Best Power Tilt And Trim For Small Outboard Engines

#1 · Best Overall

1. T-H Marine CMC PT-35

• Weight: 24 lb

Best for: Clamp-on or bolt-on motors.

Why it ranks #1: Rated for 35 HP and smaller, with a 5.5-inch setback, 84 degrees of trim and tilt, and clamp-on or bolt-on mounting without an adapter.

Compatibility with clamp-on or bolt-on motors without an adapter distinguishes T-H Marine’s CMC PT-35 from units requiring a separate adapter. The listing rates it for 35 HP and smaller engines and specifies 5.5 inches of setback, offering a defined small-outboard application and mounting detail.

The stated clamp-on and bolt-on compatibility without an adapter gives buyers a practical mounting detail to check against their motor, while the 35 HP rating defines the engine-size boundary. A 5.5-inch setback is specified to enhance stability and performance, and the 84 degrees of trim and tilt describes the unit’s stated movement range. Aluminum construction with stainless-steel fasteners provides the listed material combination for marine use.

Skip it if you have an engine above 35 HP; the Winibo QX90 listing covers outboards up to 90 HP.

This T-H Marine CMC PT-35 is a fit to consider for owners of motors rated at 35 HP or less who need clamp-on or bolt-on mounting without an adapter. Its engine rating is the principal boundary.

Listed on Amazon as: T-H Marine – 3002.1017 52100 CMC PT-35 Tilt and Trim for up to 35 HP

#2 · Wiring Kit Included

2. Bzcovac PT-35 Unit

• Weight: 19.5 lb
• Material Type: Aluminum
• Material: Aluminum

Best for: Small motors needing setback.

Why it ranks #2: Designed for up to 35 HP and includes a wiring kit; its 5.5-inch setback is listed as supporting stability and prop positioning.

A 5.5-inch setback is the defining feature of Bzcovac’s PT-35, intended to enhance stability and give the prop a better bite at a higher prop setting. Rated for up to 35 HP in its title, this electric-hydraulic unit also raises the motor with a switch to protect the prop in shallow water or around debris.

The listed 5.5-inch setback links the PT-35’s mounting position to its stated stability benefit and improved prop bite at a higher setting, making it relevant to buyers considering those handling effects. Switch-activated raising can help keep the prop clear of shallow water or debris, while also reducing the strain of manually tilting the motor. The package includes a wiring kit, and the aluminum unit weighs 19.5 pounds.

Skip it if you have an engine above 35 HP; T-H Marine’s CMC PT-35 listing also caps its rating at 35 HP, so consider a higher-rated unit instead.

Small-outboard owners seeking setback and switch-operated raising for shallow-water protection can consider this PT-35. Its title specifies up to 35 HP, so the stated engine ceiling is the key boundary for choosing it.

Listed on Amazon as: 3002.1017 52100 for CMC PT-35 Tilt and Trim up to 35 HP – Outboard Motor Electric Hydraulic Power Trim & Tilt Unit

#3 · Mercury 4-Stroke Fit

3. Winibo 60 HP Assembly

• Weight: 11.2 lb
• Material Type: Alloy Steel, Aluminum
• Material: Alloy Steel, Aluminum

Best for: Mercury 35–60 HP replacement.

Why it ranks #3: Fits listed Mercury F35, F40, F50, and F60 four-stroke models, covering small engines through 60 HP with an alloy-steel and aluminum build.

Mercury F35–F60 four-stroke compatibility is the defining feature of Winibo’s 8M0055011 assembly, giving owners in that range a specifically identified replacement option. Its stated fit covers 35, 40, 50, and 60 HP models, while the assembly’s trim adjustment supports changing engine position underway.

Winibo lists the 8M0055011 along with replacement numbers 893517T01, 855654T09, 855654T08, and 855654T4, which helps owners compare the assembly with an existing part reference. The stated Mercury F35–F60 four-stroke compatibility narrows its intended application to those engines rather than a universal fit. Its alloy-steel and aluminum construction is identified as corrosion-resistant, and the product description connects precise tilt adjustment with reduced turbulence and vibration during navigation.

