capacity appears in the supplied details.

Skip it if you need a stated load limit before selecting a lift assist; Gledewen XLB10 lists a 400-pound maximum gate or ramp weight.

Pick this Gledewen upgrade if broken plastic rollers are the problem and you want the included aluminum-alloy replacements with a two-sided lift system. The supplied details do not give a load limit, so that boundary remains unclear.

Listed on Amazon as: Trailer Gate Lift Assist (Upgrade), Fit for Utility Trailer Ramp Tailgate

#4 · Dual-Side Support

4. VIVBOO Trailer Tailgate Lift Assist

• Weight: 27.4 lb
• Dimensions: 36.61"L x 8.5"W x 3.35"H
• Material: Alloy Steel

Best for: Balanced Dual-Side Farm Hauling.

Why it ranks #4: This two-sided system lists a 300-pound load capacity and includes stainless steel cables, rollers, and complete fastener hardware.

A symmetric dual-spring layout gives the VIVBOO lift assist its central advantage: balanced force on both sides of a heavy ramp. The maker says that dual-side support reduces pulling effort and distributes pressure evenly, targeting regular farm, landscaping, and backyard hauling work.

The enclosed lift construction and symmetric spring arrangement are intended to spread pressure across the tailgate, helping reduce long-term abrasion and uneven wear. Dual-side assistance also cuts the effort needed to open and close the ramp, a useful combination for frequent hauling tasks. VIVBOO lists a 300-pound capacity and includes square tubes, extension springs, stainless-steel cables, rollers, and fastener hardware. Its title specifies 12-to-24-inch rails and 4-to-6-foot ramps, dimensions to compare with your trailer.

Skip it if you need support above 300 pounds; Gledewen XLB10 specifies a 400-pound maximum gate or ramp weight.

The VIVBOO suits farm, landscaping, and backyard hauling where a dual-sided system can reduce effort on a gate within its 300-pound limit. Check that your rail height and ramp height match the listed ranges.

Listed on Amazon as: Trailer Tailgate Lift Assist for Open-Utility 12-24" Rail 4-6ft Ramp

#5

5. JY PERFORMANCE Gate Lift Assist

• Weight: 27 lb
• Dimensions: 37"L x 6"W x 5"H

Best for: Drill-Ready Utility Trailer Owners.

Why it ranks #5: Its two-sided system fits most open utility trailers with 12- to 24-inch rails and 4- to 6-foot gates, with a 300-pound load capacity.

A two-sided lift-assist system paired with a stated 12-to-24-inch rail and 4-to-6-foot gate fit gives this JY PERFORMANCE kit a clearly defined target. It makes the ramp easier to lift by hand after installation and aims to reduce uneven stress on the gate and trailer.

The paired sides are intended to prevent uneven stress and wear, a practical consideration for a ramp that is raised and lowered regularly. JY PERFORMANCE lists compatibility with most open utility trailers whose rails measure 12 to 24 inches and whose tailgates or ramps stand 4 to 6 feet high. Installation requires drilling, so plan for that work; once installed, the gate can be lifted by hand. The system has a stated 300-pound load capacity.

Skip it if you want installation without drilling; VEVOR 5806 lists a single-sided assist and does not specify drilling in the supplied details.

This kit suits owners of open utility trailers that match its stated rail and gate dimensions and who can accommodate drilling during installation. Its two-sided support and 300-pound capacity are relevant for regularly handled ramps within those limits.

Listed on Amazon as: Trailer Gate Lift Assist for Open Utility Trailer Tailgate Ramp

#6

6. NAZOU Tailgate Lift Assist Kit

• Weight: 22 lb
• Dimensions: 36"L x 5"W x 6"H
• Material: Alloy Steel

Best for: Daily Utility Trailer Hauling.

Why it ranks #6: The two-sided kit has integrated ramp springs and a listed 300-pound load capacity, but its provided fit dimensions are less specific.

Integrated ramp springs give the NAZOU kit its practical focus: easing the lifting and lowering of heavy-duty trailer gates during regular utility-trailer use. Its two-sided assistance is also intended to balance support, reduce gate strain, and help limit panel deformation and hinge wear.

The two-sided setup is intended to reduce uneven wear by supporting the gate from both sides, while integrated ramp springs assist smooth lifting and lowering. Together, those features address both the effort of handling a heavy ramp and the strain repeated operation can put on panels and hinges. NAZOU lists a 300-pound load capacity and alloy-steel construction. The supplied details do not state rail-height or gate-height compatibility, so compare your trailer dimensions with the product's fit information before installation.

Skip it if you require specified rail and gate dimensions; Gledewen XLB10 lists 10-to-24-inch rails and 4-to-6-foot gates or ramps.

This NAZOU kit suits daily utility-trailer users seeking spring-assisted, two-sided support for gates within its 300-pound capacity. Its fit dimensions are not stated in the supplied details, so establish compatibility before selecting it.

Listed on Amazon as: NAZOU Trailer Tailgate Lift Assist Kit

#7 · Single-Side Option

7. VEVOR Tailgate Lift Assist

• Weight: 14.6 lb
• Dimensions: 35.83 x 1.97 x 1.97 in

Best for: Lighter Single-Side Gate Loads.

Why it ranks #7: This is the only listing identified as one-sided, and its 180-pound maximum capacity is lower than the other stated limits.

A 180-pound maximum capacity makes the VEVOR lift assist a defined option for lighter open-utility-trailer gates. Its spring and 1.47-meter extension cable let the tailgate move with a single-hand push or pull, while the stated rail and gate dimensions help buyers assess fit.

VEVOR specifies side rails 10 to 24 inches high and tailgates or ramps 4 to 6 feet tall, which gives buyers useful dimensions to compare before installation. The spring and 1.47-meter extension cable support single-hand lifting and lowering, and the 180-pound maximum sets a clear boundary for the gate load. The model number identifies a single-sided version, so buyers seeking assistance on both sides should weigh that layout against their intended setup.

Skip it if you need two-sided support or have a gate above 180 pounds; GORILLA-LIFT GOR2LIFT offers an enclosed two-sided assembly.

Choose the VEVOR if your open utility-trailer gate matches its listed dimensions, weighs no more than 180 pounds, and a single-sided assist suits your setup. Its stated load limit is the key boundary for heavier ramps.

Listed on Amazon as: VEVOR Trailer Tailgate Lift Assist, Max 180 lbs Load Capacity, Compatible with Open Utility Trailer Tailgate and Ramp, with 10 to 24 Inches Heights Side Rail and 4 to 6 Feet Height Tail Gate or Ramp