Skip it if you have an engine above 60 HP; this assembly is listed for Mercury F35–F60 four-stroke models.

For owners replacing a trim assembly on a listed Mercury F35–F60 four-stroke, this unit offers specific model-range and replacement-number references. Its stated ceiling is 60 HP, so it is not the match for larger engines.

Listed on Amazon as: 8M0055011 Outboard Power Tilt & Trim Assembly up to 60HP

#4

4. RisWhiteMeteors 40–60 HP Assembly

Best for: Mercury and Mariner 40–60 HP.

Why it ranks #4: A direct-replacement electric-hydraulic assembly for Mariner and Mercury 40–60 HP outboards, with specified replacement numbers and marine-grade construction.

Direct replacement language for OE numbers 830150T10, 8M0055006, and 8M0055011 is the clearest distinction of this RisWhiteMeteors assembly. It is listed for Mariner and Mercury 40–60 HP outboards, with electric operation and hydraulic lifting intended to provide smooth, stable movement.

The stated 40–60 HP Mariner and Mercury range gives owners a defined engine category to compare with their existing installation. Matching the listed OE references can help identify whether this is the replacement assembly they are seeking. Its electrically operated hydraulic system is described as providing smooth lifting, strong power, and stable operation. The marine-grade, corrosion-resistant structure and ready-for-installation description speak to use in a marine setting and installation workflow.

Skip it if you have an outboard outside the listed Mariner and Mercury 40–60 HP range; Winibo’s QX90 is listed for motors up to 90 HP.

This assembly is for owners replacing a unit on a Mariner or Mercury 40–60 HP outboard, especially when one of its named OE references matches. Its listed engine range is the main fit boundary.

Listed on Amazon as: 8M0055011 830150T10 8M0055006 Electrically Hydraulic Power Trim &Tilt Compatible with Mariner Mercury Outboard 40-60HP

#5 · Two-Year Warranty

5. SHIPUNAYE 40–60 HP Assembly

Best for: 40–60 HP four-stroke lifts.

Why it ranks #5: Its listed 40–60 HP range suits mid-size outboards, and the product description specifies a two-year manufacturer warranty and standardized wiring.

Smooth, steady raising and lowering with precise angle adjustment is the key operating feature highlighted for SHIPUNAYE’s 40–60 HP four-stroke assembly. The listing connects those adjustments to adapting the motor’s entry angle to boat speed, load, and water conditions, giving owners a specific handling use case.

The aluminum-alloy construction is described as offering strength and weather endurance, while smooth, steady motor movement supports controlled adjustment of the engine angle. The listing says that angle can adapt to boat speed, load, and water conditions, which gives the adjustment a practical navigation role. Standardized wiring is described as supporting reliable electrical connections, and smooth edges are intended to reduce scratches during installation and everyday handling.

Skip it if you need a stated range above 60 HP; Winibo’s 8M0090335 assembly is listed for Mercury engines up to 115 HP.

Owners of 40–60 HP four-stroke outboards seeking controlled angle adjustments can consider this assembly, particularly where standardized wiring and smooth edges matter during installation. Its listed engine range is the key fit boundary.

Listed on Amazon as: Outboard Power Trim and Tilt Assembly, 40-60 HP 4-Stroke Electric Motor Lift Kit, Hydraulic Tilt Trim Unit for Boat Engine Mounting Bracket Replacement

#6 · Highest Load Capacity

6. Winibo QX90 Jack Plate

• Weight: 32 lb
• Material Type: Aluminum-Alloy, Stainless Steel
• Material: Aluminum-Alloy, Stainless Steel

Best for: 90 HP jack-plate applications.

Why it ranks #6: Rated for outboards up to 90 HP and lists a 330-pound load capacity, but its 32-pound weight and jack-plate style are less targeted to small engines.

A 330-pound load capacity distinguishes Winibo’s QX90 electric power tilt trim jack plate, giving buyers a defined capacity figure alongside its stated fit for outboard motors up to 90 HP. Its aluminum-alloy and stainless-steel materials also specify the construction used for this boat-oriented assembly.

The QX90 is identified as an electric power tilt trim jack plate, making that configuration the key installation consideration for buyers comparing it with other trim assemblies. Its listed 330-pound load capacity gives a concrete rating to evaluate for an intended setup, while the stated outboard ceiling is 90 HP. Dimensions of 18.5 by 16.9 by 10.2 inches and a 32-pound weight are useful planning details for handling and available mounting space.

Skip it if you need a listed engine range below 90 HP with model-specific fit details; this listing gives a broad ceiling, not a model list.

This QX90 suits boat owners evaluating an electric jack-plate-style trim unit for an outboard up to 90 HP. Check that its stated capacity, 18.5-by-16.9-by-10.2-inch dimensions, and installation format fit the intended setup.

Listed on Amazon as: Power Tilt and Trim Unit for Outboard Motor Up to 90HP (Gray)

#7

7. Vrtfil 90 HP Tilt Trim

• Weight: 34.8 lb

Best for: Multi-brand motors up to 90 HP.

Why it ranks #7: Lists compatibility with 15–90 HP engines across several brands, but provides fewer mounting and weight details than the smaller-engine-specific options.

The listing pairs an IP68 waterproof rating with compatibility across several outboard brands, distinguishing Vrtfil’s electric-hydraulic tilt trim unit for marine buyers. It names Yamaha, Honda, Evinrude, Mercury, Suzuki, OMC, Mariner, Johnson, Tohatsu, Nissan, and Mercruiser engines, with a stated ceiling of 90 HP.

The stated IP68 rating is a relevant specification for a marine transom actuator, while the broad brand list gives owners multiple makes to evaluate against their engine. The listing specifies compatibility up to 90 HP, setting a clear upper boundary for its stated range. Its title identifies the product as an electric-hydraulic jack plate for outboard motors, and the listed 34.8-pound weight is useful when planning handling during installation.

Skip it if you have an engine above 90 HP; this unit’s stated ceiling is 90 HP.

Vrtfil is worth considering for boat owners seeking a multi-brand electric-hydraulic unit for an outboard up to 90 HP. Its IP68 rating is stated in the title; the listed 34.8-pound weight remains a handling consideration.

Listed on Amazon as: Power Tilt Trim Unit, Electric Hydraulic Jack Plate for Outboard Motor, Marine Transom Actuator, IP68 Waterproof Black, Fits Up to 90 HP Outboard Engines

#8

8. Winibo 115 HP Assembly

• Weight: 11.4 lb
• Material Type: Alloy Steel, Aluminum
• Material: Alloy Steel, Aluminum

Best for: Mercury 75–115 HP four-strokes.

Why it ranks #8: Compatible with listed Mercury F75–F115 and 75–115 HP four-stroke models, making its capacity a poor match for buyers focused on small outboards.

Compatibility with Mercury F-75 through F-115 four-strokes and a stated 115 HP ceiling distinguish Winibo’s 8M0090335 assembly. The listing also specifies two-wire operation and replacement references 8M0090335 and 8M0171818, giving owners of those engines concrete details to compare with their existing unit.

The listed Mercury F-75, F-80, F-90, F-100, and F-115 compatibility defines the intended engine range, while the two-wire four-stroke specification further narrows the stated application. Replacement numbers 8M0090335 and 8M0171818 give owners references for identifying the assembly. Its alloy-steel and aluminum construction is described as corrosion-resistant, and the precise tilt adjustment is connected with reducing turbulence and vibration during navigation.

Skip it if you have an engine above 115 HP; this assembly’s stated upper limit is 115 HP.

Mercury F-75 through F-115 four-stroke owners needing a two-wire trim assembly can use the listed engine and replacement references to assess fit. Its stated 115 HP ceiling and Mercury-specific range define its boundaries.

Listed on Amazon as: 8M0090335 8M0171818 Outboard Power Tilt & Trim Assembly up to 115HP